- 您现在的位置：买卖IC网 > PDF目录98155 > TA8127N AM/FM, AUDIO SINGLE CHIP RECEIVER, PDIP24 PDF资料下载
参数资料
| 型号： | TA8127N |
| 元件分类： | 接收器 |
| 英文描述： | AM/FM, AUDIO SINGLE CHIP RECEIVER, PDIP24 |
| 封装： | 0.300 INCH, 1.78 MM PITCH, PLASTIC, SDIP-24 |
| 文件页数： | 9/17页 |
| 文件大小： | 1374K |
| 代理商： | TA8127N |
TDA9917_1
Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Objective data sheet
Rev. 01 — 9 June 2006
17 of 20
Philips Semiconductors
TDA9917
8-bit, up to 250 Msample/s Analog-to-Digital Converter (ADC)
– larger than or equal to 1.27 mm, the footprint longitudinal axis is preferred to be
parallel to the transport direction of the printed-circuit board;
– smaller than 1.27 mm, the footprint longitudinal axis must be parallel to the
transport direction of the printed-circuit board.
The footprint must incorporate solder thieves at the downstream end.
For packages with leads on four sides, the footprint must be placed at a 45
° angle to
the transport direction of the printed-circuit board. The footprint must incorporate
solder thieves downstream and at the side corners.
During placement and before soldering, the package must be xed with a droplet of
adhesive. The adhesive can be applied by screen printing, pin transfer or syringe
dispensing. The package can be soldered after the adhesive is cured.
Typical dwell time of the leads in the wave ranges from 3 seconds to 4 seconds at 250
°C
or 265
°C, depending on solder material applied, SnPb or Pb-free respectively.
A mildly-activated ux will eliminate the need for removal of corrosive residues in most
applications.
13.4 Manual soldering
Fix the component by rst soldering two diagonally-opposite end leads. Use a low voltage
(24 V or less) soldering iron applied to the at part of the lead. Contact time must be
limited to 10 seconds at up to 300
°C.
When using a dedicated tool, all other leads can be soldered in one operation within
2 seconds to 5 seconds between 270
°C and 320 °C.
13.5 Package related soldering information
[1]
For more detailed information on the BGA packages refer to the
(LF)BGA Application Note (AN01026);
order a copy from your Philips Semiconductors sales ofce.
[2]
All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the
maximum temperature (with respect to time) and body size of the package, there is a risk that internal or
external package cracks may occur due to vaporization of the moisture in them (the so called popcorn
effect). For details, refer to the Drypack information in the
Data Handbook IC26; Integrated Circuit
Packages; Section: Packing Methods.
Table 16.
Suitability of surface mount IC packages for wave and reow soldering methods
Package[1]
Soldering method
Wave
Reow[2]
BGA, HTSSON..T[3], LBGA, LFBGA, SQFP,
SSOP..T[3], TFBGA, VFBGA, XSON
not suitable
suitable
DHVQFN, HBCC, HBGA, HLQFP, HSO, HSOP,
HSQFP, HSSON, HTQFP, HTSSOP, HVQFN,
HVSON, SMS
not suitable[4]
suitable
PLCC[5], SO, SOJ
suitable
LQFP, QFP, TQFP
not recommended[5][6]
suitable
SSOP, TSSOP, VSO, VSSOP
not recommended[7]
suitable
CWQCCN..L[8], PMFP[9], WQCCN..L[8]
not suitable
相关PDF资料 |
PDF描述 |
|---|---|
| TA8127F | AM/FM, AUDIO SINGLE CHIP RECEIVER, PDSO24 |
| TA8132AFG | AM/FM, AUDIO SINGLE CHIP RECEIVER, PDSO24 |
| TA8132ANG | AM/FM, AUDIO SINGLE CHIP RECEIVER, PDIP24 |
| TA8132AN | AM/FM, AUDIO SINGLE CHIP RECEIVER, PDIP24 |
| TA8132AF | AM/FM, AUDIO SINGLE CHIP RECEIVER, PDSO24 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TA8129Z | 制造商:Panasonic Industrial Company 功能描述:IC |
| TA8129Z-26 | 制造商:TOSHIBA 制造商全称:Toshiba Semiconductor 功能描述:BIPOLAR LINEAR INTEGRATED CIRCUIT SILICON MONOLITHIC |
| TA8-13 | 制造商:Cooper Bussmann 功能描述:A38 TERM. BLOCK COVER - Bulk 制造商:Cooper Bussmann 功能描述:A38 TERM BLOCK COVER 制造商:COOPER BUSSMANN 功能描述:A38 TERM. BLOCK COVER |
| TA8132 | 制造商:TOSHIBA 制造商全称:Toshiba Semiconductor 功能描述:3V AM/FM IF+MPX (FOR DIGITAL TUNING SYSTEM) |
| TA8132AF | 制造商:TOSHIBA 制造商全称:Toshiba Semiconductor 功能描述:3V AM / FM IF + MPX (For Digital Tuning System) |
发布紧急采购，3分钟左右您将得到回复。