- 您现在的位置：买卖IC网 > PDF目录18505 > TLF14CB2221R2K1 (Taiyo Yuden)CHOKE COMMON MODE 2200UH PDF资料下载
参数资料
| 型号： | TLF14CB2221R2K1 |
| 厂商： | Taiyo Yuden |
| 文件页数： | 8/9页 |
| 文件大小： | 0K |
| 描述： | CHOKE COMMON MODE 2200UH |
| 标准包装： | 500 |
| 系列： | TLF14CB |
| 滤波器类型： | 电源线 |
| 线路数： | 2 |
| 电感： | 2.2mH |
| 电流： | 1.2A |
| DC 电阻(DCR)： | 最大 180 毫欧 |
| 安装类型： | 通孔 |
| 尺寸/尺寸： | 0.867" L x 0.669" W（22.00mm x 17.00mm） |
| 高度（最大）： | 0.906"（23.00mm） |
| 封装/外壳： | 垂直式，4 PC 引脚 |
| 工作温度： | -25°C ~ 105°C |
| 包装： | 散装 |
| 其它名称： | 587-2808 |
LEADED COMMON MODE CHOKE COILS FOR DC AND SIGNAL LINES，
LEADED COMMON MODE CHOKE COILS FOR AC LINES
■ PRECAUTIONS
1. Circuit Design
◆Operating environment
1. The products described in this specification are intended for use in general electronic equipment, (office supply equipment,
Precautions
telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical
equipment or systems requiring special quality and high reliability (traffic systems, safety equipment, aerospace systems, nuclear
control systems and medical equipment including life-support systems) where product failure might result in loss of life, injury or
damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
2. PCB Design
Precautions
Technical
considerations
◆Design
1. Please design insertion pitches as matching to that of leads of the component on PCBs.
◆Design
1. When Inductors are mounted onto a PC board, hole dimensions on the board should match the lead pitch of the component, if not, it will
cause breakage of the terminals or cracking of terminal roots covered with resin as excess stress travels through the terminal legs.
3. Soldering
◆Wave soldering
1. Please refer to the specifications in the catalog for a wave soldering.
2. Do not immerse the entire inductor in the flux during the soldering operation.
◆Lead free soldering
1. When using products with lead free soldering, we request to use them after confirming of adhesion, temperature of resistance to
Precautions
Technical
considerations
soldering heat, etc. sufficiently.
◆Recommended conditions for using a soldering iron
? Put the soldering iron on the land-pattern.
? Soldering iron's temperature - Below 350℃
? Duration - 3 seconds or less
? The soldering iron should not directly touch the product.
◆Lead free soldering
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently
degrade the reliability of the products.
◆Recommended conditions for using a soldering iron
If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade
the reliability of the products.
4. Cleaning
◆Cleaning conditions
Precautions
1. TLF type
Please contact any of our offices for about a cleaning.
5. Handling
◆Handling
1. Keep the product away from all magnets and magnetic objects.
◆Mechanical considerations
1. Please do not give the product any excessive mechanical shocks.
Precautions
Technical
considerations
2. TLF type
Please do not add any shock or power to a product in transportation.
◆Packing
1. Please do not give the product any excessive mechanical shocks.
In loading, please pay attention to handling indication mentioned in a packing box (a loading direction / number of maximum loading /
fragile item).
◆Handling
1. There is a case that a characteristic varies with magnetic influence.
◆Mechanical considerations
1. There is a case to be damaged by a mechanical shock.
2. TLF type
There is a case to be broken by a fall.
◆Packing
1. There is a case that a lead route turns at by a fall or an excessive shock.
? This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
coil_leaded_prec_e-E02R01
相关PDF资料 |
PDF描述 |
|---|---|
| 21CX14-D01 | SWITCH LIMIT EXPLOSION PROOF |
| 3310C-101-503L | POT 50K OHM 9MM SQ PLASTIC |
| A1PCA1Y103K103 | SWITCH PUSHBUTTON SPDT 6A 250V |
| CSX750VKB24.576M-UT | OSCILLTR VCX 24.5760MHZ 3.3V SMT |
| 21CX14 | SWITCH LIMIT EXPLOSION PROOF |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TLF14CB2230R4 | 功能描述:共模滤波器/扼流器 COMMON MODE CHOKE COIL, 22000uH, BOX RoHS:否 制造商:TDK 电感: 阻抗:35 Ohms 容差: 最大直流电流:0.1 A 最大直流电阻:1.5 Ohms 自谐振频率: Q 最小值: 工作温度范围:- 25 C to + 85 C 端接类型:SMD/SMT 封装 / 箱体:0302 (0806 metric) 系列:TCE |
| TLF14CB2230R4K1 | 功能描述:共模滤波器/扼流器 COMMON MODE CHK COIL 22000uH RoHS:否 制造商:TDK 电感: 阻抗:35 Ohms 容差: 最大直流电流:0.1 A 最大直流电阻:1.5 Ohms 自谐振频率: Q 最小值: 工作温度范围:- 25 C to + 85 C 端接类型:SMD/SMT 封装 / 箱体:0302 (0806 metric) 系列:TCE |
| TLF14CB2721R1 | 功能描述:共模滤波器/扼流器 COMMON MODE CHOKE COIL, 27000uH, BOX RoHS:否 制造商:TDK 电感: 阻抗:35 Ohms 容差: 最大直流电流:0.1 A 最大直流电阻:1.5 Ohms 自谐振频率: Q 最小值: 工作温度范围:- 25 C to + 85 C 端接类型:SMD/SMT 封装 / 箱体:0302 (0806 metric) 系列:TCE |
| TLF14CB2730R4 | 功能描述:共模滤波器/扼流器 COMMON MODE CHOKE COIL, 27000uH, BOX RoHS:否 制造商:TDK 电感: 阻抗:35 Ohms 容差: 最大直流电流:0.1 A 最大直流电阻:1.5 Ohms 自谐振频率: Q 最小值: 工作温度范围:- 25 C to + 85 C 端接类型:SMD/SMT 封装 / 箱体:0302 (0806 metric) 系列:TCE |
| TLF14CB2730R4K1 | 功能描述:共模滤波器/扼流器 COMMON MODE CHK COIL 27000uH RoHS:否 制造商:TDK 电感: 阻抗:35 Ohms 容差: 最大直流电流:0.1 A 最大直流电阻:1.5 Ohms 自谐振频率: Q 最小值: 工作温度范围:- 25 C to + 85 C 端接类型:SMD/SMT 封装 / 箱体:0302 (0806 metric) 系列:TCE |
发布紧急采购，3分钟左右您将得到回复。