参数资料
型号: TCS3404FN
厂商: AMS-TAOS USA Inc
文件页数: 11/41页
文件大小: 0K
描述: IC COLOR SENSOR DGTL PROGR 6-DFN
标准包装: 1
系列: *
其它名称: TCS3404-FNDKR
TCS3404, TCS3414
DIGITAL COLOR SENSORS
TAOS137A ? APRIL 2011
SMBus and I 2 C Protocols
Each Send and Write protocol is, essentially, a series of bytes. A byte sent to the TCS3404/14 with the most
significant bit (MSB) equal to 1 will be interpreted as a COMMAND byte. The lower four bits of the COMMAND
byte form the register select address (see Table 1), which is used to select the destination for the subsequent
byte(s) received. The TCS3404/14 responds to any Receive Byte requests with the contents of the register
specified by the stored register select address.
The TCS3404/14 implements the following protocols of the SMB 2.0 specification:
D
D
D
D
D
D
D
Send Byte Protocol
Receive Byte Protocol
Write Byte Protocol
Write Word Protocol
Read Word Protocol
Block Write Protocol
Block Read Protocol
The TCS3404/14 implements the following protocols of the I 2 C specification:
D I 2 C Write Protocol
D I 2 C Read (Combined Format) Protocol
When an SMBus Block Write or Block Read is initiated (see description of COMMAND Register), the byte
following the COMMAND byte is ignored but is a requirement of the SMBus specification. This field contains
the byte count (i.e. the number of bytes to be transferred). The TCS3404 (SMBus) device ignores this field and
extracts this information by counting the actual number of bytes transferred before the Stop condition is
detected.
When an I 2 C Write or I 2 C Read (Combined Format) is initiated, the byte count is also ignored but follows the
SMBus protocol specification. Data bytes continue to be transferred from the TCS3414 (I 2 C) device to Master
until a NACK is sent by the Master.
The data formats supported by the TCS3404 and TCS3414 devices are:
D Master transmitter transmits to slave receiver (SMBus and I 2 C):
?
The transfer direction in this case is not changed.
D Master reads slave immediately after the first byte (SMBus only):
?
At the moment of the first acknowledgment (provided by the slave receiver) the master transmitter
becomes a master receiver and the slave receiver becomes a slave transmitter.
D Combined format (SMBus and I 2 C):
?
During a change of direction within a transfer, the master repeats both a START condition and the slave
address but with the R/W bit reversed. In this case, the master receiver terminates the transfer by
generating a NACK on the last byte of the transfer and a STOP condition.
For a complete description of SMBus protocols, please review the SMBus Specification at
http://www.smbus.org/specs. For a complete description of the I 2 C protocol, please review the NXP I 2 C design
specification at http://www.i2c?bus.org/references/.
Copyright E 2011, TAOS Inc.
10
r
www.taosinc.com
r
The LUMENOLOGY r Company
相关PDF资料
PDF描述
TC32N3C32K7680 OSCILLATOR 32.7680 KHZ 2.5V SMD
TC32L3C32K7680 OSCILLATOR 32.7680 KHZ 3.3V SMD
72905-0 CLIP LEAD FOR MICRO GRABBER BLK
TC32V3I32K7680 OSCILLATOR 32.7680 KHZ 1.5V SMD
TC32N3I32K7680 OSCILLATOR 32.7680 KHZ 2.5V SMD
相关代理商/技术参数
参数描述
TCS3413 制造商:TAOS 制造商全称:TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS 功能描述:DIGITAL COLOR SENSORS
TCS3413CS 功能描述:光学数位转换器 TriColor Sensor RGB, Clear Ch RoHS:否 制造商:ams 数据总线宽度: 峰值波长:470 nm 最大工作频率: 工作电源电压: 工作电流: 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:Chipscale-6 封装:Reel
TCS3413FN 功能描述:光学数位转换器 TRI Color Sensor LTD I2C 6 Pin ODFN RoHS:否 制造商:ams 数据总线宽度: 峰值波长:470 nm 最大工作频率: 工作电源电压: 工作电流: 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:Chipscale-6 封装:Reel
TCS3414 制造商:TAOS 制造商全称:TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS 功能描述:DIGITAL COLOR SENSORS
TCS3414CS 功能描述:光学数位转换器 TriColor Sensor RGB, Clear Ch RoHS:否 制造商:ams 数据总线宽度: 峰值波长:470 nm 最大工作频率: 工作电源电压: 工作电流: 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:Chipscale-6 封装:Reel