
TA1316AN
2002-10-04
25
Parameter
Explanation
Preset
V-BLK PHASE
Adjusts vertical BLK stop phase.
00000 (16H) ~11110 (46H) (1 H/STEP),
11111: Internal V-BLK off
32 H
V-FREQUENCY
Vertical free-running frequency. Sets vertical pull-in range (Table 1).
1281 H
COMPRESSION-BLK
PHASE-1/2
Adjusts compression BLK phase. Adjusts BLK at top and bottom (Table 2).
Off
P-MODE1/2
Selects picture mode. Selects between picture mute, half-tone, blue background,
and Y mute (Table 3).
P-MUTE 1
UNI-COLOR
Adjusts unicolor.
0000000 (
16.5dB) ~111 (0dB)
min
BRIGHTNESS
Adjusts brightness.
00000000 (
40 IRE) ~11111111 (+40 IRE)
Center
OSD-ACL
Turns OSD-ACL on/off.
0: Off,
1: On
On
COLOR
Adjusts color.
0000000: Color mute,
0000001 (
20dB or more) ~1111111 (+4.6dB)
C-MUTE
TINT
Adjusts tint.
0000000 (
32 deg) ~1111111 (+32 deg)
Center
RGB-ACL
Switches analog RGB-ACL sensitivity.
0:
6dB, 1: Normal
6 dB
PICTURE-SHARPNESS
Adjusts sharpness.
0000000 (
10dB or more) ~1111111 (+17dB (at peak FREQ) )
Center
YNR
YNR: Turns luminance (Y) noise reduction (NR) on/off.
0: Off,
1: On
Lower two bits of PICTURE-SHARPNESS (09-D2/D1)
= 00: Trap (at peak FREQ)
= 11: Flat
YNR level is controlled by lower two bits (09-D2) of PICTURE-SHARPNESS.
DL-APACON gain control by PICTURE-SHARPNESS is invalid.
Off
RGB-BRIGHTNESS
Adjusts RGB brightness.
0000000 (
20 IRE) ~1111111 (+20 IRE)
Center
DCRR-SW
Switches DC restoration rate.
0: 100% or more,
1: 100% or less
100% or more
HI BRT
Turns high bright color on/off.
0: Off,
1: On
On
RGB-CONTRAST
Adjusts RGB contrast.
0000000 (
16.5dB) ~1111111 (0dB)
min
SUB-CONTRAST
Adjusts sub-contrast.
00000 (
3.5dB) ~11111 (+2.6dB)
Center
WPS
Adjusts WPS level.
0: 110 IRE
1: 130 IRE
110 IRE
YUV INPUT MODE
Selects Y/color difference signal input mode.
00: Y/Cb/Cr,
01: Y/Pb/Pr,
10: Through,
11: Y/U/V (TA1270)
Control by pin takes priority at 00 and 01 (table 4).
(Ref.) Y/Cb/Cr: ITU-R BT 601
Y/Pb/Pr: ITU-R BT 709 (1125/60/2:1)
Y/Cb/Cr