- 您现在的位置：买卖IC网 > PDF目录98189 > TDA2030AL-TA5-T (UNISONIC TECHNOLOGIES CO LTD) 18 W, 1 CHANNEL, AUDIO AMPLIFIER, SFM5 PDF资料下载
参数资料
| 型号： | TDA2030AL-TA5-T |
| 厂商： | UNISONIC TECHNOLOGIES CO LTD |
| 元件分类： | 音频／视频放大 |
| 英文描述： | 18 W, 1 CHANNEL, AUDIO AMPLIFIER, SFM5 |
| 封装： | LEAD FREE, TO-220, 5 PIN |
| 文件页数： | 3/14页 |
| 文件大小： | 218K |
| 代理商： | TDA2030AL-TA5-T |
TDA2030A
LINEAR INTEGRATED CIRCUIT
UNISONICTECHNOLOGIESCO.,LTD
11 of 14
www.unisonic.com.tw
QW-R107-005,C
TRANSIENT INTER-MODULATION DISTORTION(TIM)
Transient inter-modulation distortion is an unfortunate phenomena associated with negative-feedback amplifiers.
When a feedback amplifier receives an input signal which rises very steeply, i.e. contains high-frequency
components, the feedback can arrive too late so that the amplifiers overloads and a burst of inter-modulation
distortion will be produced as in Fig.5. Since transients occur frequently in music this obviously a problem for the
designed of audio amplifiers. Unfortunately, heavy negative feedback is frequency used to reduce the total harmonic
distortion of an amplifier, which tends to aggravate the transient inter-modulation (TIM situation.)
20 to 40W
Amplifier
20 to 40W
Amplifier
20 to 40W
Amplifier
20 to 40W
Amplifier
PRE AMPLIFIER
POWER
AMPLIFIER
FEEDBACK
PATH
INPUT
V1
V2
V3
V4
OUTPUT
V1
V2
V3
V4
Fig.4 High Power Active Box For Musical Instrument
Fig.5 Overshoot Phenomenon In Feedback Amplifiers
The best known method for the measurement of TIM consists of feeding sine waves superimposed onto square
wavers, into the amplifier under test. The output spectrum is then examined using a spectrum analyzer and
compared to the input. This method suffers from serious disadvantages: the accuracy is limited, the measurement is
a tatter delicate operation and an expensive spectrum analyzer is essential.
The "inverting-sawtooth" method of measurement is based on the response of an amplifier to a 20KHz saw-tooth
wave-form. The amplifier has no difficulty following the slow ramp but it cannot follow the fast edge. The output will
follow the upper line in Fig. 6 cutting of the shade area and thus increasing the mean level. If this output signal is
filtered to remove the saw-tooth, direct voltage remains which indicates the amount of TIM distortion, although it is
difficult to measure because it is indistinguishable from the DC offset of the amplifier. This problem is neatly avoided
in the IS-TIM method by periodically inverting the saw-tooth wave-form at a low audio frequency as shown in Fig.7.In
the case of the saw-tooth in Fig. 8 the mean level was increased by the TIM distortion, for a saw-tooth in the other
direction the opposite is true.
m2
m1
SR(V/ s)
Input
Signal
Filtered
Output
Siganal
Fig.6 20kHz Sawtooth Waveform
Fig. 7 Inverting Sawtooth Waveform
相关PDF资料 |
PDF描述 |
|---|---|
| TDA2030AL-TB5-T | 18 W, 1 CHANNEL, AUDIO AMPLIFIER, ZFM5 |
| TDA2030AH | 18 W, 1 CHANNEL, AUDIO AMPLIFIER, PZFM5 |
| TDA2030AV | 18 W, 1 CHANNEL, AUDIO AMPLIFIER, PZFM5 |
| TDA2030H | 18 W, 1 CHANNEL, AUDIO AMPLIFIER, PZFM5 |
| TDA2030V | 18 W, 1 CHANNEL, AUDIO AMPLIFIER, PZFM5 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TDA2030AL-TB5-T | 制造商:UTC-IC 制造商全称:UTC-IC 功能描述:18W HI-FI AUDIO AMPLIFIER AND 35W DRIVER |
| TDA2030A-TA5-T | 制造商:UTC-IC 制造商全称:UTC-IC 功能描述:18W HI-FI AUDIO AMPLIFIER AND 35W DRIVER |
| TDA2030A-TB5-T | 制造商:UTC-IC 制造商全称:UTC-IC 功能描述:18W HI-FI AUDIO AMPLIFIER AND 35W DRIVER |
| TDA2030AV | 功能描述:音频放大器 18W Hi-Fi Amplifier RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel |
| TDA2030AV | 制造商:STMicroelectronics 功能描述:IC AUDIO AMP 18W |
发布紧急采购，3分钟左右您将得到回复。