参数资料
型号: TDA9886TS/V3
厂商: NXP SEMICONDUCTORS
元件分类: 接收器
英文描述: AM/FM, AUDIO/VIDEO DEMODULATOR, PDSO24
封装: 5.30 MM, PLASTIC, MO-150, SOT-340-1, SSOP-24
文件页数: 49/56页
文件大小: 248K
代理商: TDA9886TS/V3
2003 Oct 02
53
Philips Semiconductors
Product specication
I2C-bus controlled single and multistandard
alignment-free IF-PLL demodulators
TDA9885; TDA9886
15.5
Suitability of surface mount IC packages for wave and reow soldering methods
Notes
1. For more detailed information on the BGA packages refer to the
“(LF)BGA Application Note” (AN01026); order a copy
from your Philips Semiconductors sales office.
2. All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the maximum
temperature (with respect to time) and body size of the package, there is a risk that internal or external package
cracks may occur due to vaporization of the moisture in them (the so called popcorn effect). For details, refer to the
Drypack information in the
“Data Handbook IC26; Integrated Circuit Packages; Section: Packing Methods”.
3. These transparent plastic packages are extremely sensitive to reflow soldering conditions and must on no account
be processed through more than one soldering cycle or subjected to infrared reflow soldering with peak temperature
exceeding 217
°C ± 10 °C measured in the atmosphere of the reflow oven. The package body peak temperature
must be kept as low as possible.
4. These packages are not suitable for wave soldering. On versions with the heatsink on the bottom side, the solder
cannot penetrate between the printed-circuit board and the heatsink. On versions with the heatsink on the top side,
the solder might be deposited on the heatsink surface.
5. If wave soldering is considered, then the package must be placed at a 45
° angle to the solder wave direction.
The package footprint must incorporate solder thieves downstream and at the side corners.
6. Wave soldering is suitable for LQFP, TQFP and QFP packages with a pitch (e) larger than 0.8 mm; it is definitely not
suitable for packages with a pitch (e) equal to or smaller than 0.65 mm.
7. Wave soldering is suitable for SSOP, TSSOP, VSO and VSSOP packages with a pitch (e) equal to or larger than
0.65 mm; it is definitely not suitable for packages with a pitch (e) equal to or smaller than 0.5 mm.
8. Hot bar or manual soldering is suitable for PMFP packages.
PACKAGE(1)
SOLDERING METHOD
WAVE
REFLOW(2)
BGA, LBGA, LFBGA, SQFP, SSOP-T(3), TFBGA, VFBGA
not suitable
suitable
DHVQFN, HBCC, HBGA, HLQFP, HSQFP, HSOP, HTQFP,
HTSSOP, HVQFN, HVSON, SMS
not suitable(4)
suitable
PLCC(5), SO, SOJ
suitable
LQFP, QFP, TQFP
not recommended(5)(6)
suitable
SSOP, TSSOP, VSO, VSSOP
not recommended(7)
suitable
PMFP(8)
not suitable
相关PDF资料
PDF描述
TDA9887TS/V3 AM/FM, AUDIO/VIDEO DEMODULATOR, PDSO24
TDA9889TS/V1,512 SPECIALTY CONSUMER CIRCUIT, PDSO16
TDA9889TS/V1,518 SPECIALTY CONSUMER CIRCUIT, PDSO16
TDA9898HL/V3 SPECIALTY CONSUMER CIRCUIT, PQFP48
TDA9898HN/V3 SPECIALTY CONSUMER CIRCUIT, PQCC48
相关代理商/技术参数
参数描述
TDA9887 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:I2C-bus controlled multistandard alignment-free IF-PLL demodulator with FM radio
TDA9887HN/V4 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:I2C-bus controlled multistandard alignment-free IF-PLL demodulator with FM radio
TDA9887HN/V4,518 功能描述:射频接收器 DEMODULATOR VIF AND RoHS:否 制造商:Skyworks Solutions, Inc. 类型:GPS Receiver 封装 / 箱体:QFN-24 工作频率:4.092 MHz 工作电源电压:3.3 V 封装:Reel
TDA9887HN/V4-T 功能描述:射频接收器 DEMODULATOR VIF AND SIF RoHS:否 制造商:Skyworks Solutions, Inc. 类型:GPS Receiver 封装 / 箱体:QFN-24 工作频率:4.092 MHz 工作电源电压:3.3 V 封装:Reel
TDA9887T/V4 功能描述:射频接收器 DEMODULATOR VIF AND SIF RoHS:否 制造商:Skyworks Solutions, Inc. 类型:GPS Receiver 封装 / 箱体:QFN-24 工作频率:4.092 MHz 工作电源电压:3.3 V 封装:Reel