参数资料
| 型号： | SY100E111AJY |
| 厂商： | Micrel Inc |
| 文件页数： | 1/6页 |
| 文件大小： | 0K |
| 描述： | IC CLK FANOUT BUFFER 1:9 28-PLCC |
| 标准包装： | 38 |
| 系列： | 100E, Precision Edge® |
| 类型： | 扇出缓冲器（分配） |
| 电路数： | 1 |
| 比率 - 输入:输出： | 1:9 |
| 差分 - 输入:输出： | 是/是 |
| 输入： | PECL |
| 输出： | PECL |
| 电源电压： | 4.2 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 28-LCC（J 形引线） |
| 供应商设备封装： | 28-PLCC |
| 包装： | 管件 |
| 产品目录页面： | 1087 (CN2011-ZH PDF) |
| 其它名称： | 576-1967-5 SY100E111AJY-ND |
1
Precison Edge
SY10E111A/L
SY100E111A/L
Micrel, Inc.
M9999-032006
hbwhelp@micrel.com or (408) 955-1690
DESCRIPTION
FEATURES
Precision Edge
SY10E111A/L
SY100E111A/L
5V/3.3V 1:9 DIFFERENTIAL
CLOCK DRIVER (w/o ENABLE)
s 5V and 3.3V power supply options
s 200ps part-to-part skew
s 50ps output-to-output skew
s Differential design
s VBB output
s Voltage and temperature compensated outputs
s 75K
input pulldown resistors
s Fully compatible with Motorola MC100LVE111
s Available in 28-pin PLCC package
The SY10/100E111A/L are low skew 1-to-9 differential
driver designed for clock distribution in mind.
The
SY10/100E111A/L's function and performance are similar to
the popular SY10/100E111, with the improvement of lower
jitter and the added feature of low voltage operation. It accepts
one signal input, which can be either differential or single-
ended if the V
BB output is used. The signal is fanned out to 9
identical differential outputs.
The E111A/L are specifically designed, modeled and
produced with low skew as the key goal. Optimal design and
layout serve to minimize gate to gate skew within a device, and
empirical modeling is used to determine process control limits
that ensure consistent t
pd distributions from lot to lot. The net
result is a dependable, guaranteed low skew device.
To ensure that the tight skew specification is met it is
necessary that both sides of the differential output are
terminated into 50
, even if only one side is being used. In
most applications, all nine differential pairs will be used and
therefore terminated. In the case where fewer that nine pairs
are used, it is necessary to terminate at least the output pairs
on the same package side as the pair(s) being used on that
side, in order to maintain minimum skew. Failure to do this will
result in small degradations of propagation delay (on the order
of 10-20ps) of the output(s) being used which, while not being
catastrophic to most designs, will mean a loss of skew margin.
The E111A/L, as with most other ECL devices, can be
operated from a positive V
CC supply in PECL mode.
This
allows the E111A/L to be used for high performance clock
distribution in +5V/+3.3V systems. Designers can take
advantage of the E111A/L's performance to distribute low
skew clocks across the backplane or the board. In a PECL
environment, series or Thevenin line terminations are typically
used as they require no additional power supplies.
For
systems incorporating GTL, parallel termination offers the
lowest power by taking advantage of the 1.2V supply as
terminating voltage.
BLOCK DIAGRAM
IN
VBB
Q0
Q1
Q2
Q3
Q4
Q5
Q6
Q7
Q8
IN
Rev.: J
Amendment: /0
Rev. Date:
March 2006
Precision Edge is a registered trademark of Micrel, Inc.
Precision Edge
PIN NAMES
Pin
Function
IN, IN
Differential Input Pair
Q0, Q0 — Q8, Q8
Differential Outputs
VBB
VBB Output
VCCO
VCC to Output
相关PDF资料 |
PDF描述 |
|---|---|
| SY100EP11UZG | IC CLOCK BUFFER 1:2 3GHZ 8-SOIC |
| SY10EL15ZG | IC CLOCK BUFFER MUX 2:4 16-SOIC |
| SY100EL11VZG | IC CLOCK FANOUT BUFFER 1:2 8SOIC |
| MAX9311ECJ+ | IC CLK/DATA BUFF MUX 2:10 32LQFP |
| ADCLK907BCPZ-R7 | IC CLK/DATA BUFF DVR 1:1 16LFCSP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SY100E111AJY TR | 功能描述:缓冲器和线路驱动器 5V 1:9 Differential Clock Driver (without Enable) (I Temp, Lead Free) RoHS:否 制造商:Micrel 输入线路数量:1 输出线路数量:2 极性:Non-Inverting 电源电压-最大:+/- 5.5 V 电源电压-最小:+/- 2.37 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Reel |
| SY100E111AJYTR | 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:5V/3.3V 1:9 DIFFERENTIAL CLOCK DRIVER (w/o ENABLE) |
| SY100E111JC | 功能描述:IC CLK FANOUT BUFFER 1:9 28-PLCC RoHS:否 类别:集成电路 (IC) >> 时钟/计时 - 时钟缓冲器，驱动器 系列:100E, ECLinPS™ 标准包装:1 系列:HiPerClockS™ 类型:扇出缓冲器（分配），多路复用器 电路数:1 比率 - 输入:输出:2:18 差分 - 输入:输出:是/无 输入:CML，LVCMOS，LVPECL，LVTTL，SSTL 输出:LVCMOS，LVTTL 频率 - 最大:250MHz 电源电压:2.375 V ~ 3.465 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:32-LQFP 供应商设备封装:32-TQFP（7x7） 包装:- 其它名称:800-1923-6 |
| SY100E111JC TR | 功能描述:IC CLK FANOUT BUFFER 1:9 28-PLCC RoHS:否 类别:集成电路 (IC) >> 时钟/计时 - 时钟缓冲器，驱动器 系列:100E, ECLinPS™ 标准包装:1 系列:HiPerClockS™ 类型:扇出缓冲器（分配），多路复用器 电路数:1 比率 - 输入:输出:2:18 差分 - 输入:输出:是/无 输入:CML，LVCMOS，LVPECL，LVTTL，SSTL 输出:LVCMOS，LVTTL 频率 - 最大:250MHz 电源电压:2.375 V ~ 3.465 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:32-LQFP 供应商设备封装:32-TQFP（7x7） 包装:- 其它名称:800-1923-6 |
| SY100E111JCTR | 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:1:9 DIFFERENTIAL CLOCK DRIVER WITH ENABLE |
发布紧急采购，3分钟左右您将得到回复。