参数资料
型号: TLC5540CNSR
厂商: TEXAS INSTRUMENTS INC
元件分类: ADC
英文描述: 1-CH 8-BIT FLASH METHOD ADC, PARALLEL ACCESS, PDSO24
封装: GREEN, PLASTIC, SOP-24
文件页数: 3/21页
文件大小: 407K
代理商: TLC5540CNSR
TLC5540
SLAS105D JANUARY 1995 REVISED APRIL 2004
www.ti.com
11
PRINCIPLES OF OPERATION
functional description
The TLC5540 uses a modified semiflash architecture as shown in the functional block diagram. The four most
significant bits (MSBs) of every output conversion result are produced by the upper comparator block CB1. The
four least significant bits (LSBs) of each alternate output conversion result are produced by the lower
comparator blocks CB-A and CB-B in turn (see Figure 12).
The reference voltage that is applied to the lower comparator resistor string is one sixteenth of the amplitude
of the refence applied to the upper comparator resistor string. The sampling comparators of the lower
comparator block require more time to sample the lower voltages of the reference and residual input voltage.
By applying the residual input voltage to alternate lower comparator blocks, each comparator block has twice
as much time to sample and convert as would be the case if only one lower comparator block were used.
VI(1)
VI(2)
VI(3)
VI(4)
CLK1
CLK2
CLK3
CLK4
S(1)
C(1)
S(2)
C(2)
S(3)
C(3)
S(4)
C(4)
S(1)
H(1)
C(1)
S(3)
H(3)
C(3)
H(0)
C(0)
S(2)
H(2)
C(2)
S(4)
H(4)
LD(2)
OUT(2)
OUT(1)
OUT(0)
OUT(1)
ANALOG IN
(Sampling Points)
CLK (Clock)
Upper Comparators Block (CB1)
Upper Data
Lower Reference Voltage
Lower Comparators Block (CB-A)
Lower Data (A)
Lower Comparators Block (CB-B)
Lower Data (B)
D1 D8 (Data Output)
UD(0)
RV(0)
UD(1)
RV(1)
UD(2)
RV(2)
UD(3)
RV(3)
LD(1)
LD(0)
LD(1)
LD(2)
tpd
Figure 12. Internal Functional Timing Diagram
This conversion scheme, which reduces the required sampling comparators by 30 percent compared to
standard semiflash architectures, achieves significantly higher sample rates than the conventional semiflash
conversion method.
相关PDF资料
PDF描述
TLC5540INSR 1-CH 8-BIT FLASH METHOD ADC, PARALLEL ACCESS, PDSO24
TLC5540IPW 1-CH 8-BIT FLASH METHOD ADC, PARALLEL ACCESS, PDSO24
TLC5540CPWR 1-CH 8-BIT FLASH METHOD ADC, PARALLEL ACCESS, PDSO24
TLC5540INSRG4 1-CH 8-BIT FLASH METHOD ADC, PARALLEL ACCESS, PDSO24
TLC5540IPWRG4 1-CH 8-BIT FLASH METHOD ADC, PARALLEL ACCESS, PDSO24
相关代理商/技术参数
参数描述
TLC5540CNSRG4 功能描述:模数转换器 - ADC 8-Bit 40 MSPS 1-Ch Internal S&H Lo Pwr RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32
TLC5540CPW 功能描述:模数转换器 - ADC 8-Bit 40 MSPS 1-Ch Internal S&H Lo Pwr RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32
TLC5540CPWG4 功能描述:模数转换器 - ADC 8-Bit 40 MSPS 1-Ch Internal S&H Lo Pwr RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32
TLC5540CPWR 功能描述:模数转换器 - ADC 8-Bit 40 MSPS 1-Ch Internal S&H Lo Pwr RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32
TLC5540CPWRG4 功能描述:模数转换器 - ADC 8-Bit 40 MSPS 1-Ch Internal S&H Lo Pwr RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32