参数资料
型号: THS1207IDA
厂商: TEXAS INSTRUMENTS INC
元件分类: ADC
英文描述: 4-CH 12-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO32
封装: GREEN, PLASTIC, TSSOP-32
文件页数: 7/32页
文件大小: 317K
代理商: THS1207IDA
THS1207
SLAS284A – AUGUST 2000 – REVISED DECEMBER 2002
www.ti.com
15
To provide the system with channel information, the THS1207 utilizes an active low SYNC signal. When
operated in a multichannel configuration, the SYNC signal is active low when data from channel one is available
to the databus. When operated in single-channel mode (single-ended or differential operation) the SYNC signal
is disabled.
Figure 26 shows the timing of the conversion when one analog input channel is selected. The maximum
throughput rate is 6 MSPS in this mode. There is a certain timing relationship required for the read signal with
respect to the conversion clock. This can be seen in Figure 26 and in the read and SYNC timing table. A more
detailed description of the timing is given in the timing section and signal description of the THS1207.
Sample N
Channel 1
Sample N+2
Channel 1
Sample N+3
Channel 1
Sample N+1
Channel 1
Sample N+4
Channel 1
Sample N+5
Channel 1
Sample N+6
Channel 1
Data N–1
Channel 1
Data N
Channel 1
Data N+1
Channel 1
Data N+2
Channel 1
Data N–4
Channel 1
Data N–3
Channel 1
Data N–2
Channel 1
AIN
CONV_CLK
READ
READ is the logical combination from CS0, CS1 and RD
td(A)
td(pipe)
tw(CONV_CLKH)
tw(CONV_CLKL)
tc
tsu(CONV_CLKL-READL)
tsu(READH-CONV_CLKL)
Figure 26. Conversion Timing in 1-Channel Operation
Figure 27 shows the conversion timing when 2 analog input channels are selected. The maximum throughput
rate per channel is 3 MSPS in this mode. The data flow in the bottom of the figure shows in which order the
converted data is available to the databus. The signal SYNC is active low when data of channel one is available
to the databus. The data of channel one is followed by the data of channel two before channel one is again
available and the SYNC signal is active low.
Sample N
Channel 1, 2
Sample N+1
Channel 1, 2
Sample N+2
Channel 1, 2
Sample N+3
Channel 1, 2
Data N–1
Channel 2
Data N
Channel 1
Data N
Channel 2
Data N+1
Channel 1
Data N–2
Channel 1
Data N–2
Channel 2
Data N–1
Channel 1
AIN
CONV_CLK
READ
READ is the logical combination from CS0, CS1 and RD
SYNC
td(A)
td(pipe)
tw(CONV_CLKH)
tw(CONV_CLKL)
tc
tsu(CONV_CLKL-READL)
tsu(READH-CONV_CLKL)
td(CONV_CLKL-SYNCL)
td(CONV_CLKL-SYNCH)
Figure 27. Conversion Timing in 2-Channel Operation
相关PDF资料
PDF描述
THS1207CDAR 4-CH 12-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO32
THS1207IDAR 4-CH 12-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO32
THS1207IDAG4 4-CH 12-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO32
THS1207CDAG4 4-CH 12-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO32
THS1209CDAR 2-CH 12-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO32
相关代理商/技术参数
参数描述
THS1207IDAG4 功能描述:模数转换器 - ADC 12-Bit 6MSPS Simult Sampling Quad Ch RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32
THS12082 制造商:TI 制造商全称:Texas Instruments 功能描述:12-BIT, 8 MSPS, SIMULTANEOUS SAMPLING ANALOG-TO-DIGITAL CONVERTERS
THS12082CDA 功能描述:模数转换器 - ADC 12bit 8 MSPS ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32
THS12082CDAG4 功能描述:模数转换器 - ADC 12 Bit 8 MSPS Dual Ch RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32
THS12082CDAR 功能描述:模数转换器 - ADC 12 Bit 8 MSPS Dual Ch RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32