FEATURES
Charge Balancing ADC
24 Bits No Missing Codes
60.0015% Nonlinearity
Two-Channel Programmable Gain Front End
Gains from 1 to 128
Differential Inputs
Low-Pass Filter with Programmable Filter Cutoffs
Ability to Read/Write Calibration CoeffICients
Bidirectional Microcontroller Serial Interface
Internal/External Reference Option
Single or Dual Supply Operation
Low Power (25 mW typ) with Power-Down Mode
(7 mW typ)
APPLICATIONS
Weigh Scales
Thermocouples
Process Control
Smart Transmitters
Chromatography
GENERAL DESCRIPTION
The AD7710 is a complete analog front end for low frequency
measurement applications. The device accepts low level signals
directly from a strain gage or transducer and outputs a serial
digital word. It employs a sigma-delta conversion technique to
realize up to 24 bits of no missing codes performance. The input
signal is applied to a proprietary programmable gain front end
based around an analog modulator. The modulator output is
processed by an on-chip digital filter. The first notch of this
digital filter can be programmed via the on-chip control register
allowing adjustment of the filter cutoff and settling time.
The part features two differential analog inputs and a differential reference input. Normally, one of the channels will be used
as the main channel with the second channel used as an auxiliary input to periodically measure a second voltage. It can be
operated from a single supply (by tying the VSS pin to AGND)
provided that the input signals on the analog inputs are more
positive than –30 mV. By taking the VSS pin negative, the part
can convert signals down to –VREF on its inputs. The AD7710
thus performs all signal conditioning and conversion for a single
or dual channel system.
The AD7710 is ideal for uuse in smart, microcontroller based
systems. Input channel selection, gain settings and signal polarity can be configured in software using the bidirectional serial
port. The AD7710 contains self-calibration, system calibration
and background calibration options and also allows the user to
read and write the on-chip calibration registers.
CMOS construction ensures low power dissipation and a software programmable power down mode reduces the standby
power consumption to only 7 mW typical. The part is available
in a 24-lead, 0.3 inch-wide, plastic and hermetic dual-in-line
package (DIP) as well as a 24-lead small outline (SOIC)
package.
PRODUCT HIGHLIGHTS
1. The programmable gain front end allows the AD7710 to
accept input signals directly from a strain gage or transducer,
removing a considerable amount of signal conditioning.
2. The AD7710 is ideal for microcontroller or DSP processor
applications with an on-chip control register which allows
control over filter cutoff, input gain, channel selection, signal
polarity and calibration modes.
3. The AD7710 allows the user to read and write the on-chip
calibration registers. This means that the microcontroller has
much greater control over the calibration procedure.
4. No missing codes ensures true, usable, 23-bit dynamic range
coupLED with excellent ±0.0015% accuracy. The effects of
temperature drift are eliminated by on-chip self-calibration,
which removes zero-scale and full-scale errors.
专业代理，全新到货，大量现货欢迎询问！！！
质优价廉，品质保证！
批号：13+14+
专业代理全线产品，优势的进货渠道，专业的销售团队，一手货源，全国最低价供应！
为您提供专业、快捷、可靠的产品
深圳斯普仑科技有限公司
Shenzhen Spring Technology Co.,Ltd
地址：深圳市福田区振华路122号海外装饰大厦A座211室
Shenzhen futian district zhenhua road 122 overseas decoration building, room 211, BLOCK A, 518031
成先生
电话（Tel）：(+86-755) 8352 1389/ 8350 5153
传真（Fax）：(+86-755) 8350 2530
邮箱: szspl5@szspl-ic.com
网址：www.szspl-ic.com/ www.splkj.com/