- 您现在的位置：买卖IC网 > PDF目录98217 > THS1031CPW (TEXAS INSTRUMENTS INC) 1-CH 10-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO28 PDF资料下载
参数资料
| 型号： | THS1031CPW |
| 厂商： | TEXAS INSTRUMENTS INC |
| 元件分类： | ADC |
| 英文描述： | 1-CH 10-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO28 |
| 封装： | GREEN, PLASTIC, TSSOP-28 |
| 文件页数： | 17/41页 |
| 文件大小： | 728K |
| 代理商： | THS1031CPW |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页当前第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页
THS1031
3-V TO 5.5-V, 10-BIT, 30 MSPS
CMOS ANALOG-TO-DIGITAL CONVERTER
SLAS242E – NOVEMBER 1999 – REVISED MARCH 2002
24
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
PRINCIPLES OF OPERATION
operating configuration examples (continued)
Figure 27 shows an example of top/bottom mode operation on an input span of 800 mV with mid-scale value
1.5 V. Pin REFTS is set to 2.5 V and pin REFBS to 0.5 V, making their average value equal to the mid-scale
value of AIN and giving the maximum specified difference of 2 V between REFTS and REFBS to maximize the
full-scale range of the ADC core for best resolution. The PGA gain then has to be set to 2.5, to amplify the
800 mVPP input signal to 2 VPP at the ADC core input.
AIN
REFTS
REFBS
REFTF
REFBF
MODE
AVDD
1.9 V
1.1 V
0.1
F
10
F
0.1
F
0.1
F
1.5 V
DC SOURCE = 2.5 V
DC SOURCE = 0.5 V
REFSENSE
Figure 27. Top/Bottom Mode, PGA Gain 2.5
clamp operation
10-Bit
DAC
_
+
CLAMPIN
CLAMP
AIN
RIN
CIN
V(Clamp)
Control Register (Bit CLINT)
S/H
VIN
SW1
Figure 28. Schematic of Clamp Circuitry
The THS1031 provides a clamp function for restoring a dc reference level to the signal at AIN which has been
lost through ac-coupling from the signal source to this pin.
Figure 29 shows an example of using the clamp to restore the black level of a composite video input ac coupled
to AIN. While the clamp pin is held high, the clamp amplifier forces the voltage at AIN to equal the clamp
reference voltage, setting the dc voltage at AIN for the video black level.
After power up, the clamp reference voltage is the voltage on the CLAMPIN pin. This reference can instead be
taken from the internal CLAMP DAC by suitably programming the THS1031 clamp and control registers.
Clamp acquisition and clamp droop design calculations are discussed later.
相关PDF资料 |
PDF描述 |
|---|---|
| THS1031CDW | 1-CH 10-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO28 |
| THS1031IDWR | 1-CH 10-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO28 |
| THS1031IDWG4 | 1-CH 10-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO28 |
| THS1031CDWG4 | 1-CH 10-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO28 |
| THS1031CPWG4 | 1-CH 10-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO28 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| THS1031CPWG4 | 功能描述:模数转换器 - ADC 10-Bit 30 MSPS 1-Ch RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| THS1031CPWR | 功能描述:模数转换器 - ADC 10-Bit 30 MSPS 1-Ch RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| THS1031CPWRG4 | 功能描述:模数转换器 - ADC 10-Bit 30 MSPS 1-Ch RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| THS1031EVM | 功能描述:数据转换 IC 开发工具 THS1031 Eval Mod RoHS:否 制造商:Texas Instruments 产品:Demonstration Kits 类型:ADC 工具用于评估:ADS130E08 接口类型:SPI 工作电源电压:- 6 V to + 6 V |
| THS1031IDW | 功能描述:模数转换器 - ADC _ RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
发布紧急采购，3分钟左右您将得到回复。