参数资料
| 型号： | SY88149CLKG |
| 厂商： | Micrel Inc |
| 文件页数： | 1/10页 |
| 文件大小： | 0K |
| 描述： | IC AMP LIMITING PECL TTL 10-MSOP |
| 标准包装： | 100 |
| 类型： | 限幅后置放大器 |
| 应用： | 光纤学网络 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-TFSOP，10-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 10-MSOP |
| 包装： | 管件 |
| 产品目录页面： | 1089 (CN2011-ZH PDF) |
| 其它名称： | 576-3393-5 |
SY88149CL
3.3V, 1.25Gbps PECL Limiting Post
Amplifier w/High Gain TTL Signal Detect
January 2009
1
M9999-011609-C
hbwhelp@micrel.com or (408) 955-1690
General Description
The SY88149CL is a high-sensitivity limiting post
amplifier designed for use in fiber-optic receivers. These
devices connect to typical transimpedance amplifiers
(TIAs). The linear signal output from TIAs can contain
significant amounts of noise and may vary in amplitude
over time. The SY88149CL quantizes these signals and
outputs PECL level waveforms.
The SY88149CL operates from a single +3.3V power
supply, over temperatures ranging from –40
oC to +85oC.
With its wide bandwidth and high gain, signals with data
rates up to 1.25Gbps, and as small as 5mVpp, can be
amplified to drive devices with PECL inputs.
The SY88149CL generates a high-gain signal-detect
(SD) open-collector TTL output. The SD function has a
high gain input stage for increased sensitivity. A
programmable Signal Detect level set pin (SDLVL) sets
the sensitivity of the input amplitude detection. SD
asserts high if the input amplitude rises above the
threshold set by SDLVL and de-asserts low otherwise.
The enable input (EN) de-asserts the true output signal
without removing the input signal. The SD output can be
fed back to the EN input to maintain output stability
under a loss-of-signal condition. Typically, 3.4dB SD
hysteresis is provided to prevent chattering.
All support documentation can be found on Micrel’s web
site at: www.micrel.com.
Features
∑ Single 3.3V power supply
∑ Fast SD enable/disable time
∑ 622Mbps to 1.25Gbps operation
∑ Low-noise PECL data outputs
∑ High-gain SD
∑ Chatter-free Open-Collector TTL signal detect (SD)
output with internal 4.75k pull-up resistor
∑ TTL EN input
∑ Programmable SD level set (SDLVL)
∑ Available in a tiny 10-pin MSOP package
Applications
∑ GE-PON/GPON/EPON
∑ Gigabit Ethernet
∑ 1062Mbps Fibre Channel
∑ OC-12/24 SONET/SDH
∑ High-gain line driver and line receiver
∑ Low-gain TIA interface
Markets
∑ FTTH/FTTP
∑ Datacom/Telecom
∑ Optical transceiver
相关PDF资料 |
PDF描述 |
|---|---|
| SY88149HALMG TR | IC AMP LIMITING 1.25GBPS 16QFN |
| SY88149HLMG TR | IC POST AMP BURST GEPON/GPON 16M |
| SY88149NDLMG | IC LIMITING AMP 1.25GBPS 16QFN |
| SY88289ALMG | IC POST AMP 3.3V 3.2GBPS 16-MLF |
| SY88289CLMG | IC POST AMP 3.3V 3.2GBPS 16-MLF |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SY88149CLKG TR | 功能描述:限幅放大器 3.3V, 1.25 Gbps LVPECL Post Amplifier with SD (I Temp, Green/4x SD gain/1xTC/10 MSOP) RoHS:否 制造商:Micrel 输入电压范围（最大值）:3.6 V 工作电源电压:3.3 V 电源电流:40 mA 工作温度范围:- 40 C to + 85 C 封装 / 箱体:MSOP-10 封装:Tube |
| SY88149CLKGTR | 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:3.3V, 1.25Gbps PECL Limiting Post |
| SY88149CLKG-TR | 功能描述:Limiting Postamplifier IC Optical Networks 10-MSOP 制造商:microchip technology 系列:- 包装:剪切带（CT） 零件状态:停产 类型:限幅后置放大器 应用:光纤学网络 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽） 供应商器件封装:10-MSOP 标准包装:1 |
| SY88149HAL | 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:1.25Gbps Burst-Mode Limiting Amplifier with Ultra-Fast Signal Assert Timing |
| SY88149HALMG | 功能描述:限幅放大器 1.25Gbps GPON Burst Mode Limiting Amplifier RoHS:否 制造商:Micrel 输入电压范围（最大值）:3.6 V 工作电源电压:3.3 V 电源电流:40 mA 工作温度范围:- 40 C to + 85 C 封装 / 箱体:MSOP-10 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。