- 您现在的位置：买卖IC网 > PDF目录67326 > TLC7226IDWRG4 (TEXAS INSTRUMENTS INC) PARALLEL, 8 BITS INPUT LOADING, 7 us SETTLING TIME, 8-BIT DAC, PDSO20 PDF资料下载
参数资料
| 型号： | TLC7226IDWRG4 |
| 厂商： | TEXAS INSTRUMENTS INC |
| 元件分类： | DAC |
| 英文描述： | PARALLEL, 8 BITS INPUT LOADING, 7 us SETTLING TIME, 8-BIT DAC, PDSO20 |
| 封装： | GREEN, PLASTIC, SOIC-20 |
| 文件页数： | 2/21页 |
| 文件大小： | 440K |
| 代理商： | TLC7226IDWRG4 |
TLC7226C, TLC7226I, TLC7226M
QUADRUPLE 8BIT DIGITALTOANALOG CONVERTERS
SLAS060F JANUARY 1995 REVISED APRIL 2009
10
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
PRINCIPLES OF OPERATION
linearity, offset, and gain error using single-ended power supplies
When an amplifier is operated from a single power supply, the voltage offset can still be either positive or
negative. With a positive offset, the output voltage changes on the first code change. With a negative offset the
output voltage may not change with the first code depending on the magnitude of the offset voltage.
The output amplifier, with a negative voltage offset, attempts to drive the output to a negative voltage. However,
because the most negative supply rail is ground, the output cannot be driven to a negative voltage.
So when the output offset voltage is negative, the output voltage remains at zero volts until the input code value
produces a sufficient output voltage to overcome the inherent negative offset voltage, resulting in a transfer
function shown in Figure 8.
DAC Code
Output
Voltage
0 V
Negative
Offset
Figure 8. Effect of Negative Offset (Single Power Supply)
This negative offset error, not the linearity error, produces the breakpoint. The transfer function would have
followed the dotted line if the output buffer could be driven to a negative voltage.
For a DAC, linearity is measured between zero input code (all inputs 0) and full scale code (all inputs 1) after
offset and full scale are adjusted out or accounted for in some way. However, single power supply operation does
not allow for adjustment when the offset is negative due to the breakpoint in the transfer function. So the linearity
in the unipolar mode is measured between full scale code and the lowest code which produces a positive output
voltage.
The code is calculated from the maximum specification for the negative offset.
相关PDF资料 |
PDF描述 |
|---|---|
| TLC7226INE4 | PARALLEL, 8 BITS INPUT LOADING, 7 us SETTLING TIME, 8-BIT DAC, PDIP20 |
| TLC7226IN | PARALLEL, 8 BITS INPUT LOADING, 7 us SETTLING TIME, 8-BIT DAC, PDIP20 |
| TLC7226CDWR | PARALLEL, 8 BITS INPUT LOADING, 7 us SETTLING TIME, 8-BIT DAC, PDSO20 |
| TLC7226CDWG4 | PARALLEL, 8 BITS INPUT LOADING, 7 us SETTLING TIME, 8-BIT DAC, PDSO20 |
| 5962-8780201RA | QUAD, PARALLEL, 8 BITS INPUT LOADING, 8-BIT DAC, CDIP20 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TLC7226IN | 功能描述:数模转换器- DAC Quad DAC 8bit RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| TLC7226IN | 制造商:Texas Instruments 功能描述:SEMICONDUCTOR ((NW)) |
| TLC7226INE4 | 功能描述:数模转换器- DAC Quad Parallel-In Sngl/Dual Sply RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| TLC7226M | 制造商:TI 制造商全称:Texas Instruments 功能描述:QUADRUPLE 8-BIT DIGITAL-TO-ANALOG CONVERTERS |
| TLC7226MFKB | 制造商:TI 制造商全称:Texas Instruments 功能描述:QUADRUPLE 8-BIT DIGITAL-TO-ANALOG CONVERTERS |
发布紧急采购，3分钟左右您将得到回复。