3 Volt GaAs SPDT Switch, DC - 2.0 GHz
SW-395
SW-395
M/A-COM Division of AMP Incorporated
Q
North America: Tel. (800) 366-2266, Fax (800) 618-8883
Q
Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087
Q
Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
V2.00
Features
Low Insertion Loss: <0.7 dB @ 900 MHz
Low Power Consumption: <10
μ
A @ =3 VDC
Very High Intercept Point: 52 dBm IP
3
Both Positive and Negative 3 to 8 V Control
Low Cost SOT-26 Package
SOT-26
1
Electrical Specifications: T
A
= +25°C
Parameter
Insertion Loss
1
3 Volt GaAs SPDT Switch
DC - 2.0 GHz
Test Conditions
Units
dB
dB
dB
dB
Min.
Typ.
0.7
0.8
25
19
1.3:1
27
28
16
18
7
8
38
61
71
48
52
Max.
0.9
1.0
DC - 1.0 GHz
1.0 - 2.0 GHz
DC - 1.0 GHz
1.0 - 2.0 GHz
DC - 2.0 GHz
Input Power (3V Control) 0.5 GHz
Input Power (5V Control) 0.5 GHz
Input Power (3V Control) 0.05 GHz
Input Power (5V Control) 0.05 GHz
10% to 90% RF, 90% to 10% RF
50% Control to 90% RF, Control to 10% RF
In-band
2-Tone, 5 MHz spacing, 3 V Control 0.05 GHz
+10 dBm each 0.5 GHz
2-Tone, 5 MHz spacing, 3 V Control 0.05 GHz
+10 dBm each 0.5 GHz
Isolation
23
17
VSWR
1 dB Compression
dBm
dBm
dBm
dBm
μ
S
μ
S
mV
dBm
dBm
dBm
dBm
T
rise
,
T
fall
T
on
,
T
off
T
ransients
Input IP
2
Input IP
3
Description
M/A-COM’s SW-395 is a GaAs monolithic switch in a low cost
SOT-26 surface mount plastic package. The SW-395 is ideally
suited for applications where very low power consumption, low
intermodulation products, very small size and low cost are
required. Typical application is an internal/external antenna
select switch for portable telephones and data radios. In addi-
tion, because of its low loss, good isolation and inherent speed,
the SW-395 can be used as a conventional T/R switch or as an
antenna diversity switch. The SW-395 can be used in power
applications up to 0.5 Watts in systems such as cellular, PCN,
GSM an other analog/digital wireless communications systems.
The SW-395 is fabricated using a mature 1-micron gate length
GaAs MESFET process. The process features full chip passiva-
tion for increased performance and reliability.
Ordering Information
Part Number
SW-395 PIN
SW-395TR
Package
SOT-26 Plastic Package
Forward Tape and Reel
1
1. Refer to Application Note M513 for reel size information.
1.
All measurements at 1 GHz in a 50
system with a 3V control unless otherwise specified. Loss varies at 0.003 dB/°C.
PIN 1
XX#Y
1. Dimensions are in: inches/mm