参数资料
型号: TC815CBU
元件分类: ADC
英文描述: 1-CH DUAL-SLOPE ADC, PQFP64
封装: PLASTIC, QFP-64
文件页数: 1/26页
文件大小: 575K
代理商: TC815CBU
2005 Microchip Technology Inc.
DS21474C-page 1
TC815
Features
Auto-Range Operation for AC and DC Voltage
and Resistance Measurements
- Two User Selected AC/DC Current Ranges
20mA and 200mA
22 Operating Ranges
- 9 DC/AC Voltage
- 4 AC/DC Current
- 9 Resistance and Low Power Ohms
Display HOLD Function
3-1/2 Digit Resolution in Auto-Range Mode:
- 1/2000
Extended Resolution in Manual Mode: 1/3000
Memory Mode for Relative Measurements:
-±5% F.S.
Internal AC to DC Conversion Op Amp
Triplex LCD Drive for Decimal Points, Digits
and Annunciators
Continuity Detection and Piezoelectric
Transducer Driver
Compact Surface Mounted 64-pin
Plastic Flat Package
Low Drift Internal Reference: 75ppm/°C
9V Battery Operation: 10mW
Low Battery Detection and LCD Annunciator
Device Selection Table
General Description
The TC815 is a 3-1/2 digit integrating analog-to-digital
converter with triplex LCD display drive and automatic
ranging. A display hold function is on-chip. Input volt-
age/ohm attenuators ranging from 1 to 1/10,000 are
automatically selected. Five full scale ranges are pro-
vided. The CMOS TC815 contains all the logic and
analog switches needed to manufacture an auto-
ranging instrument for ohms and voltage measure-
ments. User selected 20mA and 200mA current ranges
are available. Full scale range and decimal point LCD
annunciators are automatically set in auto-range oper-
ation. Auto-range operation is available during ohms
(high and low power ohms) and voltage (AC and DC)
measurements, eliminating expensive range switches
in hand-held DMM designs. The auto-range feature
may be bypassed allowing decimal point selection and
input attenuator selection control through a single line
input. Expensive rotary switches are not required.
During Manual mode operation, resolution is extended
to 3000 counts full scale. The extended range opera-
tion is indicated by a flashing 1 MSD. The extended
resolution is also available during 200k
Ω and 2000V
full scale auto-range operation.
The Memory mode subtracts a reading, up to ±5% of
full scale from subsequent measurements. Typical
applications involve probe resistance compensation for
resistance measurements, tolerance measurements,
and tare weight measurements.
The TC815 includes an AC to DC converter for
AC measurements. Only external diodes/resistors/
capacitors are required.
A complete LCD annunciator set describes the TC815
meter function and measurement range during ohms,
voltage and current operation. AC measurements are
indicated as well as auto-range operation. A low battery
detection circuit also sets the low battery display
annunciator. The triplex LCD display drive levels may
be set and temperature compensation applied via the
VDISP pin. With HOLD low, the display is not updated.
A HOLD mode LCD annunciator is activated.
The “low ohms” measurement option allows in-circuit
resistance measurements by preventing semiconduc-
tor junctions from being forward biased.
Part Number
Package
Operating
Temperature Range
TC815CBU
64-Pin PQFP
0
°C to +70°C
3-1/2 Digit Auto-Ranging A/D Converter with
Triplex LCD Drive and Display Hold Function
Obsolete Device
相关PDF资料
PDF描述
TC815CBUTR 1-CH DUAL-SLOPE ADC, PQFP64
TC818ACBU 1-CH DUAL-SLOPE ADC, ACCESS, PQFP64
TC818ACBU 1-CH DUAL-SLOPE ADC, PQFP64
TC818ACBUTR 1-CH DUAL-SLOPE ADC, PQFP64
TC818DCOP CONVERTER SUBSYSTEM ADC, PARALLEL ACCESS, PDSO20
相关代理商/技术参数
参数描述
TC-815-SC 制造商:Thomas & Betts 功能描述:
TC815-TB 制造商:Thomas & Betts 功能描述:CABLE TIE .8X1" IN-LINE SCREW MT-#1 制造商:Thomas & Betts 功能描述:CABLE TIES
TC817 制造商:THOMAS & BETTS 功能描述:
TC8-17S243.3R 制造商:TRUMPOWER 制造商全称:Tumbler Technologies + TRUMPower 功能描述:DC/DC CONVERTERS 2:1 Input, 12.5 to 20 Watt
TC8-17S483.3R 制造商:TRUMPOWER 制造商全称:Tumbler Technologies + TRUMPower 功能描述:DC/DC CONVERTERS 2:1 Input, 12.5 to 20 Watt