- 您现在的位置：买卖IC网 > PDF目录85416 > TDA8775GB-T (NXP SEMICONDUCTORS) TRIPLE, PARALLEL, WORD INPUT LOADING, 0.01 us SETTLING TIME, 10-BIT DAC, PQFP48 PDF资料下载
参数资料
| 型号： | TDA8775GB-T |
| 厂商： | NXP SEMICONDUCTORS |
| 元件分类： | DAC |
| 英文描述： | TRIPLE, PARALLEL, WORD INPUT LOADING, 0.01 us SETTLING TIME, 10-BIT DAC, PQFP48 |
| 封装： | PLASTIC, LQFP-48 |
| 文件页数： | 6/18页 |
| 文件大小： | 158K |
| 代理商： | TDA8775GB-T |
1996 Aug 14
14
Philips Semiconductors
Preliminary specication
Triple 10-bit video Digital-to-Analog
Converter (DAC)
TDA8775
SOLDERING
Introduction
There is no soldering method that is ideal for all IC
packages. Wave soldering is often preferred when
through-hole and surface mounted components are mixed
on one printed-circuit board. However, wave soldering is
not always suitable for surface mounted ICs, or for
printed-circuits with high population densities. In these
situations reflow soldering is often used.
This text gives a very brief insight to a complex technology.
A more in-depth account of soldering ICs can be found in
our
“IC Package Databook” (order code 9398 652 90011).
Reow soldering
Reflow soldering techniques are suitable for all LQFP
packages.
Reflow soldering requires solder paste (a suspension of
fine solder particles, flux and binding agent) to be applied
to the printed-circuit board by screen printing, stencilling or
pressure-syringe dispensing before package placement.
Several techniques exist for reflowing; for example,
thermal conduction by heated belt. Dwell times vary
between 50 and 300 seconds depending on heating
method. Typical reflow temperatures range from
215 to 250
°C.
Preheating is necessary to dry the paste and evaporate
the binding agent. Preheating duration: 45 minutes at
45
°C.
Wave soldering
Wave soldering is not recommended for LQFP packages.
This is because of the likelihood of solder bridging due to
closely-spaced leads and the possibility of incomplete
solder penetration in multi-lead devices.
If wave soldering cannot be avoided, the following
conditions must be observed:
A double-wave (a turbulent wave with high upward
pressure followed by a smooth laminar wave)
soldering technique should be used.
The footprint must be at an angle of 45° to the board
direction and must incorporate solder thieves
downstream and at the side corners.
Even with these conditions, do not consider wave
soldering LQFP packages LQFP48 (SOT313-2),
LQFP64 (SOT314-2) or LQFP80 (SOT315-1).
During placement and before soldering, the package must
be fixed with a droplet of adhesive. The adhesive can be
applied by screen printing, pin transfer or syringe
dispensing. The package can be soldered after the
adhesive is cured.
Maximum permissible solder temperature is 260
°C, and
maximum duration of package immersion in solder is
10 seconds, if cooled to less than 150
°C within
6 seconds. Typical dwell time is 4 seconds at 250
°C.
A mildly-activated flux will eliminate the need for removal
of corrosive residues in most applications.
Repairing soldered joints
Fix the component by first soldering two diagonally-
opposite end leads. Use only a low voltage soldering iron
(less than 24 V) applied to the flat part of the lead. Contact
time must be limited to 10 seconds at up to 300
°C. When
using a dedicated tool, all other leads can be soldered in
one operation within 2 to 5 seconds between
270 and 320
°C.
相关PDF资料 |
PDF描述 |
|---|---|
| TDA8706AMDB | 3-CH 6-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO24 |
| TDA8764AHL/6/C1 | 1-CH 10-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PQFP32 |
| TDA8764ATS/6/C1 | 1-CH 10-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO28 |
| TDA8775GB-S | TRIPLE, PARALLEL, WORD INPUT LOADING, 0.01 us SETTLING TIME, 10-BIT DAC, PQFP48 |
| TDA8775G/C1,151 | TRIPLE, PARALLEL, WORD INPUT LOADING, 0.01 us SETTLING TIME, 10-BIT DAC, PQFP48 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TDA8776 | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:10-bit, 500 Msps Digital-to-Analog Converter DAC |
| TDA8776A | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:10-bit, 1000 Msps Digital-to-Analog Converter DAC |
| TDA8776AK | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:10-bit, 1000 Msps Digital-to-Analog Converter DAC |
| TDA8776AKA-T | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Video DAC without Color Palette |
| TDA8776K | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:10-bit, 500 Msps Digital-to-Analog Converter DAC |
发布紧急采购，3分钟左右您将得到回复。