参数资料
型号: THS1206CDA
厂商: TEXAS INSTRUMENTS INC
元件分类: ADC
英文描述: 4-CH 12-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO32
封装: GREEN, PLASTIC, TSSOP-32
文件页数: 9/43页
文件大小: 722K
代理商: THS1206CDA
THS1206
SLAS217H – MAY 1999 – REVISED JULY 2003#
www.ti.com
17
Table 2 shows the maximum conversion rate in the single conversion mode.
Table 2. Maximum Conversion Rate in Single Conversion Mode(1)
CHANNEL CONFIGURATION
NUMBER OF
CHANNELS
MAXIMUM CONVERSION
RATE PER CHANNEL
1 single-ended channel
1
3 MSPS
2 single-ended channels
2
2 MSPS
3 single-ended channels
3
1.5 MSPS
4 single-ended channels
4
1.2 MSPS
1 differential channel
1
3 MSPS
2 differential channels
2
2 MSPS
1 single-ended and 1 differential channel
2
2 MSPS
2 single-ended and 1 differential channels
3
1.5 MSPS
(1) Maximum conversion rate with respect to the typical internal oscillator speed (i.e.: 6 MSPS * (tc/t2).
SINGLE CONVERSION MODE
In single conversion mode, a single conversion of the selected analog input channels is performed. The single conversion
mode is selected by setting bit 1 of control register 0 to 1.
A single conversion is initiated by pulsing the CONVST input. On the falling edge of CONVST, the sample and hold stages
of the selected analog inputs are placed into hold simultaneously, and the conversion sequence for the selected channels
is started.
The conversion clock in single conversion mode is generated internally using a clock oscillator circuit. The signal DATA_AV
(data available) becomes active when the trigger level is reached and indicates that the converted sample(s) is (are) written
into the FIFO and can be read out. The trigger level in the single conversion mode can be selected according to Table 13.
Figure 1 shows the timing of the single conversion mode. In this mode, up to four analog input channels can be selected
to be sampled simultaneously (see Table 2).
CONVST
AIN
Sample N
t1
td(A)
t2
tDATA_AV
DATA_AV,
Trigger Level = 1
Figure 24. Timing of Single Conversion Mode
The time (t2) between consecutive starts of single conversions is dependent on the number of selected analog input
channels. The time tDATA_AV, until DATA_AV becomes active is given by: tDATA_AV = tpipe + n × tc. This equation is valid for
a trigger level which is equivalent to the number of selected analog input channels. For all other trigger level conditions refer
to the timing specifications of single conversion mode.
相关PDF资料
PDF描述
THS1206QDAR 4-CH 12-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO32
THS1206MDAREP 4-CH 12-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO32
THS1206MDA 4-CH 12-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO32
THS1207CDA 4-CH 12-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO32
THS1207IDA 4-CH 12-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO32
相关代理商/技术参数
参数描述
THS1206CDA 制造商:Texas Instruments 功能描述:12BIT ADC 6MSPS CMOS SMD 1206 制造商:Texas Instruments 功能描述:12BIT ADC, 6MSPS CMOS, SMD, 1206 制造商:Texas Instruments 功能描述:12BIT ADC, 6MSPS CMOS, SMD, 1206; Resolution (Bits):12bit; Sampling Rate:6MSPS; Supply Voltage Type:Single; Supply Voltage Min:4.75V; Supply Voltage Max:5.25V; Supply Current:36mA; Digital IC Case Style:TSSOP; No. of Pins:32; Input ;RoHS Compliant: Yes
THS1206CDA 制造商:Texas Instruments 功能描述:12 bit simultaneous sampling analog/digi
THS1206CDAG4 功能描述:模数转换器 - ADC 12-Bit 6 MSPS Quad Channel RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32
THS1206CDAR 功能描述:模数转换器 - ADC 12-Bit 6 MSPS Quad Channel RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32
THS1206CDARG4 功能描述:模数转换器 - ADC 12-Bit 6 MSPS Quad Channel RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32