参数资料
型号: TDA8395T/N2
厂商: NXP SEMICONDUCTORS
元件分类: 颜色信号转换
英文描述: COLOR SIGNAL DECODER, PDSO20
封装: SOT-163
文件页数: 2/12页
文件大小: 93K
代理商: TDA8395T/N2
October 1991
10
Philips Semiconductors
Preliminary specication
SECAM decoder
TDA8395
SOLDERING
Introduction
There is no soldering method that is ideal for all IC packages. Wave soldering is often preferred when through-hole and
surface mounted components are mixed on one printed-circuit board. However, wave soldering is not always suitable for
surface mounted ICs, or for printed-circuits with high population densities. In these situations reflow soldering is often
used.
This text gives a very brief insight to a complex technology. A more in-depth account of soldering ICs can be found in our
“IC Package Databook” (order code 9398 652 90011).
Soldering by dipping or by wave
The maximum permissible temperature of the solder is 260
°C; solder at this temperature must not be in contact with the
joint for more than 5 seconds. The total contact time of successive solder waves must not exceed 5 seconds.
The device may be mounted up to the seating plane, but the temperature of the plastic body must not exceed the
specified maximum storage temperature (Tstg max). If the printed-circuit board has been pre-heated, forced cooling may
be necessary immediately after soldering to keep the temperature within the permissible limit.
Repairing soldered joints
Apply a low voltage soldering iron (less than 24 V) to the lead(s) of the package, below the seating plane or not more
than 2 mm above it. If the temperature of the soldering iron bit is less than 300
°C it may remain in contact for up to
10 seconds. If the bit temperature is between 300 and 400
°C, contact may be up to 5 seconds.
DEFINITIONS
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
Data sheet status
Objective specication
This data sheet contains target or goal specications for product development.
Preliminary specication
This data sheet contains preliminary data; supplementary data may be published later.
Product specication
This data sheet contains nal product specications.
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specication
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specication.
相关PDF资料
PDF描述
TDA8395T/N3 COLOR SIGNAL DECODER, PDSO20
TDA8395TD-T COLOR SIGNAL DECODER, PDSO20
TDA8395TD COLOR SIGNAL DECODER, PDSO20
TDA5737M/C1 2-BAND, VIDEO TUNER, PDSO24
TDA8395T/N3,112 COLOR SIGNAL DECODER, PDSO20
相关代理商/技术参数
参数描述
TDA8405 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:TV AND VTR STEREO/DUAL SOUND PROCESSOR WITH I2C BUS CONTROL
TDA8415 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:TV and VTR stereo/dual sound processor with integrated filters and I2C-bus control
TDA8416 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:TV and VTR stereo/dual sound processor with integrated filters and I2C-bus control
TDA8417 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:TV and VTR stereo/dual sound processor with integrated filters and I2C-bus control
TDA8421 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Hi-fi stereo audio processor; I2C bus