- 您现在的位置：买卖IC网 > PDF目录361409 > TC7129CKW (Microchip Technology Inc.) 4-1/2 Digit Analog-to-Digital Converters with On-Chip LCD Drivers PDF资料下载
参数资料
| 型号： | TC7129CKW |
| 厂商： | Microchip Technology Inc. |
| 元件分类： | 显示驱动器 |
| 英文描述： | 4-1/2 Digit Analog-to-Digital Converters with On-Chip LCD Drivers |
| 中文描述： | 4-1/2数字模拟到数字转换器与片上LCD驱动器 |
| 文件页数： | 11/15页 |
| 文件大小： | 214K |
| 代理商： | TC7129CKW |
3-241
TELCOM SEMICONDUCTOR, INC.
7
6
5
4
3
1
2
8
INTEGRATE
DEINTEGRATE
TIME
CLOCK PULSES
OVERSHOOT DUE TO ZERO CROSSING
BETWEEN CLOCK PULSES
INTEGRATOR RESIDUE VOLTAGE
OVERSHOOT CAUSED BY
COMPARATOR DELAY OF
1 CLOCK PULSE
Figure 10. Accuracy Errors in Dual-Slope Conversion
Figure 11. Integrator Waveform
INT1
INTEGRATE
DE1
DEINTEGRATE
REST X10
ZERO
INTEGRATE
AND LATCH
DE2
REST
X10
DE3
ZERO INTEGRATE
INTEGRATOR
RESIDUAL VOLTAGE
TC7129
NOTE:
Shaded area greatly expanded
in time and amplitude.
Inside the TC7129
Figure 12 shows a simplified block diagram of the
TC7129.
Integrator Section
The integrator section includes the integrator, compara-
tor, input buffer amplifier, and analog switches used to
change the circuit configuration during the separate mea-
surement phases described earlier.
Digital Auto-Zeroing
To eliminate the effect of amplifier offset errors, the
TC7129 uses a digital auto-zeroing technique. After the
input voltage is measured as described above, the mea-
surement is repeated with the inputs shorted internally. The
reading with inputs shorted is a measurement of the internal
errors and is subtracted from the previous reading to obtain
a corrected measurement. Digital auto-zeroing eliminates
the need for an external auto-zeroing capacitor used in other
ADCs.
TC7129
4-1/2 DIGIT ANALOG-TO-DIGITAL
CONVERTER WITH ON-CHIP LCD DRIVERS
相关PDF资料 |
PDF描述 |
|---|---|
| TC7129CLW | 4-1/2 Digit Analog-to-Digital Converters with On-Chip LCD Drivers |
| TC7129CPL | 4-1/2 Digit Analog-to-Digital Converters with On-Chip LCD Drivers |
| TC7129 | 4-1/2 DIGIT ANALOG-TO-DIGITAL CONVERTER WITH ON-CHIP LCD DRIVERS |
| TC7129CLW | 4-1/2 DIGIT ANALOG-TO-DIGITAL CONVERTER WITH ON-CHIP LCD DRIVERS |
| TC7129CPL | 4-1/2 DIGIT ANALOG-TO-DIGITAL CONVERTER WITH ON-CHIP LCD DRIVERS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TC7129CKW713 | 功能描述:LCD 驱动器 w/LCD Driver RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| TC7129CLW | 功能描述:LCD 驱动器 w/LCD Driver RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| TC7129CLW713 | 功能描述:LCD 驱动器 w/LCD Driver RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| TC7129CPL | 功能描述:LCD 驱动器 w/LCD Driver RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| TC7129CPL713 | 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:4-1/2 Digit Analog-to-Digital Converters with On-Chip LCD Drivers |
发布紧急采购，3分钟左右您将得到回复。