Device configuration and ordering information
ST72324B-Auto
186/198
Doc ID13466 Rev 4
ST72324B-Auto Microcontroller FASTROM/ROM Option List
(Last update: July 2007)
Customer:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Address:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phone No:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The FASTROM/ROM code name is assigned by STMicroelectronics.
FASTROM/ROM code must be sent in .S19 format. .Hex extension cannot be processed.
Device Type/Memory Size/Package (check only one option):
----------------------------------------------------------------------------------------------------------------------------------------------------
FASTROM DEVICE:
32K
16K
8K
----------------------------------------------------------------------------------------------------------------------------------------------------
LQFP44 10x10:
[ ] ST72P324B(J6)T
[ ] ST72P324B(J4)T
[ ] ST72P324B(J2)T
LQFP32 7x17:
[ ] ST72P324B(K6)T
[ ] ST72P324B(K4)T
[ ] ST72P324B(K2)T
----------------------------------------------------------------------------------------------------------------------------------------------------
ROM DEVICE:
32K
16K
8K
----------------------------------------------------------------------------------------------------------------------------------------------------
LQFP44 10x10:
[ ] ST72324B(J6)T
[ ] ST72324B(J4)T
[ ] ST72324B(J2)T
LQFP32 7x7:
[ ] ST72324B(K6)T
[ ] ST72324B(K4)T
[ ] ST72324B(K2)T
----------------------------------------------------------------------------------------------------------------------------------------------------
Conditioning for LQFP package (check only one option):
[ ] Tape and Reel
[ ] Tray
Temperature range :
[ ] A (-40°C to +85°C)
[ ] B (-40°C to +105°C)
[ ] C (-40°C to +125°C)
[ ] D (-40°C to +150°C)
Special Marking:
[ ] No
[ ] Yes "_ _ _ _ _ _ _ _ _ _ "
LQFP32: 7 characters max. Other packages: 10 characters max.
Authorized characters are letters, digits, '.', '-', '/' and spaces only.
Clock Source Selection:
[ ] Resonator:
[ ] LP: Low power resonator (1 to 2 MHz)
[ ] MP: Medium power resonator (2 to 4 MHz)
[ ] MS: Medium speed resonator (4 to 8 MHz)
[ ] HS: High speed resonator (8 to 16 MHz)
[ ] Internal RC
[ ] External clock (sets MP medium power resonator in option byte)
PLL (1)(2)
[ ] Disabled
[ ] Enabled
LVD reset
[ ] Disabled
[ ] High threshold
[ ] Medium threshold
[ ] Low threshold
Reset delay
[ ] 256 cycles
[ ] 4096 cycles
Watchdog selection
[ ] Software activation
[ ] Hardware activation
Halt when Watchdog on
[ ] Reset
[ ] No reset
Readout protection
[ ] Disabled
[ ] Enabled
Date
. . . . . . . .
Signature . . . . . . . . . . . . . . . .
1. PLL must be disabled if internal RC network is selected.
2. The PLL can be enabled only if the resonator is configured to “Medium power: 2~4 MHz”.
CAUTION: The readout protection binary value is inverted between ROM and Flash products. The option byte checksum will
differ between ROM and Flash.