- 您现在的位置：买卖IC网 > PDF目录18727 > TCS3103FN (AMS-TAOS USA Inc)IC COLOR SENSOR LIGHT-VOLT 4-DFN PDF资料下载
参数资料
| 型号： | TCS3103FN |
| 厂商： | AMS-TAOS USA Inc |
| 文件页数： | 7/13页 |
| 文件大小： | 0K |
| 描述： | IC COLOR SENSOR LIGHT-VOLT 4-DFN |
| 标准包装： | 3,500 |
| 系列： | * |
| 其它名称： | TCS3103-FN |
TCS3103, TCS3104
LIGHT-TO-VOLTAGE COLOR SENSOR
TAOS108B ? JULY 2010
APPLICATION INFORMATION
Power Supply Considerations
The power supply lines (V DD and GND) should be bypassed by placing an 0.1- μ F capacitor with low ESR and
short leads (ideally, a surface mount ceramic type) as close as possible to the device package.
Output Interface
Although the output of the device can be connected to a comparator for simple threshold measurements, or to
another amplifier stage, most applications will require that the three channels be connected to analog-to-digital
converters (ADCs) so that the light and color information can be processed by a microcontroller, computer, or
other device. In many cases, the outputs can be directly connected to the ADC inputs. In some cases, for
example if the light is modulated, it may be desirable to insert active or passive low-pass filters on the channels
prior to the ADC, to smooth out the modulation ripple that would otherwise result in noisy measurements. The
cutoff frequency of the filters would, of course, depend upon the modulation frequency of the incoming light. With
a pulse-width modulated (PWM) input light signal, it may be possible to synchronize the ADC sampling with the
on-time of the PWM signal. In this case, a low-pass filter would not be required because the device output would
be sampled only during the on time of the input light source. A recommendation for minimum pulse width
would be 3 × the rise time of the device under the chosen gain setting.
Device Power Up
The TCS310x should use the following power up sequence: A stable ground reference from the system should
be applied first, followed by the V DD power applied second. This means V DD cannot be applied while the GND
pin is floating or without a ground reference. Afterward, the MFP pin may be biased or driven. The MFP pin must
always have a valid logic reference level. The pin may be biased or driven to a logical high or logical low level.
PCB Pad Layout
Suggested PCB pad layout guidelines for the Dual Flat No-Lead (FN) surface mount package are shown in
Figure 6.
2.90
1.30
1.30
0.40
0.65
1.70
0.65
0.40
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
Figure 6. Suggested FN Package PCB Layout
Copyright E 2010, TAOS Inc.
6
r
www.taosinc.com
r
The LUMENOLOGY r Company
相关PDF资料 |
PDF描述 |
|---|---|
| ISL1561IRZ-T13 | IC XDSL LINE DVR DUAL-PORT 24QFN |
| OPB780 | SENSOR REFLECT COLOR ASSEMBLY |
| CLS15-22C/L213B/TR8 | IR COLOR SENSOR RGB |
| CLS15-22C/L213R/TR8 | IR COLOR SENSOR RGB |
| PROPOWER-3.3V-KIT | KIT IN-LINE REGULATOR +3.3V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TCS3104 | 制造商:TAOS 制造商全称:TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS 功能描述:LIGHT-TO-VOLTAGE COLOR SENSOR |
| TCS3104FN | 功能描述:光频率和光电压 TRI Color Sensor LTV w/1x-4x Gain RoHS:否 制造商:ams 峰值波长:1000 nm 工作电源电压:5 V 最大工作温度:+ 85 C 最小工作温度:- 25 C 安装风格: 封装 / 箱体: |
| TCS3200 | 制造商:TAOS 制造商全称:TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS 功能描述:COLOR LIGHT-TO-FREQUENCY CONVERTER |
| TCS3200D | 制造商:Texas Advanced Optoelectronics 功能描述:IC,SENSOR,PHOTODIODES,PROGRAMM |
| TCS3200D-TR | 功能描述:光频率和光电压 TriColor Sensor LTF Low Power RoHS:否 制造商:ams 峰值波长:1000 nm 工作电源电压:5 V 最大工作温度:+ 85 C 最小工作温度:- 25 C 安装风格: 封装 / 箱体: |
发布紧急采购，3分钟左右您将得到回复。