- 您现在的位置：买卖IC网 > PDF目录20201 > TC7116CLW (Microchip Technology)IC ADC 3 1/2DGT LCD DVR 44-PLCC PDF资料下载
参数资料
| 型号： | TC7116CLW |
| 厂商： | Microchip Technology |
| 文件页数： | 8/24页 |
| 文件大小： | 0K |
| 描述： | IC ADC 3 1/2DGT LCD DVR 44-PLCC |
| 标准包装： | 27 |
| 显示器类型： | LCD |
| 配置： | 7 段显示 |
| 数字或字符： | A/D，3.5 位数字 |
| 电流 - 电源： | 800µA |
| 电源电压： | 9V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 44-LCC（J 形引线） |
| 供应商设备封装： | 44-PLCC |
| 包装： | 管件 |
TC7116/A/TC7117/A
3.0
DETAILED DESCRIPTION
Since the comparator is included in the loop, AZ
accuracy is limited only by system noise. The offset
(All Pin Designations Refer to 40-Pin PDIP.)
referred to the input is less than 10 μ V.
3.1
Analog Section
3.1.2
SIGNAL INTEGRATE PHASE
tion for the TC7116/TC7116A and TC7117/TC7117A.
Each measurement cycle is divided into three phases:
(1) Auto-Zero (AZ), (2) Signal Integrate (INT), and
(3) Reference Integrate (REF), or De-integrate (DE).
3.1.1 AUTO-ZERO PHASE
High and low inputs are disconnected from the pins and
internally shorted to analog common. The reference
capacitor is charged to the reference voltage. A feed-
back loop is closed around the system to charge the
auto-zero capacitor (C AZ ) to compensate for offset volt-
ages in the buffer amplifier, integrator, and comparator.
The auto-zero loop is opened, the internal short is
removed, and the internal high and low inputs are
connected to the external pins. The converter then inte-
grates the differential voltages between V IN + and V IN -
for a fixed time. This differential voltage can be within a
wide Common mode range: 1V of either supply. How-
ever, if the input signal has no return with respect to the
converter power supply, V IN - can be tied to analog
common to establish the correct Common mode
voltage. At the end of this phase, the polarity of the
integrated signal is determined.
C REF
R INT
C AZ
C INT
C REF +
V REF +
C REF -
V BUFF
V+
Auto-Zero
V INT
V+
34
36
33
28
35
29
27
V IN +
31
10 μ A
INT
AZ
AZ
DE
(–)
DE
(+)
AZ
–
+
–
+
Low
Temp.
Drift
Zener
V REF
Integrator
–
+
+
Comparator
To
Digital
Section
Analog
Common
V IN -
32
30
INT
DE (+) DE (–)
AZ & DE (±)
26
V+ -3V
TC7116
TC7116A
TC7117
TC7117A
V-
FIGURE 3-1:
Analog Section of TC7116/TC7116A and TC7117/TC7117A
3.1.3
REFERENCE INTEGRATE PHASE
3.1.4
REFERENCE
The final phase is reference integrate, or de-integrate.
Input low is internally connected to analog common
and input high is connected across the previously
charged reference capacitor. Circuitry within the chip
ensures that the capacitor will be connected with the
correct polarity to cause the integrator output to return
to zero. The time required for the output to return to
zero is proportional to the input signal. The digital
reading displayed is:
EQUATION 3-1:
The positive reference voltage (V REF +) is referred to
analog common.
DS21457C-page 8
1000 =
V IN
V REF
? 2006 Microchip Technology Inc.
相关PDF资料 |
PDF描述 |
|---|---|
| TC7116CKW | IC ADC 3 1/2DGT LCD DVR 44-MQFP |
| HR-3U-2500F5 | BATT PACK 6.0V AA BUTTON NIMH |
| VE-25P-EV-F3 | CONVERTER MOD DC/DC 13.8V 150W |
| EBC28DCSD | CONN EDGECARD 56POS DIP .100 SLD |
| VE-JNB-CX-B1 | CONVERTER MOD DC/DC 95V 75W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TC7116CLW713 | 功能描述:LCD 驱动器 w/Hold RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| TC7116CPL | 功能描述:LCD 驱动器 w/Hold RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| TC7116CPL | 制造商:Microchip Technology Inc 功能描述:Analog/Digital Converter IC Number of Bi |
| TC7116IJL | 功能描述:LCD 驱动器 3-1/2 Digit A/D w/ Hold RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| TC7117 | 制造商:TELCOM 制造商全称:TelCom Semiconductor, Inc 功能描述:3-1/2 DIGIT ANALOG-TO-DIGITAL CONVERTERS WITH HOLD |
发布紧急采购，3分钟左右您将得到回复。