- 您现在的位置：买卖IC网 > PDF目录380757 > ST93C46TB3013TR (意法半导体) 1K 64 x 16 or 128 x 8 SERIAL MICROWIRE EEPROM PDF资料下载
参数资料
| 型号： | ST93C46TB3013TR |
| 厂商： | 意法半导体 |
| 英文描述： | 1K 64 x 16 or 128 x 8 SERIAL MICROWIRE EEPROM |
| 中文描述： | 每1000 64 x 16或128 × 8 MICROWIRE的串行EEPROM的 |
| 文件页数： | 8/13页 |
| 文件大小： | 111K |
| 代理商： | ST93C46TB3013TR |
AI00879B
S
ERASE
1 1
D
Q
ADDR
OP
CODE
1
BUSY
READY
CHECK
STATUS
S
ERASE
ALL
1
0
D
Q
OP
CODE
1
BUSY
READY
CHECK
STATUS
0
0
An
A0
Xn X0
ADDR
Figure7. ERASE, ERAL Sequences
(Q = 0) will be returned if S is driven high, and the
ST93C46will ignoreanydataon thebus.Whenthe
write cycle is completed, theReady signal (Q = 1)
will indicate (if S is driven high) that the ST93C46
is ready to receivea new instruction.
The Writeinstruction includesan automaticErase
cycle beforewriting the data, it is thereforeunnec-
essary to execute an Erase instruction before a
Write instruction execution.
EraseAll
The Erase All instruction (ERAL) erases the whole
memory (all memory bits are set to ”1”).A dummy
addressis input duringthe instructiontransfer and
the erase is made in the sameway as the ERASE
instructionabove.IftheST93C46 isstillperforming
the write cycle, the Busy signal (Q = 0) will be
returnedif S is driven high, and the ST93C46will
ignore any data on the bus. When the write cycle
is completed,the Readysignal (Q = 1)will indicate
(if S is driven high) that the ST93C46 is ready to
receive a new instruction.
Write All
For correct operation,an ERAL instructionshould
be executedbefore the WRALinstruction.
The Write All instruction (WRAL) writes the Data
Input byte or word to all the addresses of the
memory. In the WRAL instruction, NO automatic
erase is made so all bytes/words must be erased
beforetheWRALinstruction. IftheST93C46isstill
performing the write cycle, the Busy signal (Q = 0)
willbereturnedifSisdrivenhigh,and theST93C46
will ignore any data on the bus. When the write
cycle is completed, the Ready signal (Q = 1) will
indicate (if S is driven high) that the ST93C46 is
ready to receive a newinstruction.
Notes:
1. An: n = 5 for x16 org. and 6 for x8 org.
2. Xn: n = 3 for x16 org. and 4 for x8 org.
INSTRUCTIONS
(cont’d)
8/13
ST93C46A/46C/46T, ST93C47C/47T
相关PDF资料 |
PDF描述 |
|---|---|
| ST93C46TB3TR | 1K 64 x 16 or 128 x 8 SERIAL MICROWIRE EEPROM |
| ST93C46TB6013TR | 1K 64 x 16 or 128 x 8 SERIAL MICROWIRE EEPROM |
| ST93C46TB6TR | 1K 64 x 16 or 128 x 8 SERIAL MICROWIRE EEPROM |
| ST93C47AM1013TR | 1K 64 x 16 or 128 x 8 SERIAL MICROWIRE EEPROM |
| ST93C47AM1TR | 1K 64 x 16 or 128 x 8 SERIAL MICROWIRE EEPROM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ST93C46TB3TR | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:1K 64 x 16 or 128 x 8 SERIAL MICROWIRE EEPROM |
| ST93C46TB6 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Microwire Serial EEPROM |
| ST93C46TB6013TR | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:1K 64 x 16 or 128 x 8 SERIAL MICROWIRE EEPROM |
| ST93C46TB6TR | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:1K 64 x 16 or 128 x 8 SERIAL MICROWIRE EEPROM |
| ST93C46TM1 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Microwire Serial EEPROM |
发布紧急采购，3分钟左右您将得到回复。