参数资料
型号: TLV62065DSG
厂商: TEXAS INSTRUMENTS INC
元件分类: 稳压器
英文描述: 2 A SWITCHING REGULATOR, 3400 kHz SWITCHING FREQ-MAX, PDSO8
封装: 2 X 2 MM, 0.75 MM HEIGHT, PLASTIC, WSON-8
文件页数: 9/26页
文件大小: 1182K
代理商: TLV62065DSG
c
1
=
= 50kHz
2
(1 H
10 F)
f
p
DIL + Vout
1 *
Vout
Vin
L
I
Lmax + Ioutmax )
DIL
2
www.ti.com
SLVSAC4 – NOVEMBER 2010
OUTPUT FILTER DESIGN (INDUCTOR AND OUTPUT CAPACITOR)
The internal compensation network of TLV62065 is optimized for a LC output filter with a corner frequency of:
The part operates with nominal inductors of 1.0H to 1.2 H and with 10F to 22F small X5R and X7R ceramic
capacitors. Please refer to the lists of inductors and capacitors. The part is optimized for a 1.0H inductor and
10F output capacitor.
Inductor Selection
The inductor value has a direct effect on the ripple current. The selected inductor has to be rated for its dc
resistance and saturation current. The inductor ripple current (
ΔIL) decreases with higher inductance and
increases with higher VI or VO.
Equation 1 calculates the maximum inductor current in PWM mode under static load conditions. The saturation
current of the inductor should be rated higher than the maximum inductor current as calculated with Equation 2.
This is recommended because during heavy load transient the inductor current rises above the calculated value.
(1)
(2)
With:
f = Switching Frequency (3MHz typical)
L = Inductor Value
ΔIL = Peak-to-Peak inductor ripple current
ILmax = Maximum Inductor current
A more conservative approach is to select the inductor current rating just for the switch current limit ILIMFof the
converter.
The total losses of the coil have a strong impact on the efficiency of the DC/DC conversion and consist of both
the losses in the dc resistance R(DC) and the following frequency-dependent components:
The losses in the core material (magnetic hysteresis loss, especially at high switching frequencies)
Additional losses in the conductor from the skin effect (current displacement at high frequencies)
Magnetic field losses of the neighboring windings (proximity effect)
Radiation losses
Table 2. List of Inductors
DIMENSIONS [mm3]
INDUCTANCE m
mH
INDUCTOR TYPE
SUPPLIER
3.2 x 2.5 x 1.0 max
1.0
LQM32PN (MLCC)
Murata
3.7 x 4 x 1.8 max
1.0
LQH44 (wire wound)
Murata
4.0 x 4.0 x 2.6 max
1.2
NRG4026T (wire wound)
Taiyo Yuden
3.5 x 3.7 x 1.8 max
1.2
DE3518 (wire wound)
TOKO
Output Capacitor Selection
The advanced fast-response voltage mode control scheme of the TLV62065 allows the use of tiny ceramic
capacitors. Ceramic capacitors with low ESR values have the lowest output voltage ripple and are
recommended. The output capacitor requires either an X7R or X5R dielectric. Y5V and Z5U dielectric capacitors,
aside from their wide variation in capacitance over temperature, become resistive at high frequencies and may
not be used. For most applications a nominal 10F or 22F capacitor is suitable. At small ceramic capacitors, the
DC-bias effect decreases the effective capacitance. Therefore a 22F capacitor can be used for output voltages
higher than 2V, see list of capacitors.
Copyright 2010, Texas Instruments Incorporated
17
Product Folder Link(s) :TLV62065
相关PDF资料
PDF描述
TC1132VNB713 SPECIALTY ANALOG CIRCUIT, PDSO3
TRF3761-DIRHARG4 PLL FREQUENCY SYNTHESIZER, 104 MHz, PQCC40
TC125331TR 0.4 A SWITCHING REGULATOR, 115 kHz SWITCHING FREQ-MAX, PDSO5
TQD080Z2.0-A3V 2-OUTPUT 100 W DC-DC REG PWR SUPPLY MODULE
TQD080Z2.0-A91H 2-OUTPUT 100 W DC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
TLV62065DSGR 功能描述:直流/直流开关转换器 3MHz 2A Step Down Converter RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT
TLV62065DSGT 功能描述:直流/直流开关转换器 3MHz 2A Step Down Converter RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT
TLV62065EVM719 制造商:Texas Instruments 功能描述:TLV62065EVM719
TLV62065EVM-719 功能描述:电源管理IC开发工具 TLV62065 Eval Mod RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V
TLV62065-Q1 制造商:TI 制造商全称:Texas Instruments 功能描述:3-MHz 2-A Step-Down Converter in 2-mm x 2-mm SON Package