- 您现在的位置：买卖IC网 > PDF目录17723 > T4K212BJ104MD-T (Taiyo Yuden)CAP ARRAY 4CH 0.1UF 25V 0805 PDF资料下载
参数资料
| 型号： | T4K212BJ104MD-T |
| 厂商： | Taiyo Yuden |
| 文件页数： | 12/16页 |
| 文件大小： | 0K |
| 描述： | CAP ARRAY 4CH 0.1UF 25V 0805 |
| 产品变化通告： | X5R, X7R Part Number Change |
| 标准包装： | 4,000 |
| 电容： | 0.1µF |
| 电压 - 额定： | 25V |
| 电介质材料： | 陶瓷 |
| 电容器数量： | 4 |
| 电路类型： | 隔离 |
| 温度系数： | X5R |
| 容差： | ±20% |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 0805（2012 公制） |
| 尺寸/尺寸： | 0.079" L x 0.049" W（2.00mm x 1.25mm） |
| 高度 - 座高（最大）： | 0.033"（0.85mm） |
| 包装： | 带卷 (TR) |
■ RELIABILITY DATA
16. Humidity Loading
Temperature Compensating
（ Class 1 ）
Speci?ed
Value
Standard
High Frequency Type
Appearance: No abnormality
Capacitance change: Within ± 7.5% or ± 0.75pF, whichever is larger.
Q ： C ＜ 30pF ： Q ≧ 100 ＋ 10C/3
C ≧ 30pF ： Q ≧ 200 （ C ： Nominal capacitance ）
Insulation resistance: 500 M Ω min.
Appearance: No abnormality
Capacitance change: C ≦ 2pF ： Within ± 0.4 pF
C ＞ 2pF ： Within ± 0.75 pF （ C ： Nominal capacitance ）
Insulation resistance: 500 M Ω min.
High Permittivity （ Class 2 ） Note 1
【 Test Methods and Remarks 】
Class 1
Appearance: No abnormality
Capacitance change: Within ± 12.5% （ BJ, B7, C6, C7 ）
Within ± 30% （ F ）
Dissipation factor ： 5.0% max. （ BJ, B7, C6, C7 ）
11.0% max. （ F ）
Insulation resistance: 25 M Ωμ F or 500 M Ω , whichever is smaller.
Class 2
Standard
High Frequency Type
All items
Preconditioning
Temperature
Humidity
Duration
Applied voltage
40 ± 2 ℃
None
60 ± 2 ℃
90 to 95 ％ RH
500 ＋ 24/ ー 0 hrs
Rated voltage
Preconditioning
Temperature
Humidity
Duration
Voltage treatment
（ Rated voltage are applied for 1 hour at 40 ℃） Note 3
40 ± 2 ℃
90 to 95 ％ RH
500 ＋ 24/ ー 0 hrs
Charge/discharge current
Recovery
50mA max.
6 to 24 hrs （ Standard condition ） Note 5
Applied voltage
Charge/discharge current
Recovery
Rated voltage
50mA max.
24 ± 2 hrs （ Standard condition ） Note 5
17. High Temperature Loading
Temperature Compensating
（ Class 1 ）
Speci?ed
Value
Standard
High Frequency Type
Appearance: No abnormality
Capacitance change: Within ± 3% or ± 0.3pF, whichever is larger.
Q ： C ＜ 10pF ： Q ≧ 200 ＋ 10C
10 ≦ C ＜ 30pF ： Q ≧ 275 ＋ 2.5C
C ≧ 30pF ： Q ≧ 350 （ C ： Nominal capacitance ）
Insulation resistance: 1000 M Ω min.
Appearance: No abnormality
Capacitance change: Within ± 3% or ± 0.3pF, whichever is larger.
Insulation resistance: 1000 M Ω min.
High Permittivity （ Class 2 ） Note 1
【 Test Methods and Remarks 】
Class 1
Appearance: No abnormality
Capacitance change: Within ± 12.5% （ BJ, B7, C6, C7 ）
Within ± 30% （ F ）
（
Dissipation factor ： 5.0% max. BJ, B7, C6, C7 ）
11.0% max. （ F ）
Insulation resistance: 50 M Ωμ F or 1000 M Ω , whichever is smaller.
Class 2
Standard
High Frequency Type
BJ, F
C6
B7, C7
Preconditioning
Temperature
Duration
Applied voltage
Charge/discharge current
Recovery
None
125 ± 3 ℃
1000 ＋ 48/ ー 0 hrs
Rated voltage × 2
50mA max.
6 to 24hr （ Standard condition ） Note 5
Preconditioning
Temperature
Duration
Applied voltage
Charge/discharge current
Recovery
Voltage treatment （ Twice the rated voltage shall be
applied for 1 hour at 85 ℃ , 105 ℃ or 125 ℃） Note 3, 4
85 ± 2 ℃ 105 ± 3 ℃ 125 ± 3 ℃
1000 ＋ 48/ ー 0 hrs
Rated voltage × 2 Note 4
50mA max.
24 ± 2 hrs （ Standard condition ） Note 5
Note 1
Note 2
Note 3
Note 4
Note 5
The ?gures indicate typical speci?cations. Please refer to individual speci?cations in detail.
Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150 ＋ 0/ － 10 ℃ for an hour and kept at room temperature for 24 ± 2hours.
Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage speci?ed in the test conditions, and
kept at room temperature for 24 ± 2hours.
150% of rated voltage is applicable to some items. Please refer to their speci?cations for further information.
Standard condition: Temperature: 5 to 35 ℃ , Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condi-
tion.
Temperature: 20 ± 2 ℃ , Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise speci?ed, all the tests are conducted under the "standard condition".
＊ This catalog contains the typical speci ?cation only due to the limitation of space. When you consider the purchase of our products, please check our speci ?cation.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_reli_e-01
12
mlcc_reli-R4
相关PDF资料 |
PDF描述 |
|---|---|
| L2K212BJ105MD-T | CAP ARRAY 2CH 1UF 10V 0805 |
| SFELA10M7HA00-B0 | FILTER 10.7MHZ 180KHZ BANDWIDTH |
| W2A2YA820KAT2A | CAP ARRAY 2CH 82PF 16V 0508 |
| W2A2YA560KAT2A | CAP ARRAY 2CH 56PF 16V 0508 |
| W2A2YA470KAT2A | CAP ARRAY 2CH 47PF 16V 0508 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| T4K71 | 制造商:TOSHIBA 制造商全称:Toshiba Semiconductor 功能描述:Built-in phase lock loop |
| T4-MC1228 | 功能描述:多向开关 Rocker Press Fit Low-Level Gray RoHS:否 制造商:C&K Components 控制类型:Multi-Directional 方向分辨率: 开关触点额定值: 中心按钮: 定向操纵力: 端接类型:PCB 工作角: 电位器额定功率: 主体大小:58.9 mm L x 43 mm W x 27.5 mm H 晶体管管座高度: 封装:Bulk |
| T4-MD1228 | 功能描述:多向开关 Cone Press Fit Low-Level Gray RoHS:否 制造商:C&K Components 控制类型:Multi-Directional 方向分辨率: 开关触点额定值: 中心按钮: 定向操纵力: 端接类型:PCB 工作角: 电位器额定功率: 主体大小:58.9 mm L x 43 mm W x 27.5 mm H 晶体管管座高度: 封装:Bulk |
| T4-MD1312 | 功能描述:多向开关 Cone Press Fit Standard Black RoHS:否 制造商:C&K Components 控制类型:Multi-Directional 方向分辨率: 开关触点额定值: 中心按钮: 定向操纵力: 端接类型:PCB 工作角: 电位器额定功率: 主体大小:58.9 mm L x 43 mm W x 27.5 mm H 晶体管管座高度: 封装:Bulk |
| T4-MD2222 | 功能描述:多向开关 Cone Threaded Low-Level Black RoHS:否 制造商:C&K Components 控制类型:Multi-Directional 方向分辨率: 开关触点额定值: 中心按钮: 定向操纵力: 端接类型:PCB 工作角: 电位器额定功率: 主体大小:58.9 mm L x 43 mm W x 27.5 mm H 晶体管管座高度: 封装:Bulk |
发布紧急采购，3分钟左右您将得到回复。