参数资料
型号: STAC9759(3.3V)
元件分类: Codec
英文描述: STAC9758 (5V) and STAC9759 (3.3V) : Six Channel AC'97 2.3 Codecs C-Major? AC'97 Revision 2.3 Codecs (pdf. 185Kb. 071602) AC'97 rev 2.3 Audio Codecs with Internal Jack-Sense and Paging Registers.
中文描述: STAC9758(5V),采用STAC9759(3.3):2.3六声道AC\u0026#39;97解码器C大? AC\u0026#39;97音效解码器2.3版(pdf. 185Kb。071602)AC\u0026#39;97音效转速2.3音频编解码器,内部杰克意识和分页寄存器。
文件页数: 2/5页
文件大小: 80K
代理商: STAC9759(3.3V)
2
2-9766-P1-3.2-0802
STAC9766/67
Two Channel AC
97 Codecs with Headphone Drive and SPDIF Output
N O T R E C O M M E N D E D F O R N E W
D E S I G N S .
DESCRIPTION (CONTINUED)
The STAC9766/67 block diagram is illustrated on page 3. It provides variable sam-
ple rate Digital-to-Analog (DA) and Analog-to-Digital (AD) conversion, mixing, and
analog processing. Supported audio sample rates include 48 kHz, 44.1 kHz,
32 kHz, 22.05 kHz, 16 kHz, 11.025 kHz, and 8 kHz; additional rates are supported
in the STAC9766/67 soft audio drivers. The digital interface communicates with the
AC
97 controller via the five-wire AC-Link and contains the 64-word by 16-bit regis-
ters. The two DACs convert the digital stereo PCM-out content to audio. The MIXER
block combines the PCM_OUT with any analog sources, to drive the LINE_OUT
and HP_OUT outputs. The MONO_OUT delivers either mic only, or a mono mix of
sources from the MIXER. The stereo variable sample rate ADC
s provide record
capability for any mix of mono or stereo sources, and deliver a digital stereo PCM-in
signal back to the AC-Link. The microphone input and mono input can be recorded
simultaneously, thus allowing for an all digital output in support of the digital ready
initiative. All ADC
s operate at 18-bit resolution and DAC
s at 20-bit resolution. For a
digital ready record path, the microphone is connected to the left channel ADC while
the mono output of the stereo mixer is connected to right channel ADC. Make sure
the microphone input is not connected to the stereo mixer when in this mode.
The STAC9766/67 supports General Purpose Input/Output (GPIO), as well as
SPDIF output. These digital I/O options provide for a number of advance architec-
tural implementations, with volume controls and digital mixing capabilities built
directly into the codec.
The STAC9766/67 is designed primarily to support stereo (2-speaker) audio. True
AC-3 playback can be achieved for 6-speaker applications by taking advantage of
the multi-codec option available in the STAC9766/67 to support multiple codecs in
an AC'97 architecture. Additionally, the STAC9766/67 provides for a stereo
enhancement feature, SigmaTel Surround 3D (SS3D). SS3D provides the listener
with several options for improved speaker separation beyond the normal 2/4-
speaker arrangements.
Together with the logic component (controller or advanced core logic chip-set) of
AC'97, STAC9766/67 can be SoundBlaster
and Windows Sound System
compat-
ible with SigmaTel
s WDM driver for WIN 98/2K/ME/XP. SoundBlaster is a registered
trademark of Creative Labs. Windows is a registered trademark of Microsoft Corpo-
ration.
Copyright 2001 SigmaTel, Inc. All rights reserved.
All contents of this document are protected by copyright law and may not be reproduced without the express written consent of SigmaTel,
Inc.
SigmaTel, the SigmaTel logo, and combinations thereof are trademarks of SigmaTel, Inc. Other product names used in this publication
are for identification purposes only and may be trademarks or registered trademarks of their respective companies. The contents of this
document are provided in connection with SigmaTel, Inc. products. SigmaTel, Inc. has made best efforts to ensure that the information
contained herein is accurate and reliable. However, SigmaTel, Inc. makes no warranties, express or implied, as to the accuracy or com-
pleteness of the contents of this publication and is providing this publication "AS IS". SigmaTel, Inc. reserves the right to make changes
to specifications and product descriptions at any time without notice, and to discontinue or make changes to its products at any time without
notice. SigmaTel, Inc. does not assume any liability arising out of the application or use of any product or circuit, and specifically disclaims
any and all liability, including without limitation special, consequential, or incidential damages.
相关PDF资料
PDF描述
STAC9766 STAC9766/67: Stereo AC'97 Codec with Headphone Drive and SPDIF Output (FOR CODEC REVISION CA3 AND CB2 PARTS) NOT RECOMMENDED FOR NEW DESIGNS.FOR NEW DESIGNS. PLEASE SEE THE STAC9766/67-CC1 AND BEYOND. Product Brief (pdf. 81Kb. 2-9766-P1-3.2-0802)
STAC9766(5V) STAC9766 (5V) and STAC9767 (3.3V) : STAC9766/67 : Stereo AC'97 2.3 Upgrade Codec with Headphone Drive and SPDIF Output (FOR CODEC REVISION CC1 AND BEYOND. PRODUCT UPGRADE FROM CA3 & CB2) Appnote: Motherboard Implementation for AC'97 Codecs with Integrated Headphone Amplifiers (pdf. 34Kb. 2-AN011-1.0-0701)
STANDARD-CELL Microcontroller
STARCOM42026TOTEM MESSAGE DISPLAY 4/20
STARCOM81615 STARCOM81615 ((NS))
相关代理商/技术参数
参数描述
STAC9759XXTAEYYX 制造商:IDT 制造商全称:Integrated Device Technology 功能描述:HIGH-PERFORMANCE 6-CHANNEL AC’97 2.3 CODEC WITH UNIVERSAL JACKS
STAC9766 制造商:未知厂家 制造商全称:未知厂家 功能描述:STAC9766/67: Stereo AC'97 Codec with Headphone Drive and SPDIF Output (FOR CODEC REVISION CA3 AND CB2 PARTS) NOT RECOMMENDED FOR NEW DESIGNS.FOR NEW DESIGNS. PLEASE SEE THE STAC9766/67-CC1 AND BEYOND. Product Brief (pdf. 81Kb. 2-9766-P1-3.2-0802)
STAC9766(5V) 制造商:未知厂家 制造商全称:未知厂家 功能描述:STAC9766 (5V) and STAC9767 (3.3V) : STAC9766/67 : Stereo AC'97 2.3 Upgrade Codec with Headphone Drive and SPDIF Output (FOR CODEC REVISION CC1 AND BEYOND. PRODUCT UPGRADE FROM CA3 & CB2) Appnote: Motherboard Implementation for AC'97 Codecs with Integrated Headphone Amplifiers (pdf. 34Kb. 2-AN011-1.0-0701)
STAC9766T-CB2 制造商:Rochester Electronics LLC 功能描述:- Bulk
STAC9766XXTAEC1X 制造商:Integrated Device Technology Inc 功能描述: