- 您现在的位置：买卖IC网 > PDF目录98260 > TLV5625ID (TEXAS INSTRUMENTS INC) SERIAL INPUT LOADING, 3 us SETTLING TIME, 8-BIT DAC, PDSO8 PDF资料下载
参数资料
| 型号： | TLV5625ID |
| 厂商： | TEXAS INSTRUMENTS INC |
| 元件分类： | DAC |
| 英文描述： | SERIAL INPUT LOADING, 3 us SETTLING TIME, 8-BIT DAC, PDSO8 |
| 封装： | PLASTIC, SOIC-8 |
| 文件页数： | 5/15页 |
| 文件大小： | 212K |
| 代理商： | TLV5625ID |
TLV5625
2.7V TO 5.5V LOW POWER DUAL 8BIT DIGITALTOANALOG
CONVERTER WITH POWER DOWN
SLAS233D JULY 1999 REVISED JULY 2002
13
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
APPLICATION INFORMATION
0.1
F
Analog Ground Plane
1
2
3
4
8
7
6
5
Figure 14. Power-Supply Bypassing
definitions of specifications and terminology
integral nonlinearity (INL)
The relative accuracy or integral nonlinearity (INL), sometimes referred to as linearity error, is the maximum
deviation of the output from the line between zero and full scale excluding the effects of zero code and full-scale
errors.
differential nonlinearity (DNL)
The differential nonlinearity (DNL), sometimes referred to as differential error, is the difference between the
measured and ideal 1 LSB amplitude change of any two adjacent codes. Monotonic means the output voltage
changes in the same direction (or remains constant) as a change in the digital input code.
zero-scale error (EZS)
Zero-scale error is defined as the deviation of the output from 0 V at a digital input value of 0.
gain error (EG)
Gain error is the error in slope of the DAC transfer function.
signal-to-noise ratio + distortion (S/N+D)
S/N+D is the ratio of the rms value of the output signal to the rms sum of all other spectral components below
the Nyquist frequency, including harmonics but excluding dc. The value for S/N+D is expressed in decibels.
spurious free dynamic range (SFDR)
SFDR is the difference between the rms value of the output signal and the rms value of the largest spurious
signal within a specified bandwidth. The value for SFDR is expressed in decibels.
total harmonic distortion (THD)
THD is the ratio of the rms sum of the first six harmonic components to the rms value of the fundamental signal
and is expressed in decibels.
相关PDF资料 |
PDF描述 |
|---|---|
| TLV5625CDG4 | SERIAL INPUT LOADING, 3 us SETTLING TIME, 8-BIT DAC, PDSO8 |
| TLV5625CDRG4 | SERIAL INPUT LOADING, 3 us SETTLING TIME, 8-BIT DAC, PDSO8 |
| TLV5625IDRG4 | SERIAL INPUT LOADING, 3 us SETTLING TIME, 8-BIT DAC, PDSO8 |
| TLV5625IDG4 | SERIAL INPUT LOADING, 3 us SETTLING TIME, 8-BIT DAC, PDSO8 |
| TLV5625IDR | SERIAL INPUT LOADING, 3 us SETTLING TIME, 8-BIT DAC, PDSO8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TLV5625IDG4 | 功能描述:数模转换器- DAC 8-Bit 2.5-12 us Dual DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| TLV5625IDR | 功能描述:数模转换器- DAC 8-Bit 2.5-12 us Dual DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| TLV5625IDRG4 | 功能描述:数模转换器- DAC 8-Bit 2.5-12 us Dual DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| TLV5626 | 制造商:TI 制造商全称:Texas Instruments 功能描述:2.7 V TO 5.5 V LOW POWER DUAL 8-BIT DIGITAL-TO-ANALOG CONVERTER WITH INTERNAL REFERENCE AND POWER DOWN |
| TLV5626CD | 功能描述:数模转换器- DAC Dual 8bit DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。