参数资料
型号: STM1E-SFP-EVK
厂商: Maxim Integrated Products
文件页数: 5/16页
文件大小: 0K
描述: KIT EVALUATION STM1E-SFP
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 1
STM1E-SFPxx 155Mbps Copper Transceiver
Final Datasheet
Host Interface Pinout
Pin
1
2
3
Name
VeeT
Tx Fault
Tx Disable
Description
Transmitter ground.
Not supported in STM1E-SFPxx. Grounded internally.
Transmit Disable. When pin is high or open, the transmitter is powered
Notes
Note 1
down and tri-stated.
4
5
6
7
MOD-DEF2
MOD-DEF1
MOD-DEF0
Rate Select
Module Definition 2. Bi-directional data pin of two wire serial ID
interface. This pin is open-drain and may be wired-ORed with other
open-drain or open-collector devices.
Module Definition 1. Clock pin of two wire serial ID interface. Data is
clocked into EEPROM device on the positive edge and clocked out on
the negative edge.
Module Definition 0. Grounded internally. Used to notify host system
that an SFP is present.
Not supported in STM1E-SFPxx. Floating internally.
8
RLOS
Receive Loss of Signal. Asserted when the received signal is less than
Note 2
approximately 19dB below nominal for 110 UI. The RLOS condition is
cleared when the received signal is greater than approximately 18dB
below nominal for 110 UI.
9 VeeR Receiver ground. Note 1
10 VeeR Receiver ground. Note 1
11 VeeR Receiver ground. Note 1
12 RD-
13 RD+
Recovered receive NRZ data output (inverted).
Recovered receive NRZ data output.
14 VeeR Receiver ground. Note 1
15 VccR Receiver power supply (+3.3V). Note 3
16 VccT Transmitter power supply (+3.3V). Note 3
17 VeeT Transmitter ground. Note 1
18 TD+
19 TD-
Transmit NRZ data input.
Transmit NRZ data input (inverted).
20 VeeT Transmitter ground. Note 1
Notes:
1. Transmit and Receive grounds are connected directly together internally. For STM1E-SFP08 version,
circuit grounds are also connected to frame/chassis ground.
2. During Rx LOS conditions, the receive data outputs RD+/- are squelched. See Receiver Loss of Signal
Condition section for more information on LOS detection for STM-1e interfaces.
3. Transmit and Receive power supplies are connected together internally.
STM1E-SFPxx Datasheet
-5-
August 2008 v2-2
相关PDF资料
PDF描述
REC6-1212DRW/R8/A CONV DC/DC 6W 9-18VIN +/-12VOUT
M3BYK-2006J IDC CABLE - MSR20K/MC20G/MPD20K
M3DRK-2006J IDC CABLE - MKR20K/MC20G/MPR20K
CM453232-151JL INDUCTOR 150UH 105MA SMD
H3WWH-4018G IDC CABLE - HPL40H/AE40G/HPL40H
相关代理商/技术参数
参数描述
STM1E-SFPXX 功能描述:TXRX COPPER MSA SFP RoHS:是 类别:编程器,开发系统 >> 评估演示板和套件 系列:* 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:- 主要目的:电源管理,电池充电器 嵌入式:否 已用 IC / 零件:MAX8903A 主要属性:1 芯锂离子电池 次要属性:状态 LED 已供物品:板
STM1-FU 制造商:Thomas & Betts 功能描述:
STM1N100/220 制造商:未知厂家 制造商全称:未知厂家 功能描述:TRANSISTOR | MOSFET | N-CHANNEL | 1KV V(BR)DSS | 1A I(D) | TO-220AB
STM1N100/3 制造商:未知厂家 制造商全称:未知厂家 功能描述:TRANSISTOR | MOSFET | N-CHANNEL | 1KV V(BR)DSS | 1A I(D) | TO-3
STM1N45/220 制造商:未知厂家 制造商全称:未知厂家 功能描述:TRANSISTOR | MOSFET | N-CHANNEL | 450V V(BR)DSS | 1A I(D) | TO-220AB