- 您现在的位置：买卖IC网 > PDF目录385870 > ST6228CN1 (意法半导体) ER 3C 3#16S SKT RECP WALL PDF资料下载
参数资料
| 型号： | ST6228CN1 |
| 厂商： | 意法半导体 |
| 英文描述： | ER 3C 3#16S SKT RECP WALL |
| 中文描述： | 8位单片机与微控制器/ D转换器，自动重加载定时器，UART的秘书长办公室，安全复位和28引脚封装 |
| 文件页数： | 53/84页 |
| 文件大小： | 561K |
| 代理商： | ST6228CN1 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页当前第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页
53/84
53
ST62T28C/E28C
U. A. R. T
(Cont’d)
4.5.2 Clock Generation
The UART contains a built-in divider of the MCU
internal clock for most common Baud Rates as
shown in Table 19. Other baud rate values can be
calculated from the chosen oscillator frequency di-
vided by the Divisor value shown.
The divided clock provides a frequency that is 8
times the desired baud rate. This allows the Data
reception mechanism to provide a 2 to 1 majority
voting system to determine the logic state of the
asynchronous incoming serial logic bit by taking 3
timed samples within the 8 time states.
The bits not sampled provide a buffer to compen-
sate for frequency offsets between sender and re-
ceiver.
4.5.3 Data Transmission
Whatever the format selected as MCU option, 10-
bit or 11-bit frame, the start and stop bit are auto-
matically generated by the UART. Only the re-
maining 8 (Resp. 9) bit in the 10-bit (Resp. 11-bit)
frame are under control of the user.
Transmission is started by writing the Data Regis-
ter, after having previously set the transmission
software options, the baudrate and the parity ena-
ble. In case of 11-bit frame, the 9th bit must then
be set before into the LSB of the UART Control
Register. Bit 9 remains in the state programmed
for consecutive transmissions until changed by the
user oruntil a character is received when the state
of this bit is changed to that of theincoming bit 9.
The UARTOE signal switches the output multi-
plexer to the UART output and a start bit is sent (a
0 for one bit time) followed by the data bit with the
LSB D0 at first.. The output is then set to 1 for a
period of one bit time to generate a Stop bit, and
then the UARTOE signal returns the TXD1 line to
its alternate I/O function. The end of transmission
is flagged by setting TXMT to 1 and an interrupt is
generated if enabled. The TXMT flag is reset by
writing a 0 to the bit position, it is also cleared au-
tomatically when a new character is written to the
Data Register. TXMT can be set to 1 by software
to generate a software interrupt so care must be
taken in manipulating the Control Register.
4.5.3.1 Character Format
Once the MCU option is set as 10-bit or 11-bit
frame, the frame length is fixed. Within these8 or9
remaining bit, any format can be used as shown in
the Table 18. Only the even parity automatic com-
putation in the 10-bit frame is available. Any other
parity bit can however be software computed and
processed as a data bit
Table 18. Character Options
Figure 31. 11-bit Character Format Example
Figure 32. UART Data Output
10 bit frame
No Parity
1 Even Parity (Auto)
1 Software Parity
11 bit frame
1 Software Parity
No Parity
No Parity
1 Software Parity
Start Bit
Start Bit
Start Bit
8 Data
7 Data
7 Data
1 Stop
1 Stop
1 Stop
Start Bit
Start Bit
Start Bit
Start Bit
8 Data
9 Data
8 Data
7 Data
1 Stop
1 Stop
2 Stop
2 Stop
VR02012
POSITION
1
2
8
10
BIT
BIT
START
STOP
BIT
POSSIBLE
NEXT
CHARACTER
START
D0 D1
D7 D8
START OF DATA
9
TXD1
TXD
PORT DATA
OUTPUT
0
MUX
1
UARTOE
VR02011
相关PDF资料 |
PDF描述 |
|---|---|
| ST6228CN3 | CB 5C 5#16S PIN RECP WALL |
| ST6228CN6 | ER 5C 5#16S PIN RECP WALL |
| ST6391 | 8-BIT HCMOS MCUs FOR TV FREQUENCY SYNTHESIS WITH OSD |
| ST6392B1 | 8-BIT HCMOS MCUs FOR TV FREQUENCY SYNTHESIS WITH OSD |
| ST6393B1 | 8-BIT HCMOS MCUs FOR TV FREQUENCY SYNTHESIS WITH OSD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ST6228CN1/XXX | 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller |
| ST6228CN3 | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:8-BIT MCUs WITH A/D CONVERTER, AUTO-RELOAD TIMER, UART, OSG, SAFE RESET AND 28-PIN PACKAGE |
| ST6228CN3/XXX | 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller |
| ST6228CN6 | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:8-BIT MCUs WITH A/D CONVERTER, AUTO-RELOAD TIMER, UART, OSG, SAFE RESET AND 28-PIN PACKAGE |
| ST6228CN6/XXX | 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller |
发布紧急采购，3分钟左右您将得到回复。