参数资料
型号: T491A224K035AT
厂商: Kemet
文件页数: 18/24页
文件大小: 0K
描述: CAP TANT 0.22UF 35V 10% 1206
产品培训模块: Capacitor Basics- Typical Uses for Capacitors
标准包装: 1
系列: T491
电容: 0.22µF
电压 - 额定: 35V
容差: ±10%
ESR(等效串联电阻): 18 欧姆
类型: 模制
工作温度: -55°C ~ 125°C
安装类型: 表面贴装
封装/外壳: 1206(3216 公制)
尺寸/尺寸: 0.126" L x 0.063" W(3.20mm x 1.60mm)
高度 - 座高(最大): 0.071"(1.80mm)
制造商尺寸代码: A
特点: 通用
包装: 标准包装
其它名称: 399-8273-6
Tantalum Surface Mount Capacitors – Standard Tantalum
T491 Industrial Grade MnO 2 Series
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
T
T 2
?Do
P 2
Po
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
E 1
Ao
F
B 1
Ko
Bo
E 2
W
S 1
P 1
T 1
?D 1
User Direction of Unreeling
Center Lines of Cavity
Cover Tape
B 1 is for tape feeder reference only,
including draft concentric about B o .
Embossment
For cavity size,
see Note 1 Table 4
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
8 mm
12 mm
16 mm
D 0
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
D 1 Minimum
Note 1
1.0
(0.039)
1.5
(0.059)
E 1
1.75 ±0.10
(0.069 ±0.004)
P 0
4.0 ±0.10
(0.157 ±0.004)
P 2
2.0 ±0.05
(0.079 ±0.002)
R Reference
Note 2
25.0
(0.984)
30
(1.181)
S 1 Minimum
Note 3
0.600
(0.024)
T Maximum T 1 Maximum
0.600 0.100
(0.024) (0.004)
Tape Size
8 mm
12 mm
16 mm
Pitch
Single (4 mm)
Single (4 mm) &
Double (8 mm)
Triple (12 mm)
B 1 Maximum
Note 4
4.35
(0.171)
8.2
(0.323)
12.1
(0.476)
Variable Dimensions — Millimeters (Inches)
E 2 Minimum F P 1 T 2 Maximum
6.25 3.5 ±0.05 4.0 ±0.10 2.5
(0.246) (0.138 ±0.002) (0.157 ±0.004) (0.098)
10.25 5.5 ±0.05 8.0 ±0.10 4.6
(0.404) (0.217 ±0.002) (0.315 ±0.004) (0.181)
14.25 5.5 ±0.05 8.0 ±0.10 4.6
(0.561) (0.217 ±0.002) (0.315 ±0.004) (0.181)
W Maximum
8.3
(0.327)
12.3
(0.484)
16.3
(0.642)
A 0 , B 0 & K 0
Note 5
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 5).
3. If S 1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B 1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defi ned by A 0 , B 0 and K 0 shall surround the component with suffi cient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
? KEMET Electronics Corporation ? P.O. Box 5928 ? Greenville, SC 29606 (864) 963-6300 ? www.kemet.com
T2005_T491 ? 10/8/2013
18
相关PDF资料
PDF描述
3386J-1-203 TRIMMER 20K OHM 0.5W TH
3386J-1-202 TRIMMER 2K OHM 0.5W TH
3386J-1-201 TRIMMER 200 OHM 0.5W TH
3386J-1-105 TRIMMER 1M OHM 0.5W TH
3386J-1-104 TRIMMER 100K OHM 0.5W TH
相关代理商/技术参数
参数描述
T491A224K035AT 制造商:KEMET Corporation 功能描述:CAPACITOR TANT, 0.22UF 35V 18 OHM 10%, 3216-18
T491A224K035AT 制造商:KEMET Corporation 功能描述:CAP, TANTALUM, 220NF, 35V, A
T491A224K035AT2478 制造商:KEMET Corporation 功能描述:.220UF 35.0V 制造商:KEMET Corporation 功能描述:.220UF 35.0V - Tape and Reel
T491A224K035AT4394 制造商:KEMET Corporation 功能描述:.220UF 35.0V - Boxed Product (Development Kits)
T491A224K035AT4539 制造商:KEMET Corporation 功能描述:.220UF 35.0V - Tape and Reel