参数资料
型号: T 3402 000
厂商: Amphenol-Tuchel Electronics
文件页数: 47/52页
文件大小: 0K
描述: CONN CIR RCPT MALE 6POS PNL MNT
产品变化通告: C091A,B Series Design Change 19/Jan/2009
产品目录绘图: T3 Series Panel Male
标准包装: 50
系列: C 091 A
连接器类型: 插座,公形引脚
位置数: 6
外壳尺寸 - 插件: DIN(240 度)
安装类型: 面板安装,隔墙式(前端螺母)
端子: 焊接
紧固型: 有螺纹
方向: 带标记
防护等级: IP40
外壳材料,表面处理: 铸件,镀镍
触点表面涂层:
包装: 散装
额定电流: 5A
电压 - 额定: 300V
工作温度: -40°C ~ 100°C
产品目录页面: 397 (CN2011-ZH PDF)
配套产品: 361-1057-ND - CONN CIR FEMALE 6POS CBL MNT
其它名称: 361-1075
T 3402 000 U
T3402 000
C 091
IP Codes
(Ingress Protection)
Degree of protection
Electrical devices to which connectors belong have to be protected for safety reasons from outside influences like dust, foreign objects, direct contact, moisture
and water. This protection is provided on industrial connectors by their housings with their latching devices and sealed cable entries.
The degree of protection can be selected depending on the type of intended use. The standard IEC 60529 and/or DIN EN 60529 has specified the degree of
protection and divided into several classes.
The degree of protection is indicated in the following way:
Code letters
(Ingress Protection)
IP 65
2nd charact. Brief description
numeral
Definition
1st charact. numeral (degree of protection against access
to hazardous parts and against solid foreign objects)
2nd charact. numeral (degree of protection against ingress of water)
The following charts give an overview about all protection degrees.
0
1
2
Non-protected
Protected against vertically
falling water drops
Protected against vertically
falling water drops when
enclosure tilted up to 15°
Vertically falling drops shall
have no harmful effects.
Vertically falling drops shall
have no harmful effects when
the enclosure is tilted at any
angle up to 15° on either side
1st charact. Brief description
numeral
Non-protected
0
Protected against access to
1
hazardous parts with the
back of a hand. Protected
against solid foreign objects
of ≥ 50mm ? .
Protected against access to
2
hazardous parts with a
finger.
Protected against solid
foreign objects of
≥ 12.5mm ? .
3
Protected against access
to hazardous parts with a
tool. Protected against solid
foreign objects of ≥ 2.5mm
? .
Protected against access to
4
hazardous parts with a
wire.Protected against solid
foreign objects of ≥ 1mm ? .
Definition
The probe, sphere of 50mm
? , shall not fully penetrate
and shall have adequate
clearance from hazardous
parts.
The jointed test finger of
12mm ? , 80mm length,
shall have adequate clearance
from hazardous parts. The
probe, sphere of 12.5mm ? ,
shall not fully penetrate.
The probe of 2.5mm ? shall
not penetrate at all.
The probe of 1mm ? shall
not penetrate at all.
3
4
5
6
7
8
Protected against spraying
water
Protected against splashing
water
Protected against water jets
Protected against powerful
water jets
Protected against the effects
of temporary immersion in
water
Protected against the effects
of continous immersion in
of the vertical.
Water sprayed at an angle up
to 60° on either side of the
vertical shall have no harmful
effects.
Water splashed against the
enclosure from any direction
shall have no harmful effects.
Water projected in jets against
the enclosure from any
direction shall have no harmful
effects.
Water projected in powerful
jets against the enclosure
from any direction shall have
no harmful effects.
Intrusion of water in quantities
causing harmful effects shall
not be possible when the
enclosure is temporally
immersed in water for 30 min.
in 1m depth.
Intrusion of water in quantities
causing harmful effects shall
5
Protected against access to
The probe of 1mm ? shall
water
not be possible when the
hazardous parts with a wire. not penetrate.
enclosure is continuously
Dust-protected.
Intrusion of dust is not
totally prevented, but dust
shall not penetrate in a
quantity to interfere with
satisfactory operation of
immersed in water under
conditions which shall be
agreed between manufacturer
and user but which are more
severe than for numeral 7.
the device or to impair
safety.
9 K 1)
Protected against water
during high pressure/steam
Water projected in powerful
jets with high pressure against
6
Protected against access to
The probe of 1mm ? shall
jet cleaning
the enclosure from any
hazardous parts with a wire. not penetrate.
direction shall have no harmful
Amphenol
Dust-tight.
No intrussion of dust.
effects.
1) Remark: Numeral acc. to DIN 40050 part 9, vehicles IP code
47
相关PDF资料
PDF描述
VE-B54-MX-F2 CONVERTER MOD DC/DC 48V 75W
16982-6PG-522 CONN PLUG 6POS CABLE PIN
VE-B54-MX-F1 CONVERTER MOD DC/DC 48V 75W
VE-B54-MW CONVERTER MOD DC/DC 48V 100W
8282-5PG-3DC CONN RCPT 5POS CABLE PIN
相关代理商/技术参数
参数描述
T3402000RS 制造商:Amphenol Corporation 功能描述:C091A front mount 6 way male
T3402-009 制造商:Amphenol Tuchel 功能描述:connector,circular din,male panel recept,front mt,6din silver-pltd solder cont
T3-4020-10P 功能描述:环形MIL规格触点 RoHS:否 制造商:Amphenol Aerospace MIL 类型:MIL-DTL-38999 II 系列:LJT 触点类型: 触点类型2: 触点材料: 触点电镀:Nickel 电流额定值:
T3-4020-10R 制造商:Amphenol Corporation 功能描述:PIN CONTAC - Bulk
T3-4020-10RD 功能描述:环形MIL规格触点 RoHS:否 制造商:Amphenol Aerospace MIL 类型:MIL-DTL-38999 II 系列:LJT 触点类型: 触点类型2: 触点材料: 触点电镀:Nickel 电流额定值: