ST7L34, ST7L35, ST7L38, ST7L39
Device configuration and ordering information
Doc ID 11928 Rev 7
1.
combinations.
ST7L3 FASTROM and ROM microcontroller option list
(Last update: October 2007)
Customer:
.....................................................................
Address:
.....................................................................
Contact:
.....................................................................
Phone No:
.....................................................................
Reference/FASTROM or ROM code: ...............................
The FASTROM/ROM code name is assigned by STMicroelectronics.
FASTROM/ROM code must be sent in .S19 format. .Hex extension cannot be processed.
Device type/memory size/package (check only one option):
---------------------------------------------------------------------------------------------
FASTROM device 8K |
SO20
|
QFN20
---------------------------------------------------------------------------------------------
|
[ ] ST7PL34F2M
|
[ ] ST7PL34F2U
|
[ ] ST7PL35F2M
|
[ ] ST7PL35F2U
|
[ ] ST7PL38F2M
|
[ ] ST7PL38F2U
|
[ ] ST7PL39F2M
|
[ ] ST7PL39F2U
-----------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------
ROM device 8K
|
SO20
|
QFN20
----------------------------------------------------------------------------------------------
|
[ ] ST7L34F2M
|
[ ] ST7L34F2U
|
[ ] ST7L35F2M
|
[ ] ST7L35F2U
|
[ ] ST7L38F2M
|
[ ] ST7L38F2U
|
[ ] ST7L39F2M
|
[ ] ST7L39F2U
-----------------------------------------------------------------------------------------------
Conditioning:
[ ] Tape and reel
[ ] Tube
(check only one option)
Special marking:
[ ] No
[ ] Yes ".........................."
Authorized characters are letters, digits, '.', '-', '/' and spaces only.
Maximum character count: SO20 (8 char. max): ..........................
QFN20 (8 char. max): ..........................
Temperature range:
[ ] A (-40 to +85 °C)
[ ] C (-40 to +125 °C)
AWUCK selection:
[ ] 32 kHz oscillator
[ ] AWU RC oscillator
Clock source selection:
[ ] Resonator
[ ] VLP: Very low power resonator (32 to 100 kHz)
[ ] LP: Low power resonator (1 to 2 MHz)
[ ] MP: Medium power resonator (2 to 4 MHz)
[ ] MS: Medium speed resonator (4 to 8 MHz)
[ ] HS: High speed resonator (8 to 16 MHz)
[ ] External clock
[ ] on PB4
[ ] on OSCI
[ ] Internal RC oscillator
PLL:
[ ] Disabled
[ ] Enabled
LVD reset threshold:
[ ] Disabled
[ ] Enabled (highest voltage threshold)
Watchdog selection:
[ ] Software activation
[ ] Hardware activation
Watchdog reset on halt:
[ ] Disabled
[ ] Enabled
Flash devices only:
Sector 0 size:
[ ] 0.5 K
[ ] 1 K
[ ] 2 K
[ ] 4 K
Readout protection:
[ ] Disabled
[ ] Enabled
Flash write protection:
[ ] Disabled
[ ] Enabled
ROM devices only
ROM readout protection:
[ ] Disabled
[ ] Enabled
EEDATA readout protection:[ ] Disabled
[ ] Enabled
Comments:
.............................
Supply operating range in the application:
.............................
Notes:
.............................
Date:
.............................
Signature:
...........................