参数资料
型号: TDA7705TR
厂商: STMICROELECTRONICS
元件分类: 接收器
英文描述: AUDIO/VIDEO DEMODULATOR, PQFP64
封装: 10 X 10 MM, 1.40 MM HEIGHT, ROHS COMPLIANT, LQFP-64
文件页数: 4/42页
文件大小: 396K
代理商: TDA7705TR
Function description
TDA7705
Doc ID 15938 Rev 8
2.12
IO interface pins
The TDA7705 has the following IO pins:
The pins labeled GPIO0, 1, 2 and 3 (pins 43 to 40) are reserved.
The pin PLLTEST output voltage can be freely programmed via software and be used to
drive switches if needed by the application.
All the inputs are voltage-tolerant up to 3.5 V . The outputs can drive currents up to 0.5 mA
from the internal 3.3 V supply line.
2.13
Serial interface
The device is controlled with a standard I2C bus or SPI interface.
Through the serial bus the processing parameters can be modifed and the signal quality
parameters and the RDS information can be read out.
The operation of the device is handled through high level commands sent by the main car-
radio P through the serial interface, which allow to simplify the operations carried out in the
main P. The high level commands include among others:
set frequency (which allows to avoid computing the PLL divider factors);
start seek (the seek operation can be carried out by the TDA7705 in a completely
autonomous fashion);
RDS seek/search (jumps to AF and quality measurements are automatically
sequenced).
2.13.1
Serial interface choice / boot mode
The device can communicate with the main P with two different standard serial protocols:
SPI and I2C. The configuration is chosen by setting the proper value (0V or 3.3V) at pins 35
and 39 and it is latched (e.g. made effective) when the RSTN line transitions from low to
high (when RSTN is low, the IC is in reset mode).
The voltage level forced to pins 35 and 39 must be released to start the system operation a
suitable time after the RSTN line has gone high.
The list of configurations is shown in the following table:
PLLTEST
pin 2
general purpose output
SPI_CS
pin 34
serial communication with P
SPI_MISO
pin 35
serial communication with P
SDA/MOSI
pin 36
serial communication with P
SCL/CLK
pin 37
serial communication with P
RDSINT
pin 39
serial communication with P
RSTN
pin 45
reset pin driven by P
相关PDF资料
PDF描述
TDA7705 AUDIO/VIDEO DEMODULATOR, PQFP64
TDA7718NTR SPECIALTY CONSUMER CIRCUIT, PDSO28
TDA7718N SPECIALTY CONSUMER CIRCUIT, PDSO28
TDA7719 2 CHANNEL(S), TONE CONTROL CIRCUIT, PDSO28
TDA7719TR 2 CHANNEL(S), TONE CONTROL CIRCUIT, PDSO28
相关代理商/技术参数
参数描述
TDA7706 功能描述:调谐器 HD Radio Chipset Dual RF Front-End IC RoHS:否 制造商:NXP Semiconductors 功能: 噪声系数: 工作电源电压: 最小工作温度: 最大工作温度:
TDA7706CB 制造商:STMicroelectronics 功能描述:MID INFOTAINMENT - Trays
TDA7706M 制造商:STMicroelectronics 功能描述:SADA_Highly integrated tuner for AM/FM car-radio
TDA7716N 功能描述:双向可控硅 AID Car Radio LQFP 44 10x10x1 RoHS:否 制造商:STMicroelectronics 开启状态 RMS 电流 (It RMS):16 A 不重复通态电流:120 A 额定重复关闭状态电压 VDRM:600 V 关闭状态漏泄电流(在 VDRM IDRM 下):5 uA 开启状态电压: 保持电流(Ih 最大值):45 mA 栅触发电压 (Vgt):1.3 V 栅触发电流 (Igt):1.75 mA 最大工作温度: 安装风格:Through Hole 封装 / 箱体:TO-220AB
TDA7717 功能描述:音频放大器 3 Band Car Audio Processor RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel