- 您现在的位置：买卖IC网 > PDF目录69402 > TB7101F(T5L2.5,F) SWITCHING REGULATOR, 1150 kHz SWITCHING FREQ-MAX, PDSO8 PDF资料下载
参数资料
| 型号： | TB7101F(T5L2.5,F) |
| 元件分类： | 稳压器 |
| 英文描述： | SWITCHING REGULATOR, 1150 kHz SWITCHING FREQ-MAX, PDSO8 |
| 封装： | 3 X 3 MM, 0.65 MM PITCH, PLASTIC, SON-8 |
| 文件页数： | 2/22页 |
| 文件大小： | 324K |
| 代理商： | TB7101F(T5L2.5,F) |
TB7101F(T5L1.2,F)/(T5L1.5,F)/(T5L1.8,F)/(T5L2.5,F)/(T5L3.3,F)
2008-04-09
10
Application Circuit Example
Figure 1 TB7101F(T5L*.*,F) Application Circuit Example
Component values (@TB7101F (T5L3.3, F), VIN = 5 V, Ta = 25°C)
These values are presented only as a guide.
CIN:
Input filter capacitor = 10
μF
(ceramic capacitor: GRM21BB30J106K from Murata Manufacturing Co., Ltd.)
COUT: Output filter capacitor = 10 μF
(ceramic capacitor: GRM21BB30J106K from Murata Manufacturing Co., Ltd.)
L:
Inductor = 3.3
μH (NP04SB3R3N from Taiyo Yuden Co., Ltd.)
Component values (@TB7101F (T5L1.2, F), VIN = 5 V, Ta = 25°C)
These values are presented only as a guide.
CIN:
Input filter capacitor = 10
μF
(ceramic capacitor: GRM21BB30J106K from Murata Manufacturing Co., Ltd.)
COUT: Output filter capacitor = 22 μF
(ceramic capacitor: GRM31CB30J226K from Murata Manufacturing Co., Ltd.)
L:
Inductor = 3.3
μH (NP04SB3R3N from Taiyo Yuden Co., Ltd.)
Component values need to be adjusted, depending on the TB7101F’s input/output conditions and the board layout.
Application Notes
Inductor Selection
The inductance required for inductor L can be calculated as follows:
IN
OUT
L
osc
OUT
IN
V
I
f
V
L
Δ
=
(1)
VIN
: Input voltage (V)
VOUT : Output voltage (V)
fosc
: Oscillation frequency
= 1 MHz (typ.)
ΔIL
: Inductor ripple current (A)
*: Generally,
ΔIL should be set to approximately 30% of the maximum output current. Since the maximum output
current of the TB7101F is 1 A,
ΔIL should be 0.3 A or so. Therefore, the inductor should have a current rating
greater than the peak output current of 1.15 A. If the inductor current rating is exceeded, the inductor becomes
saturated, leading to an unstable DC-DC converter operation.
When TB7101F (T5L3.3, F) and VIN = 5 V, the required inductance can be calculated as follows. Be sure to
select an appropriate inductor, taking the VIN range into account.
PGND
TB7101F (T5L*.*, F)
SGND
GND
VOUT
LX
VFB
C
OUT
GND
VIN
C
IN
C
EN
VIN
L
相关PDF资料 |
PDF描述 |
|---|---|
| TB7101F(T5L1.8,F) | SWITCHING REGULATOR, 1150 kHz SWITCHING FREQ-MAX, PDSO8 |
| TB7101F(T5L1.5,F) | SWITCHING REGULATOR, 1150 kHz SWITCHING FREQ-MAX, PDSO8 |
| TB7101F(T5L2.5,F) | SWITCHING REGULATOR, 1150 kHz SWITCHING FREQ-MAX, PDSO8 |
| TC1026CEUA | SPECIALTY ANALOG CIRCUIT, PDSO8 |
| TC1026CEUA | SPECIALTY ANALOG CIRCUIT, PDSO8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TB7102AF | 制造商:TOSHIBA 制造商全称:Toshiba Semiconductor 功能描述:Buck DC-DC Converter IC |
| TB7102AF(TE85L,F) | 功能描述:直流/直流开关转换器 High Freq 1000kHz 2.7V to 5.5V 1A DC RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT |
| TB7102AFTE85L | 制造商:TOSHIBA 制造商全称:Toshiba Semiconductor 功能描述:Buck DC-DC Converter IC |
| TB7102AFTE85LF | 制造商:TOSHIBA 制造商全称:Toshiba Semiconductor 功能描述:Buck DC-DC Converter IC |
| TB7102F | 制造商:TOSHIBA 制造商全称:Toshiba Semiconductor 功能描述:Step-down DC-DC Converter IC |
发布紧急采购，3分钟左右您将得到回复。