- 您现在的位置：买卖IC网 > PDF目录299960 > TDA4863-2G (INFINEON TECHNOLOGIES AG) POWER FACTOR CONTROLLER, PDSO8 PDF资料下载
参数资料
| 型号： | TDA4863-2G |
| 厂商： | INFINEON TECHNOLOGIES AG |
| 元件分类： | 稳压器 |
| 英文描述： | POWER FACTOR CONTROLLER, PDSO8 |
| 封装： | PLASTIC, SO-8 |
| 文件页数： | 3/27页 |
| 文件大小： | 284K |
| 代理商： | TDA4863-2G |
第1页第2页当前第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页
TDA4863-2
Functional Description
Data Sheet
11
V1.2, 2004-02
To prevent false tripping the zero current detector is designed as a Schmitt-Trigger with
a hysteresis of 0.5 V. An internal 5 V clamp protects the input from overvoltage
breakdown, a 0.6 V clamp prevents substrate injection. An external resistor has to be
used in series with the auxiliary winding to limit the current through the clamps.
2.8
Restart Timer
The restart timer function eliminates the need of an oscillator. The timer starts or restarts
the TDA4863-2 when the driver output has been off for more than 150 s after the
inductor current reaches zero.
2.9
Undervoltage Lockout
An undervoltage lockout circuitry switches the IC on when V
CC reaches the upper
threshold V
CCH and switches the IC off when VCC is falling below the lower threshold VCCL.
During start up the supply current is less then 100 A.
An internal voltage clamp has been added to protect the IC from V
CC overvoltage
condition. When using this clamp special care must be taken on power dissipation.
Start up current is provided by an external start up resistor which is connected from the
AC line to the input supply voltage V
CC and a storage capacitor which is connected from
VCC to ground. Be aware that this capacitor is discharged before the IC is plugged into
the application board. Otherwise the IC can be destroyed due to the high capacitor
voltage.
Bootstrap power supply is created with the previous mentioned auxiliary winding and a
diode (see “Application Circuit” on Page 21).
2.10
Gate Drive
The TDA4863-2 totem pole output stage is MOSFET compatible. An internal protection
ciruitry is activated when V
CC is within the start up phase and ensures that the MOSFET
is turned off. The totem pole output has been optimized to achieve minimized cross
conduction current during high speed operation.
Compared to TDA4863 a bigger MOS Transistor can be driven by the TDA4863-2. When
a big MOSFET is used in applications with TDA4863, for example SPP20N60C3, the
falling edge of the gate drive voltage can swing under GND and can cause false
triggering of the IC. To prevent false triggering the gate drive voltage of theTDA 4863-2
at low state and gate current I
GT= 0mA is set to VGTL= 0.85V (TDA4863: VGTL=0.25V).
The difference between TDA4863-2 and TDA4863 is also depicted in diagramm: gate
drive voltage low state on page 20.
相关PDF资料 |
PDF描述 |
|---|---|
| TDA8042MDK-T | 175 MHz - 325 MHz RF/MICROWAVE QUADRAPHASE DEMODULATOR |
| TDC550MM-5 | INTERCONNECTION DEVICE |
| TDP08H0SBD1R | PIANO DIP SWITCH-8SWITCHES, SPST, MOMENTARY,0.025A, 24VDC, SURFACE MOUNT-STRAIGHT |
| TDP08H0SBD1 | PIANO DIP SWITCH-8SWITCHES, SPST, MOMENTARY,0.025A, 24VDC, SURFACE MOUNT-STRAIGHT |
| TDPXEB-40M34S-0301 | 40 CONTACT(S), FEMALE, MULTIWAY RACK AND PANEL CONN, SOLDER, RECEPTACLE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TDA48632GNT | 功能描述:功率因数校正 IC PFC IC High Power and Low THD 20V RoHS:否 制造商:Fairchild Semiconductor 开关频率:300 KHz 最大功率耗散: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 封装:Reel |
| TDA48632GXUMA2 | 制造商:Infineon Technologies AG 功能描述:Power Factor Correction CONTRLR 0.02mA 8-Pin DSO 制造商:Infineon Technologies AG 功能描述:INDUSTRIAL IC - Tape and Reel 制造商:Infineon Technologies AG 功能描述:IC PFC CONTROLLER DCM DSO8 |
| TDA48632HKLA1 | 制造商:Infineon Technologies AG 功能描述:Power Factor Correction CONTRLR 0.02mA 8-Pin PDIP 制造商:Infineon Technologies AG 功能描述:INDUSTRIAL IC - Rail/Tube 制造商:Infineon Technologies AG 功能描述:IC PFC CONTROLLER DCM 8DIP |
| TDA4863A | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Vertical deflection booster |
| TDA4863AJ | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Vertical deflection booster |
发布紧急采购，3分钟左右您将得到回复。