参数资料
型号: STM8AF52A9TCX
厂商: STMICROELECTRONICS
元件分类: 微控制器/微处理器
英文描述: 8-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP64
封装: 10 X 10 MM, ROHS COMPLIANT, LQFP-64
文件页数: 11/120页
文件大小: 2236K
代理商: STM8AF52A9TCX
Known limitations
STM8AF52/62xx, STM8AF51/61xx
108/120
Doc ID 14395 Rev 7
13.3
USART Interface
13.3.1
Parity error flag (PE) not correctly set when overrun condition occurs
Description
If an overrun condition occurs, the parity error flag (PE) of the UART_SR register is not set
for the frame which caused the overrun condition. The PE flag represents the status of the
last correctly received frame.
Workaround
None.
13.4
LINUART interface
13.4.1
Framing error with data byte 0x00
Description
If the LINUART interface is configured in LIN slave mode, and the active mode with break
detection length is set to 11 (LBDL bit of UART_CR4 register set to 1), FE and RXNE flags
are not set when receiving a 0x00 data byte with a framing error, followed by a recessive
state. This occurs only if the dominant state length is between 9.56 and 10.56 times the
baud rate.
Workaround
The LIN software driver can handle this exceptional case by implementing frame timeouts to
comply with the LIN standard. This method has been implemented in ST LIN 2.1 driver
package which passed the LIN compliance tests.
13.4.2
Framing error when receiving an identifier (ID)
Description
If an ID framing error occurs when the LINUART is in active mode, both LHE and LHDF
flags are set at the end of the LIN header with ID framing error.
Workaround
The LIN software driver can handle this case by checking both LHE and LHDF flags upon
header reception.
13.4.3
Parity error when receiving an identifier (ID)
Description
If an ID parity error occurs, the LINUART wakes up from mute mode and both LHE and
LHDF are set at the end of the LIN header with parity error. The PE flag is also set.
相关PDF资料
PDF描述
STM8AF52A9TDX 8-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP64
STM8AF6178TAU 8-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP48
STM8AF6178TBX 8-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP48
STM8AF6178TDX 8-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP48
STM8AF6178TDY 8-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP48
相关代理商/技术参数
参数描述
STM8AF52A9TCY 功能描述:8位微控制器 -MCU Automotive 8-Bit MCU Rev U 96KBit 80-Pin RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
STM8AF52A9TDY 功能描述:8位微控制器 -MCU 8-Bit Automotive MCU CAN Line 128kb Flash RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
STM8AF52AA 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Automotive 8-bit MCU, with up to 128 Kbytes Flash, data EEPROM
STM8AF52AATAY 功能描述:8位微控制器 -MCU 8-Bit Automotive MCU CAN Line 128kb Flash RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
STM8AF52AATCX 制造商:STMicroelectronics 功能描述: