- 您现在的位置：买卖IC网 > PDF目录20201 > TC7116CKW (Microchip Technology)IC ADC 3 1/2DGT LCD DVR 44-MQFP PDF资料下载
参数资料
| 型号： | TC7116CKW |
| 厂商： | Microchip Technology |
| 文件页数： | 11/24页 |
| 文件大小： | 0K |
| 描述： | IC ADC 3 1/2DGT LCD DVR 44-MQFP |
| 标准包装： | 96 |
| 显示器类型： | LCD |
| 配置： | 7 段显示 |
| 数字或字符： | A/D，3.5 位数字 |
| 电流 - 电源： | 800µA |
| 电源电压： | 9V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 44-QFP |
| 供应商设备封装： | 44-MQFP（10x10） |
| 包装： | 托盘 |
| 其它名称： | 158-1058 158-1058-ND |
TC7116/A/TC7117/A
3.2.1
SYSTEM TIMING
To achieve maximum rejection of 60Hz pickup, the sig-
The clocking method used for the TC7116/TC7116A
and TC7117/TC7117A is shown in Figure . Three
clocking methods may be used:
nal integrate cycle should be a multiple of 60Hz. Oscil-
lator frequencies of 240kHz, 120kHz, 80kHz, 60kHz,
48kHz, 40kHz, etc. should be selected. For 50Hz rejec-
tion, oscillator frequencies of 200kHz, 100kHz,
1.
2.
3.
An external oscillator connected to Pin 40.
A crystal between Pins 39 and 40.
An RC network using all three pins.
66-2/3kHz, 50kHz, 40kHz, etc. would be suitable. Note
that 40kHz (2.5 readings per second) will reject both
50Hz and 60Hz.
The oscillator frequency is ÷ 4 before it clocks the
decade counters. It is then further divided to form the
three convert cycle phases: Signal Integrate (1000
counts), Reference De-integrate (0 to 2000 counts),
and Auto-Zero (1000 to 3000 counts). For signals less
than full scale, auto-zero gets the unused portion of ref-
erence de-integrate. This makes a complete measure
cycle of 4000 (16,000 clock pulses), independent of
input voltage. For 3 readings per second, an oscillator
frequency of 48kHz would be used.
TC7117
TC7117A
Typical Segment Output
3.2.2 HOLD READING INPUT
When HLDR is at a logic HIGH, the latch will not be
updated. Analog-to-Digital conversions will continue,
but will not be updated until HLDR is returned to LOW.
To continuously update the display, connect to TEST
(TC7116/TC7116A) or GROUND (TC7117/TC7117A),
or disconnect. This input is CMOS compatible with
70k Ω typical resistance to TEST (TC7116/TC7116A) or
GROUND (TC7117/TC7117A).
0.5mA
V+
7-Segment
Decode
7-Segment
Decode
7-Segment
Decode
To
Segment
8mA
Digital Ground
Internal Digital Ground
Latch
Thousands
Hundreds
Tens
Units
To Switch Drivers
V+
From Comparator Output
Clock
÷ 4
Control Logic
500 Ω
35
37
V+
TEST
21
Digital
GND
40
OSC1
39
OSC2
38
OSC3
1
HLDR
~70k Ω
FIGURE 3-6:
TC7117/TC7117A Digital Section
? 2006 Microchip Technology Inc.
DS21457C-page 11
相关PDF资料 |
PDF描述 |
|---|---|
| HR-3U-2500F5 | BATT PACK 6.0V AA BUTTON NIMH |
| VE-25P-EV-F3 | CONVERTER MOD DC/DC 13.8V 150W |
| EBC28DCSD | CONN EDGECARD 56POS DIP .100 SLD |
| VE-JNB-CX-B1 | CONVERTER MOD DC/DC 95V 75W |
| TC7116CKW713 | IC ADC 3 1/2DGT LCD DVR 44-MQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TC7116CKW713 | 功能描述:LCD 驱动器 w/Hold RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| TC7116CLW | 功能描述:LCD 驱动器 w/Hold RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| TC7116CLW713 | 功能描述:LCD 驱动器 w/Hold RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| TC7116CPL | 功能描述:LCD 驱动器 w/Hold RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| TC7116CPL | 制造商:Microchip Technology Inc 功能描述:Analog/Digital Converter IC Number of Bi |
发布紧急采购，3分钟左右您将得到回复。