TC83230-0004
2003-03-31
11
[#/P]...................... If pressed after the numerical key entry, prints the contents of the key entry data
register together with the # symbol, but does not change the current state. If the
key is pressed after a key except the numerical keys or [
+/] key, does not change
the contents of the displays or the current state. If the key is pressed in clock
mode, automatically prints the displayed date and time.
+TAXI/II .............
TAXI/II
Calculate included tax operation or excluded tax operation. But, only prints and
does not express the tax. Prints or displays the result-value. (result-value adjusts
decimal-point (TAB) setting.) Feeds the paper one line after prints.
TAXI key operation example:
(TAX
= 3%)
a [
+TAXI] ....... a (3/100)
(prints TAX)
....... a
+ (a (3/100))
(included TAX)
a [
TAXII] ....... a/(1 + 3/100) a (prints TAX)
....... a/(1
+ 3/100)
(excluded TAX)
If pressed at key entry after number key entry, calculate the tax as a result of
calculation.
When multiplication/division instruction is stored in memory.
[P/NP]................... Switches between PRINT and NON-PRINT mode. At reset, NON-PRINT mode is
set. Switches mode in each time when the [P/NP] key is pressed: P
→ NP → P →
NP. In PRINT mode, displays “print mode”. Valid only when the [ /L
T ] lock key is
off.
[RND] ................... Switches between round-up, round-off and half-adjust. At reset, half-adjust is set.
Switches the mode in each time when the [RND] key is pressed: 5/4
→ ↓ → ↑ → 5/4
→ ↓ → ↑. Displays round-up/round-off. Valid only when the [ /L
T ] lock key is off.
[EXC].................... If an multiplication or division instruction is not stored in memory, it is invalid.
Constant calculation of multiplication or division instruction exchange for the
value of displays, and displays it.
[GT MOD] ............ Exchange GT-mode. (initial setting isn’t support GT-mode.)
GT mode cycles not-support and support. And display GT-mode flag.
Only touch key mode is valid.
[IC MOD] ............. Exchange IC-mode. (initial setting isn’t support IC-mode.)
IC-mode cycles not-support, IC
+ and IC±-mode. And display IC-mode flag. Any
touch key mode is valid.
[
]...................... Operates root-instruction and displays result-value with print. (result-value
adjusts decimal-point (TAB) setting.)
After prints feeds the paper one line. If the value is minus, change to the plus
value and operate root-instruction. Then produce an estimate calculation-error.
But keep the arithmetic instruction and date-register.