- 您现在的位置：买卖IC网 > PDF目录271345 > SSG-01T-5 SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 0.1A, 30VDC, 1mm, PANEL MOUNT PDF资料下载
参数资料
| 型号： | SSG-01T-5 |
| 元件分类： | 开关 |
| 英文描述： | SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 0.1A, 30VDC, 1mm, PANEL MOUNT |
| 封装： | ROHS COMPLIANT |
| 文件页数： | 8/10页 |
| 文件大小： | 510K |
| 代理商： | SSG-01T-5 |
Subminiature Basic Switch
SSG
7
Precautions
■ Terminal Connections
When soldering a lead wire to a switch terminal, insert the wire con-
ductor into the hole of the switch terminal and take the following
steps promptly.
Make sure that the capacity of the soldering iron is 60 W maximum.
Do not take more than 5 s to solder the switch terminal. Improper
soldering involving an excessively high temperature or excessive
soldering time may deteriorate the characteristics of the Switch.
Be sure to apply only the minimum required amount of flux. The
SSG may have contact failures if flux intrudes into the interior of the
SSG.
Use the following lead wires to connect to the solder terminals.
Soldering Categories (Refer to the conditions of EN61058-1).
To automatically solder the Switch to a PCB in a soldering bath, com-
plete soldering within 5 seconds at a flux temperature of 250°C and
avoid the overflow of flux onto the surface of the PCB where the
Switch or other parts are mounted.
Wire the quick-connect terminals (#110) with receptacles. Insert the
terminals straight into the receptacles. Do not impose excessive
force on the terminal in the horizontal direction, otherwise the termi-
nal may be deformed or the housing may be damaged.
Insulation Distance
The Switch does not have a ground terminal. The minimum distance
through insulation (IEC61058-1) is 0.9 mm. If proper insulation for
the end product cannot be secured, additional insulation such as a
Separator or insulation cover should be attached.
Mounting
When securing the SSG, be sure to use M2.2 mounting screws and
tighten the screws with flat washers and spring washers securely
within a torque range between 0.20 to 0.24 N m (2 to 2.5 kgf cm).
Mounting Holes
Two 2.4-dia. mounting holes or M2.3 screw holes
Make sure that the plate to which the SSG is mounted is flat. If the
plate has protruding or warped part, the SSG may not operate prop-
erly.
Operating Stroke
Make sure that the operating stroke is 70% to 100% of the rated OT
distance. Do not operate the actuator exceeding the OT distance oth-
erwise the life expectancy of the SSG may be shortened.
Simulated Hinge Lever
Model
SSG-01L3
P
SSG-5L3
P
SSG-01L3P-5
SSG-5L3P-5
OF max.
0.60 N {61 gf}
0.20 N {20 gf}
RF min.
0.06 N {6 gf}
0.02 N {2 gf}
PT max.
—
OT min.
1.0 mm
MD max.
0.8 mm
FP max.
18.9 mm
OP
14.4+1.1/
-0.7 mm
Hinge Roller Lever
Model
SSG-01L2
P
SSG-5L2
P
SSG-01
L2P-5
SSG-5
L2P-5
OF max.
0.60 N {61 gf}
0.20 N {20 gf}
RF min.
0.06 N {6 gf}
0.02 N {2 gf}
PT max.
—
OT min.
1.0 mm
MD max.
0.8 mm
FP max.
22.4 mm
OP
17.9+1.1/
-0.7 mm
SSG-01L3
P
SSG-5L3
P
SSG-01
L3P-5
SSG-5L3P-5
SSG-01L2
P
SSG-5L2
P
SSG-01
L2P-5
SSG-5
L2P-5
Type
Conductor size
SSG-01
AWG 22 to 20
SSG-5
AWG 20 to 18
Type
Classified by EN61058-1
Solder terminal
Soldering iron used with soldering hole
Solder terminal type 1.2
PCB terminal
Soldering bath used
Solder terminal type 1.2
相关PDF资料 |
PDF描述 |
|---|---|
| SSG-5L3P-5 | SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 5A, 14VDC, 1.8mm, THROUGH HOLE-STRAIGHT |
| SWW249A-7X601U1715 | TOGGLE SWITCH, DPDT, LATCHED, 4A, 30VDC, THROUGH HOLE-RIGHT ANGLE |
| SWW249A-7X601U1717/1 | TOGGLE SWITCH, DPDT, LATCHED, 4A, 30VDC, THROUGH HOLE-RIGHT ANGLE |
| SWW237A-7X601U1714 | TOGGLE SWITCH, SPDT, MOMENTARY, 4A, 30VDC, THROUGH HOLE-RIGHT ANGLE |
| ST2-4L4S4V30BJ12 | ROCKER SWITCH, DPDT, LATCHED AND MOMENTARY, 0.02A, 20VDC, THROUGH HOLE-STRAIGHT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SSG037B5N | 功能描述:集管和线壳 SSG037B5N = SMT CONN RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| SSG037M6SN | 功能描述:集管和线壳 SSG037M6SN THRU-HOLE RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| SSG037PC2DNC30N | 功能描述:集管和线壳 SSG037PC2DNC30N WDUALOBE RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| SSG03X-1J | 制造商:EPCOS 制造商全称:EPCOS 功能描述:Switching spark gap |
| SSG0410 | 制造商:SECOS 制造商全称:SeCoS Halbleitertechnologie GmbH 功能描述:N-Ch Enhancement Mode Power MOSFET |
发布紧急采购，3分钟左右您将得到回复。