参数资料
型号: TLE6280GP
厂商: INFINEON TECHNOLOGIES AG
元件分类: 运动控制电子
英文描述: BRUSHLESS DC MOTOR CONTROLLER, PDSO36
封装: PLASTIC, SO-36
文件页数: 22/25页
文件大小: 357K
代理商: TLE6280GP
Datasheet TLE6280GP
6
2007-07-19
The size of the CBxx and CCP capacitors depends upon the gate charge of the Mosfet.
(See “output stages”). CCP is usually 6 times larger then CBxx.
Dead Time and Shoot through option.
In bridge applications it has to be assured that the external high-side and low-side Mosfets
are not “on” at the same time, such that the battery voltage is directly connected to GND.
This is usually assured by the integration of delays in a driver IC, generating a so-called
dead time between switching off the external Mosfet and switching on the other Mosfet of the
same half-bridge.
The dead times generated in the TLE6280GP are adjustable. The dead time generated by
the TLE6280GP can be varied from 100ns to 4s by connecting an external resistor from the
DT pin to GND. The dead time has to be long enough to avoid a short between battery and
GND, while the dead time should be as short as possible to reduce extra power dissipation
in the external Mosfets.
In addition to this adjustable delay, the TLE6280GP provides a locking mechanism, prevent-
ing both external Mosfets of one half-bridge from being switched on at the same time. This
functionality is called shoot through protection.
If the command to switch on both high and low-side switches in the same half-bridge is given
at the input pins, the command will be ignored. (See dead time diagrams, fig. 6-8)
This shoot through protection can be deactivated by setting the MFP-pin to 5V.
Short circuit protection / current limitation
The TLE6280GP provides a short circuit protection for the external Mosfets, by monitoring
the Drain-Source voltage of the external Mosfets. As soon as this voltage is higher than the
short circuit detection limit, the Gate-Source voltage of this Mosfet will be limited to twice the
voltage at the MFP-Pin, providing a current limitation.
The short circuit detection level is dependent upon the voltage of the MFP pin as well (see
diagrams).
After a delay of about 11s all external Mosfets will be switched off until the driver is reset by
the MFP pin. The error flag is set.
The Drain-Source voltage monitoring of the short circuit detection for certain external Mos-
fets is active as soon as the corresponding input is set to “on” and the dead time is expired.
This feature provides a 2-step switch-on behavior for each regular switching-on of a Mosfet.
Description of MFP pin (Multi functional pin)
The MFP pin has multiple tasks:
1) Reset the device.
2) Adjust the short circuit detection level of the external Mosfet and define the gate voltage
limitation for current limitation in case of short circuit
3) Deactivate the shoot-through protection
Fig 4. shows the internal structure of the MFP pin.
Condition of MFP pin
Function
0 – 1.1V
Disable the driver. All external Mosfets will be actively
switched off
2.5 – 4.0 V
Adjustable short circuit detection level combined with adjust-
able gate voltage limitation for current limitation. Shoot-
through protection is active.
> 4.5V
Shoot-through protection deactivated.
相关PDF资料
PDF描述
TLE6361G SWITCHING REGULATOR, 425 kHz SWITCHING FREQ-MAX, PDSO36
TLE6363G DUAL SWITCHING CONTROLLER, 115 kHz SWITCHING FREQ-MAX, PDSO14
TLE6365G SWITCHING REGULATOR, 115 kHz SWITCHING FREQ-MAX, PDSO8
TLE6387GV60 1 A SWITCHING CONTROLLER, 430 kHz SWITCHING FREQ-MAX, PDSO14
TLE6389-3GV50 2.3 A SWITCHING CONTROLLER, 420 kHz SWITCHING FREQ-MAX, PDSO14
相关代理商/技术参数
参数描述
TLE6280GPAUMA1 制造商:Infineon Technologies AG 功能描述:3-Phase Bridge Driver 36-Pin DSO T/R 制造商:Infineon Technologies AG 功能描述:DRIVER_IC - Tape and Reel
TLE6280GPAUMA2 制造商:Infineon Technologies AG 功能描述:3-Phase Bridge Driver T/R 制造商:Infineon Technologies AG 功能描述:3-Phase Bridge Driver 36-Pin DSO T/R 制造商:Infineon Technologies AG 功能描述:DRIVER_IC - Tape and Reel
TLE6280GPCUMA1 制造商:Infineon Technologies AG 功能描述:DRIVER_IC - Tape and Reel
TLE6280GPNT 制造商:Infineon Technologies AG 功能描述:3-Phase Bridge Driver 36-Pin DSO
TLE6280GP-T 功能描述:功率驱动器IC GATE DRIVER ICS FOR EXTERNAL MOSFETS RoHS:否 制造商:Micrel 产品:MOSFET Gate Drivers 类型:Low Cost High or Low Side MOSFET Driver 上升时间: 下降时间: 电源电压-最大:30 V 电源电压-最小:2.75 V 电源电流: 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 封装:Tube