- 您现在的位置：买卖IC网 > PDF目录98168 > TC14433TELI 1-CH DUAL-SLOPE ADC, PQCC28 PDF资料下载
参数资料
| 型号： | TC14433TELI |
| 元件分类： | ADC |
| 英文描述： | 1-CH DUAL-SLOPE ADC, PQCC28 |
| 封装： | PLASTIC, LCC-28 |
| 文件页数： | 2/24页 |
| 文件大小： | 382K |
| 代理商： | TC14433TELI |
TC14433/A
DS21394D-page 10
2008 Microchip Technology Inc.
5.0
TYPICAL APPLICATIONS
The typical application circuit is an example of a 3-1/2
digit voltmeter using the TC14433 with Common-
anode displays. This system requires a 2.5V reference.
Full scale may be adjusted to 1.999V or 199.9 mV.
Input overrange is indicated by flashing a display. This
display uses LEDs with common anode digit lines.
Power supply for this system is shown as a dual ±5V
supply; however, the TC14433 will operate over a wide
voltage range
The circuit in Figure 5-1 shows a 3-1/2 digit LCD
voltmeter. The 14024B provides the low frequency
square wave signal drive to the LCD backplane. Dual
power supplies are shown here; however, one supply
may be used when VSS is connected to VEE. In this
case, VAG must be at least 2.8V above VEE.
When only segments b and c of the decoder are con-
nected to the 1/2 digit of the display, 4, 0, 7 and 3
appear as 1.
The overrange indication (Q3 = 0 and Q0 = 1) occurs
when the count is greater than 1999; (e.g., 1.999V for
a reference of 2V) The underrange indication, useful for
auto-ranging circuits, occurs when the count is less
than 180; (e.g., 0.180V for a reference of 2V).
TABLE 5-1:
TRUTH TABLE
Figure 5-2 is an example of a 3-1/2 digit LED voltmeter
with a minimum of external components, (only 11
additional components). In this circuit, the 14511B
provides the segment drive and the 75492 or 1413
provides sink for digit current. Display is blanked during
the overrange condition.
Note:
If the most significant digit is connected to
a display other than a “1” only, such as a
full digit display, segments other than b
and c must be disconnected. The BCD to
7-segment decoder must blank on BCD
inputs 1010 to 1111 (see Table 5-1).
Coded
Condition
of MSD
Q
3
Q
2
Q
1
Q
0
BDC to 7-Segment
Decoding
+01
1
0
Blank
-01
0
1
0
+0 UR
11
1
-0 UR
10
1
+10
1
0
4 – 1
0 – 1
7 – 1
3 – 1
Hook up
only segments
b and c to MSD
-10
0
+1 OR
01
1
-1 OR
00
1
Note 1:
Q3 – 1/2 digit, low for “1”, high for “0”.
Q2 – Polarity: “1” = positive, “0” = negative.
Q0 – Out of range condition exists if Q0 = 1.
When used in conjunction with Q3, the type
of out of range condition is indicated; i.e.,
Q3 = 0 → OR or Q3 = 1 → UR.
相关PDF资料 |
PDF描述 |
|---|---|
| TC14433AELI | 1-CH 3-BIT DUAL-SLOPE ADC, SERIAL ACCESS, PQCC28 |
| TC14433AELITR | 1-CH 3-BIT DUAL-SLOPE ADC, SERIAL ACCESS, PQCC28 |
| TC14433AEPG | DUAL-SLOPE ADC, PARALLEL ACCESS, PDIP24 |
| TC14433BEJG | CONVERTER SUBSYSTEM ADC, PARALLEL ACCESS, CDIP24 |
| TC14433BEPG | CONVERTER SUBSYSTEM ADC, PARALLEL ACCESS, PDIP24 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TC1471NPSR-SM | 制造商:Panasonic Industrial Company 功能描述:SERVICE MANUAL |
| TC14L | 制造商:TOSHIBA 制造商全称:Toshiba Semiconductor 功能描述:CMOS GATE ARRAY |
| TC14L050AF2077 | 制造商:tos 功能描述:Toshiba IC PLCC NEW |
| TC14L050AF-2077 | 制造商:tos 功能描述:Toshiba IC PLCC NEW |
| TC14L080AF-1067 | 制造商:Toshiba America Electronic Components 功能描述: |
发布紧急采购，3分钟左右您将得到回复。