3
www.fairchildsemi.com
SSTV168
57
SSTVN16857
Absolute Maximum Ratings(Note 1)
Recommended Operating
Conditions (Note 3)
Note 1: The “Absolute Maximum Ratings” are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the “Electrical
Characteristics” table are not guaranteed at the absolute maximum ratings.
The “Recommended Operating Conditions” table will define the conditions
for actual device operation.
Note 2: IO Absolute Maximum Rating must be observed.
Note 3: The RESET input of the device must be held at VDD or GND to
ensure proper device operation. The differential inputs must not be floating,
unless RESET is asserted LOW.
DC Electrical Characteristics (SSTV16857) (2.3V d V
DD d 2.7V)
Supply Voltage (VDDQ)
0.5V to 3.6V
Supply Voltage (VDD)
0.5V to 3.6V
Reference Voltage (VREF)
0.5V to 3.6V
Input Voltage (VI)
0.5V to VDD 0.5V
Output Voltage (VO)
Outputs Active (Note 2)
0.5V to VDDQ 0.5V
DC Input Diode Current (IIK)
VI 0V
50 mA
VI ! VDD
50 mA
DC Output Diode Current (IOK)
VO 0V
50 mA
VO ! VDD
50 mA
DC Output Source/Sink Current
(IOH/IOL)
r50 mA
DC VDD or Ground Current
per Supply Pin (IDD or Ground)
r100 mA
Storage Temperature Range (Tstg)
65qC to 150qC
Power Supply (VDDQ)
SSTV16857
2.3V to 2.7V
SSTVN16857
2.5V to 2.7V
Power Supply (VDD)
Operating Range
VDDQ to 2.7V
Reference Supply (VREF VDDQ/2)
SSTV16857
1.15 to 1.35
SSTVN16857
1.25 to 1.35
Termination Voltage (VTT)VREF r 40 mV
Input Voltage
0V to VDD
Output Voltage (VO)
Output in Active States
0V to VDDQ
Output Current IOH/IOL
VDD 2.3V to 2.7V
SSTV16857
r20 mA
VDD 2.5V to 2.7V
SSTVN16857
r20 mA
Free Air Operating Temperature (TA)0qC to 70qC
Symbol
Parameter
Conditions
VDD
Min
Max
Units
(V)
VIKL
Input LOW Clamp Voltage
II 18 mA
2.3
1.2
V
VIKH
Input HIGH Clamp Voltage
II 18 mA
2.3
3.5
V
VIH-AC
AC HIGH Level Input Voltage
Data Inputs
VREF310mV
V
VIL-AC
AC LOW Level Input Voltage
Data Inputs
VREF310mV
V
VIH-DC
DC HIGH Level Input Voltage
Data Inputs
VREF150mV
V
VIL-DC
DC LOW Level Input Voltage
Data Inputs
VREF150mV
V
VIH
HIGH Level Input Voltage
RESET
1.7
V
VIL
LOW Level Input Voltage
RESET
0.7
V
VICR
Common Mode Input Voltage Range
CLK, CLK
0.97
1.53
V
VI(PP)
Peak to Peak Input Voltage
CLK, CLK
360
mV
VOH
HIGH Level Output Voltage
IOH 100 PA
2.3 to 2.7
VDD 0.2
V
IOH 16 mA
2.3
1.95
VOL
LOW Level Output Voltage
IOL 100 PA
2.3 to 2.7
0.2
V
IOL 16 mA
2.3
0.35
II
Input Leakage Current
VI VDD or GND
2.7
r5.0
PA
IDD
Static Standby
RESET
GND, IO 0
2.7
10
PA
Static Operating
RESET
VDD, IO 0
25
mA
VI VIH(AC) or VIL(AC)