参数资料
型号: SST48CF048-C1
元件分类: PROM
英文描述: 24M X 16 FLASH 3.3V PROM CARD, 100 ns, XMA50
封装: CARD-50
文件页数: 2/62页
文件大小: 1077K
代理商: SST48CF048-C1
10
Data Sheet
CompactFlash Card
SST48CF008 / 016 / 024 / 032 / 048 / 064 / 096 / 128 / 192 / 256
2002 Silicon Storage Technology, Inc.
S71125-03-000
2/02
375
-CSEL
(PC Card Memory mode)
I
39
This signal is not used for this mode.
-CSEL
(PC Card I/O mode)
This signal is not used for this mode.
-CSEL
(True IDE mode)
This internally pulled up signal is used to configure this device as a
master or a slave when configured in the True IDE mode. When this
pin is grounded, this device is configured as a master. When the pin
is open, this device is configured as a slave.
D15 - D00
(PC Card Memory mode)
I/O
31,30,29,28,
27,49,48,47,
6,5,4,3,2,
23, 22, 21
These lines carry the Data, Commands and Status information
between the host and the controller. D00 is the LSB of the Even Byte
of the Word. D08 is the LSB of the Odd Byte of the Word.
D15 - D00
(PC Card I/O mode)
This signal is the same as the PC Card Memory mode signal.
D15 - D00
(True IDE mode)
In True IDE mode, all Task File operations occur in Byte-Mode on the
low order bus D00-D07 while all data transfers are 16 bit using D00-
D15.
GND
(PC Card Memory mode)
-
1,50
Ground.
GND
(PC Card I/O mode)
This signal is the same for all modes.
GND
(True IDE mode)
This signal is the same for all modes.
-INPACK
(PC Card Memory mode)
O
43
This signal is not used in this mode.
-INPACK
(PC Card I/O mode)
Input Acknowledge
The Input Acknowledge signal is asserted by the CompactFlash card
when the card is selected and responding to an I/O read cycle at the
address that is on the address bus. This signal is used by the host to
control the enable of any input data buffers between the Compact-
Flash card and the CPU.
-INPACK
(True IDE mode)
In True IDE mode this output signal is not used and should not be
connected at the host.
-IORD
(PC Card Memory mode)
I
34
This signal is not used in this mode.
-IORD
(PC Card I/O mode)
This is an I/O Read strobe generated by the host. This signal gates
I/O data onto the bus from the CompactFlash card when the card is
configured to use the I/O interface.
-IORD
(True IDE mode)
In True IDE mode, this signal has the same function as in PC card
I/O mode.
-IOWR
(PC Card Memory mode)
I
35
This signal is not used in this mode.
-IOWR
(PC Card I/O mode)
The I/O Write strobe pulse is used to clock I/O data on the card data
bus into the CompactFlash card controller registers when the Com-
pactFlash card is configured to use the I/O interface.
-IOWR
(True IDE mode)
The clocking will occur on the negative to positive edge of the signal
(trailing edge). In True IDE mode, this signal has the same function
as in PC Card I/O mode.
TABLE
2-2: SIGNAL DESCRIPTION (CONTINUED) (2 OF 4)
Symbol
Type1
Pin
Name and Functions
相关PDF资料
PDF描述
SST49LF008C-33-4C-NHE 1M X 8 FLASH 3V PROM, 11 ns, PQCC32
SSU-131MAT SLIDE SWITCH, SP3T, LATCHED, 0.3A, 4VDC, SURFACE MOUNT-RIGHT ANGLE
SSU-121ART SLIDE SWITCH, SPDT, LATCHED, 0.3A, 4VDC, SURFACE MOUNT-RIGHT ANGLE
SSW-102-22-F-D-VS 4 CONTACT(S), FEMALE, STRAIGHT TWO PART BOARD CONNECTOR, SURFACE MOUNT, SOCKET
SSW-102-22-F-S-VS 2 CONTACT(S), FEMALE, STRAIGHT TWO PART BOARD CONNECTOR, SURFACE MOUNT, SOCKET
相关代理商/技术参数
参数描述
SST48CF064 制造商:SST 制造商全称:Silicon Storage Technology, Inc 功能描述:CompactFlash Card
SST48CF064-C1 制造商:SST 制造商全称:Silicon Storage Technology, Inc 功能描述:CompactFlash Card
SST48CF096 制造商:SST 制造商全称:Silicon Storage Technology, Inc 功能描述:CompactFlash Card
SST48CF096-C1 制造商:SST 制造商全称:Silicon Storage Technology, Inc 功能描述:CompactFlash Card
SST48CF128 制造商:SST 制造商全称:Silicon Storage Technology, Inc 功能描述:CompactFlash Card