- 您现在的位置：买卖IC网 > PDF目录98174 > TC7116CLWTR 1-CH 13-BIT DUAL-SLOPE ADC, PQCC44 PDF资料下载
参数资料
| 型号： | TC7116CLWTR |
| 元件分类： | ADC |
| 英文描述： | 1-CH 13-BIT DUAL-SLOPE ADC, PQCC44 |
| 封装： | PLASTIC, LCC-44 |
| 文件页数： | 17/17页 |
| 文件大小： | 221K |
| 代理商： | TC7116CLWTR |
9
3-1/2 DIGIT ANALOG-TO-DIGITAL
CONVERTERS WITH HOLD
TC7116
TC7116A
TC7117
TC7117A
negative supply for externally-generated segment drivers,
such as decimal points or any other presentation the user
may want to include on the LCD. (Figures 5 and 6 show
such an application.) No more than a 1mA load should be
applied.
The second function is a "lamp test." When TEST is
pulled HIGH (to V+), all segments will be turned ON and
the display should read –1888. The TEST pin will sink
about 10 mA under these conditions.
DIGITAL SECTION
Figures 8 and 9 show the digital section for TC7116/
TC7116A and TC7117/TC7117A, respectively. For the
TC7116/TC7116A (Figure 8), an internal digital ground is
generated from a 6V zener diode and a large P-channel
source follower. This supply is made stiff to absorb the
relative large capacitive currents when the backplane (BP)
voltage is switched. The BP frequency is the clock fre-
quency
800. For 3 readings per second, this is a 60-Hz
square wave with a nominal amplitude of 5V. The seg-
ments are driven at the same frequency and amplitude,
and are inphase with BP when OFF, but out-of-phase
when ON. In all cases, negligible DC voltage exists across
the segments.
Figure 9 is the digital section of the TC7117/TC7117A.
It is identical to the TC7116/TC7116A, except that the
regulated supply and BP drive have been eliminated, and
the segment drive is typically 8 mA. The 1000's output (pin
19) sinks current from two LED segments, and has a 16-mA
drive capability. The TC7117/TC7117A are designed to
drive common anode LED displays.
In both devices, the polarity indication is ON for analog
inputs. If V
–
IN and V
+
IN are reversed, this indication can be
reversed also, if desired.
Figure 8. TC7116/TC7116A Digital Section
TC7116
TC7116A
LCD PHASE DRIVER
THOUSANDS
HUNDREDS
TENS
UNITS
4
BACKPLANE
21
39
37
OSC
INTERNAL DIGITAL GROUND
V
+
V
–
TEST
6.2V
500
26
35
TO SWITCH DRIVERS
FROM COMPARATOR OUTPUT
CLOCK
VTH = 1V
7-SEGMENT
DECODE
7-SEGMENT
DECODE
7-SEGMENT
DECODE
200
40
38
TYPICAL SEGMENT OUTPUT
INTERNAL DIGITAL GROUND
SEGMENT
OUTPUT
V
+
0.5mA
2mA
LATCH
2
OSC3
OSC1
÷
HLDR
70k
LOGIC CONTROL
1
相关PDF资料 |
PDF描述 |
|---|---|
| TC7116CLW | 1-CH 13-BIT DUAL-SLOPE ADC, ACCESS, PQCC44 |
| TC7116CKW | 1-CH 13-BIT DUAL-SLOPE ADC, ACCESS, PQFP44 |
| TC7117AIJL | 1-CH 13-BIT DUAL-SLOPE ADC, ACCESS, CDIP40 |
| TC7117IJL | 1-CH 13-BIT DUAL-SLOPE ADC, ACCESS, CDIP40 |
| TC7117CLWTR | 1-CH 13-BIT DUAL-SLOPE ADC, PQCC44 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TC7116CPL | 功能描述:LCD 驱动器 w/Hold RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| TC7116CPL | 制造商:Microchip Technology Inc 功能描述:Analog/Digital Converter IC Number of Bi |
| TC7116IJL | 功能描述:LCD 驱动器 3-1/2 Digit A/D w/ Hold RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| TC7117 | 制造商:TELCOM 制造商全称:TelCom Semiconductor, Inc 功能描述:3-1/2 DIGIT ANALOG-TO-DIGITAL CONVERTERS WITH HOLD |
| TC7117A | 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:3-1/2 Digit Analog-to-Digital Converters with Hold |
发布紧急采购，3分钟左右您将得到回复。