参数资料
| 型号： | SY88923AVKC |
| 厂商： | Micrel Inc |
| 文件页数： | 1/8页 |
| 文件大小： | 0K |
| 描述： | IC AMP POST 5V/3.3V 10-MSOP |
| 标准包装： | 100 |
| 类型： | 限幅后置放大器 |
| 应用： | 光纤学网络 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-TFSOP，10-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 10-MSOP |
| 包装： | 管件 |
1
SY88923AV
Micrel, Inc.
M9999-110905
hbwhelp@micrel.com or (408) 955-1690
DESCRIPTION
s Single 3.3V or 5V power supply
s Up to 3.2Gbps operation
s Low noise PECL data outputs
s Chatter-free open collector TTL LOS output
s TTL /EN Input
s Differential PECL inputs for data
s Available in a tiny 10-pin (3mm) MSOP and 10-pin
(3mm) EPAD-MSOP
The SY88923AV limiting post amplifier with its high
gain and wide bandwidth is ideal for use as a post
amplifier in fiber-optic receivers with data rates up to
3.2Gbps. Signals as small as 5mV
PP can be amplified
to drive devices with PECL inputs. The SY88923AV
generates a chatter-free Loss-of-Signal (LOS) open
collector TTL output.
The SY88923AV incorporates a programmable level
detect function to identify when the input signal has been
lost. The LOS output will change from logic “LOW” to logic
“HIGH” when input signal is smaller than the swing set by
LOSLVL. This information can be fed back to the EN input
of the device to maintain stability under loss-of-signal
condition. Using LOSLVL pin, the sensitivity of the level
detection can be adjusted. The LOSLVL voltage can be set
by connecting a resistor divider between VCC and VREF
shown in Figure 3. “Typical Operating Characteristics” on
page 6 show the relationship between input level sensitivity
and the voltage set on LOSLVL.
The LOS output is a TTL open collector output that
requires a pull-up resistor for proper operation, Figure 1.
SY88923AV
LOS
4.7k
to 10k
VCC
Figure 1. LOS Output with Desired Rise Time
FEATURES
5V/3.3V 3.2Gbps HIGH-SPEED
LIMITING POST AMPLIFIER
SY88923AV
APPLICATIONS
s 1.25Gbps and 2.5Gbps Gigabit Ethernet
s 531Mbps, 1062Mbps and 2.12Gbps Fibre Channel
s 622Mbps SONET
s Gigabit interface converter
s 2.5Gbps SDH/SONET
s 2.5Gbps proprietary links
s Parallel 10G Ethernet
BLOCK DIAGRAM
Limiting
Amplifer
ECL
Buffer
GND
Enable
Level
Detect
/EN
LOS
DIN
/DIN
VREF
VCC
LOSLVL
DOUT
/DOUT
Rev.: F
Amendment: /0
Issue Date:
November 2005
相关PDF资料 |
PDF描述 |
|---|---|
| VE-25N-IV-F1 | CONVERTER MOD DC/DC 18.5V 150W |
| SY88913KC TR | IC AMP LIMITING POST HS 10-MSOP |
| VE-25M-IV-F2 | CONVERTER MOD DC/DC 10V 150W |
| VE-B3D-MY-B1 | CONVERTER MOD DC/DC 85V 50W |
| SY88973VKI TR | IC AMP POST 5V/3.3V HS 10-MSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SY88923AVKC TR | 功能描述:IC AMP POST 5V/3.3V 10-MSOP RoHS:否 类别:集成电路 (IC) >> 线性 - 放大器 - 专用 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:60 系列:- 类型:可变增益放大器 应用:CATV 安装类型:表面贴装 封装/外壳:20-WQFN 裸露焊盘 供应商设备封装:20-TQFN-EP（5x5） 包装:托盘 |
| SY88923AVKCTR | 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:5V/3.3V 3.2Gbps HIGH-SPEED LIMITING POST AMPLIFIER |
| SY88923AVKEC | 功能描述:IC AMP POST 5V/3.3V 10-MSOP RoHS:否 类别:集成电路 (IC) >> 线性 - 放大器 - 专用 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:60 系列:- 类型:可变增益放大器 应用:CATV 安装类型:表面贴装 封装/外壳:20-WQFN 裸露焊盘 供应商设备封装:20-TQFN-EP（5x5） 包装:托盘 |
| SY88923AVKEC TR | 功能描述:IC AMP POST 5V/3.3V 10-MSOP RoHS:否 类别:集成电路 (IC) >> 线性 - 放大器 - 专用 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:60 系列:- 类型:可变增益放大器 应用:CATV 安装类型:表面贴装 封装/外壳:20-WQFN 裸露焊盘 供应商设备封装:20-TQFN-EP（5x5） 包装:托盘 |
| SY88923AVKG | 功能描述:限幅放大器 3.3V-5V 3.2Gbps PECL Post Amp: 1xLOS gain/1xTC /16 MLF (I Temp, Green) RoHS:否 制造商:Micrel 输入电压范围（最大值）:3.6 V 工作电源电压:3.3 V 电源电流:40 mA 工作温度范围:- 40 C to + 85 C 封装 / 箱体:MSOP-10 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。