收藏本站
参数资料
型号： TFML-115-02-LM-D
厂商： SAMTEC INC
元件分类： 电路板相叠连接器
英文描述： 30 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SURFACE MOUNT
文件页数： 1/4页
文件大小： 490K
代理商： TFML-115-02-LM-D
2 MAX TOE
(TYP)
TFML-1XX-XX-XXX-D-XXX
No OF POSITIONS
-05,-07,-10 THRU -50
(PER ROW)
ROW SPECIFICATION
-D: DOUBLE ROW
LEAD STYLE
-01: THROUGH HOLE
(SEE FIG. 1)
-02: SURFACE MOUNT
(SEE FIG.3, SHT 2)
PLATING SPECIFICATION
-S: SELECTIVE (USE T-1R16-XX-S-X)
-L: LIGHT SELECTIVE (USE T-1R16-XX-L-X)
-F: FLASH GOLD (USE T-1R16-XX-F-X)
-P: GOLD FLASH PALLADIUM NICKEL
(USE T-1R16-XX-P-X)
-H: HEAVY GOLD (USE T-1R16-XX-H-X)
-FM: SELECTIVE FLASH GOLD, MATTE TIN TAIL
(USE T-1R16-XX-F-X)
-LM: SELECTIVE LIGHT GOLD, MATTE TIN TAIL
(USE T-1R16-XX-L-X)
-SM: SELECTIVE HEAVY GOLD, MATTE TIN TAIL
(USE T-1R16-XX-S-X)
OPTION
-A: ALIGNMENT PIN (USE TFML-XX-D-01-A)
(SEE FIG. 7, SHT 3)
-LC: LOCKING CLIP (USE LC-05-TM) SEE NOTE 12
(SEE FIG. 9, SHT 3, N/A ON -RA OPTION)
-P: PICK & PLACE PAD (USE PPP-04)
(AVAIL IN ALL POSITIONS, N/A
ON -RA OPTION, SEE FIG. 5, SHT 2)
-RA: RIGHT ANGLE (LEAD STYLE -01 ONLY)
(SEE FIG. 4, SHT 2)
-TR: TAPE & REEL
(SEE FIG. 2)(N/A ON -01 LEAD STYLE)
-SA: STAKED ALIGNMENT PIN (USE SM-A5)
(SEE FIG. 8, SHT 3)
-K: POLYAMIDE FILM (USE K-500-300)
(SEE FIG. 6, SHT 2) (N/A ON -RA)
-SN: SOLDER NAIL (USE TFML-XX-D-01-SN &
WT-27-01-T) (SEE FIG. 10, SHEET 4)
(AVAILABLE ON -02 LEAD STYLE ONLY)
-SN2: SOLDER NAIL FOR .093 BOARD
(USE TFML-XX-D-01-SN &
WT-27-02-T) (SEE FIG. 10, SHEET 4)
(AVAILABLE ON -02 LEAD STYLE ONLY)
(NOT AVAILABLE WITH -A, -LC, - RA, -SA)
.155 3.94
REF
.225 5.72
REF
.130
REF
3.30
.075
REF
1.91
.110
REF
2.79
(SEE NOTE 11)
(No OF POS x .050[1.27]) + .025[0.64] REF
(No OF POS x .050[1.27]) + .125[3.18] REF
.150
REF
3.81
"A" REF (TYP)
(SEE NOTE 7 & TABLE 1)
"B"
"A"
TFML-XX-D-01-X
02
01
PART NOTCH
OBLONG HOLES
ROUND HOLES
PAD NOTCH
.4270 10.846
IN-PROCESS
.096
REF
2.44
.1635 4.153
REF
.010
REF
0.25
.130
REF
3.30
.050 1.27
2 MAX TOE
(TYP)
SECTION "B"-"B"
C3
.220 5.59
REF
.014
REF
0.36
.134
REF
3.39
.075 1.91
(SEE NOTE 9)
.018 0.46
REF
(No OF POS -1) x .050[1.27]
2 MAX SWAY
(TYP)
2 MAX SWAY
(TYP)
SECTION "A"-"A"
C4
T-1R16-01-XXX-2
C2
C
FIG. 1
-01: THROUGH HOLE
USER DIRECTION OF UNREELING
FIG. 2
-TR: TAPE & REEL OPTION
C1
AQ
TABLE 1
NO OF POS.
"A"
EVEN
.310
ODD (EXCL. -05,-07 POS)
.360
-05,-07
.113
SHEET
OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
ANGLES
.XX: .01
2
.XXX: .005
.XXXX: .0020
MATERIAL:
.050 SHROUDED TERMINAL ASSEMBLY
BY:
TFML-1XX-XX-XXX-D-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
DEANP
4/8/99
4
1
SHEET SCALE: 1.75:1
VECTRA E130i, COLOR: BLACK
c:\enterprisevault\DWG\MISC\MKTG\TFML-1XX-XX-XXX-D-XXX-MKT.SLDDRW
NOTES:
1.
REPRESENTS A CRITICAL DIMENSION.
2. COPLANARITY: POSITIONS -10 THRU -26: .004[0.10]
POSITIONS -27 THRU -50: .006[0.15].
3. MANUFACTURING IN-PROCESS DIMENSION
DESIGNED TO ACHIEVE FINISHED ASSEMBLY.
4. MINIMUM PUSHOUT FORCE: 1.0 LB [4.4 N].
5. MAXIMUM ALLOWABLE BOW: .004 INCH/INCH
[0.10 MM/MM]AFTER ASSEMBLY.
6. MEASURED FROM BEND.
7. POSITIONS -05 AND -07 WILL ONLY HAVE ONE CLIP AT
DIMENSION SHOWN; POSITIONS -10 THROUGH -24
WILL HAVE ONLY ONE CLIP AT DIMENSION SHOWN;
POSITIONS -25 THROUGH -34 WILL HAVE TWO CLIPS AT
DIMENSION SHOWN; POSITIONS -35 THROUGH -50 WILL
HAVE THREE; CLIPS: TWO AT DIMENSION SHOWN & ONE
CENTERED ON INSULATOR.
8. NOTE DELETED.
9. .003[0.08] MAXIMUM TERMINAL BURR
10. .005[0.13] MAXIMUM HEIGHT VARIATION BETWEEN ANY TWO PINS.
11. DIMENSION IS NOT APPLICABLE FOR -05 AND -07 POSITION.
12. DUE TO THE HIGH AMOUNT OF INSERTION FORCE
NEEDED, THE –LC OPTION IS NOT COMPATIBLE
WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH
THE –LC OPTION.
CONTACT: PHOS BRONZE, THICKNESS: .018
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
REVISION AQ
相关PDF资料
PDF描述
TFML-115-02-P-D 30 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SURFACE MOUNT
TFML-115-02-SM-D 30 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SURFACE MOUNT
TFML-145-01-F-D 90 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER
TFML-145-01-FM-D 90 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER
TFML-145-01-H-D 90 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER
相关代理商/技术参数
参数描述
TFML-115-02-S-D 功能描述:CONN HEADER .05" 30POS DUAL SMD RoHS:是 类别:连接器，互连式 >> 矩形- 接头，公引脚 系列:Tiger Eye™ TFML 产品目录绘图:PEC,PBC Series Dual Side PEC,PBC Series Dual Top PEC,PBC Series Straight Front 标准包装:1 系列:- 触点类型：:公形引脚 连接器类型:接头，无罩，可断开式 位置数:30 加载位置的数目:全部 间距:0.100"（2.54mm） 行数:2 行间距:0.100"（2.54mm） 触点接合长度:0.318"（8.08mm） 安装类型:通孔 端子:焊接 紧固型:- 特点:- 触点表面涂层:锡 触点涂层厚度:100µin（2.54µm） 颜色:黑 包装:散装 产品目录页面:179 (CN2011-ZH PDF) 配套产品:S7118-ND - CONN HEADER FMAL 30PS.1" DL GOLDS7083-ND - CONN HEADER FMAL 30PS .1" DL TINS5724-ND - CONN FMALE 30POS DL .1" GOLD SMDS5685-ND - CONN FEMALE 30POS DL .1" TIN SMDS5568-ND - CONN FMALE 30POS DL .1" R/A GOLDS5529-ND - CONN FEMALE 30POS DL .1" R/A TINS4623-ND - CONN FMALE 30POS DL .1" GOLD SMDS4584-ND - CONN FEMALE 30POS DL .1" TIN SMDS4467-ND - CONN FMALE 30POS DL .1" R/A GOLDS4428-ND - CONN FEMALE 30POS DL .1" R/A TIN更多... 其它名称:S2212E-15
TFML-115-02-S-D-A 制造商:Samtec Inc 功能描述:CONN SHRD HDR HDR 30 POS 1.27MM SLDR ST SMD - Bulk 制造商:Samtec Inc 功能描述:HEADER, 1.27MM, SMT, 2X15WAY 制造商:Samtec Inc 功能描述:HEADER, 1.27MM, SMT, 2X15POS; Connector Type:Board to Board; Series:TFML; Contact Termination:Surface Mount Vertical; Gender:Header; No. of Contacts:30; No. of Rows:2; Pitch Spacing:1.27mm; Contact Plating:Gold ;RoHS Compliant: Yes
TFML-115-02-S-D-A-K 制造商:Samtec Inc 功能描述:CONN SHRD HDR HDR 30 POS 1.27MM SLDR ST SMD - Bulk
TFML-115-02-S-D-A-K-TR 制造商:Samtec Inc 功能描述:CONN SHRD HDR HDR 30 POS 1.27MM SLDR ST SMD - Tape and Reel
TFML-115-02-S-D-A-P 制造商:Samtec Inc 功能描述:CONN SHRD HDR HDR 30 POS 1.27MM SLDR ST SMD - Bulk 制造商:Samtec 功能描述:Conn Shrouded Header HDR 30 POS 1.27mm Solder ST SMD Tube
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*