- 您现在的位置：买卖IC网 > PDF目录98188 > TDA1519CTD/N3,112 (NXP SEMICONDUCTORS) 11 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO20 PDF资料下载
参数资料
| 型号： | TDA1519CTD/N3,112 |
| 厂商： | NXP SEMICONDUCTORS |
| 元件分类： | 音频／视频放大 |
| 英文描述： | 11 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO20 |
| 封装： | PLASTIC, SOT-397-1, HSOP-20 |
| 文件页数： | 10/22页 |
| 文件大小： | 1155K |
| 代理商： | TDA1519CTD/N3,112 |
2004 Jan 28
18
NXP Semiconductors
Product specification
22 W BTL or 2
11 W
stereo power amplifier
TDA1519C
dispensing. The package can be soldered after the adhesive is cured.
Typical dwell time of the leads in the wave ranges from 3 to 4 seconds at 250
C or 265 C, depending on solder material
applied, SnPb or Pb-free respectively.
A mildly-activated flux will eliminate the need for removal of corrosive residues in most applications.
MANUAL SOLDERING
Fix the component by first soldering two diagonally-opposite end leads. Use a low voltage (24 V or less) soldering iron
applied to the flat part of the lead. Contact time must be limited to 10 seconds at up to 300
C. When using a dedicated
tool, all other leads can be soldered in one operation within 2 to 5 seconds between 270 and 320
C.
Suitability of IC packages for wave, reflow and dipping soldering methods
Notes
1. For more detailed information on the BGA packages refer to the “(LF)BGA Application Note” (AN01026); order a copy
from your NXP Semiconductors sales office.
2. All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the maximum
temperature (with respect to time) and body size of the package, there is a risk that internal or external package
cracks may occur due to vaporization of the moisture in them (the so called popcorn effect). For details, refer to the
Drypack information in the “Data Handbook IC26; Integrated Circuit Packages; Section: Packing Methods”.
3. For SDIP packages, the longitudinal axis must be parallel to the transport direction of the printed-circuit board.
4. Hot bar soldering or manual soldering is suitable for PMFP packages.
5. These transparent plastic packages are extremely sensitive to reflow soldering conditions and must on no account
be processed through more than one soldering cycle or subjected to infrared reflow soldering with peak temperature
exceeding 217
C 10 C measured in the atmosphere of the reflow oven. The package body peak temperature
must be kept as low as possible.
6. These packages are not suitable for wave soldering. On versions with the heatsink on the bottom side, the solder
cannot penetrate between the printed-circuit board and the heatsink. On versions with the heatsink on the top side,
the solder might be deposited on the heatsink surface.
7. If wave soldering is considered, then the package must be placed at a 45
angle to the solder wave direction.
The package footprint must incorporate solder thieves downstream and at the side corners.
MOUNTING
PACKAGE(1)
SOLDERING METHOD
WAVE
REFLOW(2) DIPPING
Through-hole mount CPGA, HCPGA
suitable
suitable
DBS, DIP, HDIP, RDBS, SDIP, SIL
suitable(3)
Through-hole-
surface mount
not suitable
Surface mount
BGA, HTSSON..T(5), LBGA, LFBGA, SQFP,
SSOP-T(5), TFBGA, USON, VFBGA
not suitable
suitable
DHVQFN, HBCC, HBGA, HLQFP, HSO,
HSOP, HSQFP, HSSON, HTQFP, HTSSOP,
HVQFN, HVSON, SMS
not suitable(6)
suitable
PLCC(7), SO, SOJ
suitable
LQFP, QFP, TQFP
SSOP, TSSOP, VSO, VSSOP
not recommended(9)
suitable
not suitable
相关PDF资料 |
PDF描述 |
|---|---|
| TDA1519CTH/N3,512 | 11 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO20 |
| TDA1519CTD/N3,118 | 11 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO20 |
| TDA1545AN | SERIAL INPUT LOADING, 0.2 us SETTLING TIME, 16-BIT DAC, PDIP8 |
| TDA1545ATD-T | SERIAL INPUT LOADING, 0.2 us SETTLING TIME, 16-BIT DAC, PDSO8 |
| TDA1546T-T | SERIAL INPUT LOADING, 20-BIT DAC, PDSO28 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TDA1519CTH | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:22WBTL or 2 x 11Wstereo power amplifier |
| TDA1519CTH/N3,512 | 功能描述:音频放大器 CARRADIO POWER AMPLIFIERS RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel |
| TDA1519CTH/N3,518 | 功能描述:音频放大器 CARRADIO POWER AMPLIFIERS RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel |
| TDA1519CTH/N3C,118 | 功能描述:音频放大器 CARRADIO POWER AMPS RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel |
| TDA1519CTH/N3C-T | 功能描述:音频放大器 CARRADIO POWER AMPS RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。