参数资料
| 型号： | TDGL005 |
| 厂商： | Microchip Technology |
| 文件页数： | 3/15页 |
| 文件大小： | 0K |
| 描述： | BOARD BASIC I/O SHIELD CHIPKIT |
| 设计资源： | ChipKIT Basic I/O Shield Schematics |
| 标准包装： | 1 |
| 主要目的： | 接口，I/O 屏蔽 |
| 嵌入式： | 否 |
| 主要属性： | 4 个开关，4 个按钮，8 个 LED，OLED 显示器 |
| 已供物品： | 板 |
chipKIT Basic I/O Shield Reference Manual
4) J3 – Analog Signal Connector
Pin 1 (analog signal A0) is connected to a potentiometer. Pins 5 and 6 (labeled as A4 and
A5) provide access to the I 2 C signals SDA and SCL for the I 2 C bus. The I 2 C bus is used to
access the temperature sensor and the EEPROM and for the I 2 C daisy chain connector.
Note: On the Uno32 it is necessary to set jumpers JP6 & JP7 to the correct position for
accessing the I 2 C signals on that board. On the Max32 board, it is necessary to use jumper
wires to bring the I 2 C signals onto the board, as the connector providing the I 2 C bus on the
Max32 board doesn’t contact the Basic I/O Shield.
5) Discrete LEDs
Eight LEDs that provide discrete digital outputs. These can be accessed individually using
the digitalWrite function. The LEDs are connected to the low eight bits of microcontroller
PORTE and all eight can be written at the same time by writing to PORTE.
6) IC2 – Temperature Sensor
This is a Microchip TCN75A digital temperature sensor. It is accessed via the I 2 C bus.
7) JP2/JP3 – I 2 C Pull-up Resistor Enable Jumpers
These jumpers are used to enable or disable the presence of the I 2 C pull-up resistors on
the I 2 C bus. Having the shorting blocks installed enables the resistors. Removing the
shorting blocks disables them.
8) J11 – I 2 C Daisy Chain Connector
This is a 2x4 pin header connector that provides access to the I 2 C signals SDA and SCL
as well as power from the 3.3V power bus and ground. This can be used to extend the I 2 C
bus off of the board and to power external I 2 C device. Digilent has cables and a selection
of I 2 C peripheral modules that can be accessed using this connector.
9) Potentiometer
This is a 10K ohm potentiometer connected across VCC3V3 and ground. It provides an
analog input voltage to analog input A0.
10) J1 and J2 – Digital Signal Connectors
These connectors bring digital signals from the chipKIT microcontroller board onto the
Basic I/O Shield board.
11) Organic LED Graphic Display
This is a 128x32 pixel monochrome OLED graphic display panel. This display panel is
accessed using the SPI interface.
12) J9 & J10 – Digital I/O Signal Connectors
These are screw terminal connectors that provide access to digital I/O signals 3, 5, 6, and
9. These are four of the PWM signals from the chipKIT microcontroller board.
13) J6 – Open Drain FET Power Connector
This provides access to the power connections for the open drain FETs.
14) , J7, & J8 – Open Drain FET Output
These provide access to the outputs of the open drain FETs.
www.digilentinc.com
page 3 of 15
Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trademarks of their respective owners.
相关PDF资料 |
PDF描述 |
|---|---|
| TDGL007 | BOARD MOTOR CTRL DSPIC337128MC |
| TEACL-PIC-DB | ADAPTER DEBUG TEACLIPPER/PICICD2 |
| TEACL-STAMP-DB | ADAPTER DEBUG TEACLIPPER/STAMP |
| TEH-9P | CONN DB9 PLUG IDC PLASTIC |
| TEH-9S | CONN DB9 SOCKET IDC PLASTIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TDGL006 | 功能描述:界面开发工具 chipKIT Network Shield RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V |
| TDGL007 | 功能描述:开发板和工具包 - PIC / DSPIC DIGILENT CEREBOT MC7 MOTOR CONTROL BRD RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压: |
| TDGL008 | 功能描述:开发板和工具包 - PIC / DSPIC Digilent Cerebot MX3ck Dev Brd RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压: |
| TDGL009 | 功能描述:开发板和工具包 - PIC / DSPIC Digilent Cerebot MX4cK Dev Brd RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压: |
| TDGL010 | 功能描述:开发板和工具包 - 其他处理器 Digilent Cerebot MX7cK Dev Brd RoHS:否 制造商:Freescale Semiconductor 产品:Development Systems 工具用于评估:P3041 核心:e500mc 接口类型:I2C, SPI, USB 工作电源电压: |
发布紧急采购，3分钟左右您将得到回复。