DO NOT
SCALE FROM
THIS PRINT
.157 3.99
REF
(No OF POS x .07874 [2.000])-.015
+.005
.03937 1.000
REF
.07874±.0040 2.00±0.10
(No OF POS x .07874[2.000]) - .07874[2.000]
REF
2 MAX SWAY
(EITHER DIRECTION)
TMMX-XX-D-X
02
01
100
99
C1
[.13]
[.38]
.020
SQ
0.50
REF
.0790
REF
2.007
"A"
CONTACT AREA
(SEE NOTE 4)
2 MAX SWAY
(EITHER DIRECTION)
T-1S13-XX-XX-2
.277
REF
7.04
(SEE NOTE 7)
.06
REF
1.5
.099-.002
+.005 2.52
-0.05
+0.13
(SEE NOTE 2)
90°±3°
2 MAX SWAY
(EITHER DIRECTION)
.004[.10]
BV
SPECIFY POS -XXX TO BE OMITTED
POLARIZATION
LEAD STYLE
-DV: DOUBLE VERTICAL
(USE TMMX-50-D-X-XX)
ROW OPTION
-M: PICK & PLACE PAD (USE PPP-10)
(SEE FIG 3; 5 POS MIN)
(-T, -TM PLATING WITH -M AVAILABLE TO EXISTING CUSTOMERS
ONLY AS OF REV BV. DO NOT DESIGN IN.)
-TR: TAPE & REEL PACKAGING
(36 POS MAX CONTACT SAMTEC FOR LARGER POSITIONS.)
-ES: END SHROUDS (SEE FIG 4, SHT 2, 9 POS MIN)
-EC: LOCKING CLIP (SEE FIG 6, SHT 3, 9 POS MIN, DO NOT USE WITH
-A OR -LC, SEE NOTE 8)
-EP: GUIDE POST (SEE FIG 9, SHT 2, 9 POS MIN)
-EL:
BOARD LOCK (SEE FIG 5, SHT 2, 9 POS MIN)
-LC: FLEX MOLD LOCKING CLIP (USE LC-09-TM, SEE FIG 2, SHEET 2,
5 POS MIN, SEE NOTE 8)
-A:
ALIGNMENT PIN (USE TMMH-50-D-A-XX, SEE FIG 2, SHEET 2
3 POS MIN)
-EBC: BOARD LOCK WITH LOCKING CLIP (SEE FIG 8 SHT 2, 9 POS MIN
NOT AVAILABLE WITH -A OR -LC, SEE NOTE 8)
-EPC: GUIDE POST WITH LOCKING CLIP (SEE FIG 7, SHT 3, 9 POS MIN
NOT AVAILABLE WITH -A OR -LC, SEE NOTE 8)
OPTIONS
PLATING
-01: .126 [3.20]
(USE T-1S13-07-XX-2)
-04: .075 [1.91]
(USE T-1S13-04-XX-2)
-05: .065 [1.65] MIN
(USE T-1S13-20-XX-2)
-02 THRU -50
(PER ROW)
No OF POS
-L: 15" LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-F: 3" FLASH GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-S: 30" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-G: 20" GOLD IN CONTACT AREA, 3" MIN GOLD ON TAIL
-T: MATTE TIN ON CONTACT AND TAIL
-H: 30" HEAVY GOLD IN CONTACT AREA, 3" MIN GOLD ON TAIL
-TM: MATTE TIN CONTACT AND TAIL
-LM: 15" LIGHT SECLECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-SM: 30" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-FM: 3" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
TMMH-1XX-XX-XX-DV-XXX-XXX
**
** ALL OPTIONS EXCEPT THE -EX OPTIONS
USE THE TMMC-50-D-X-XX
-EX OPTIONS USE THE TMMH-50-D-X-XX
C
FIG 1
(TMMH-150-XX-XX-DV SHOWN)
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
ANGLES
.XX: .01[.3]
2
.XXX: .005[.13]
.XXXX: .0020[.051]
2MM X 2MM TERMINAL STRIP ASSEMBLY
BY:
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
PURVIS
10/08/1996
4
1
SHEET SCALE: 1:1
F:\DWG\MISC\Mktg\TMMH-1XX-XX-XX-DV-XXX-XXX-MKT.SLDDRW
MATERIAL:
BODIES:
LCP, UL 94 VO
COLOR: BLACK
TERMINAL:
PHOSPHOR BRONZE, ALLOY
MAX. CUT FLASH: .020 [.51]
NOTES:
1.
REPRESENTS A CRITICAL DIMENSION.
2. MEASURED AT BEND RADIUS, NOT AT END OF PIN.
3. TUBE ONLY -05 THROUGH -50 POSITIONS.
4. GOLD PLATING TO BE ON POST, TIN PLATING ON TAIL.
5. PARTS MAY BE CUT TO POSITION.
6. MINIMUM PUSHOUT FORCE: 1.0 LB.
7. SURFACE MOUNT TAILS TO BE SHEARED TO
DIMENSION ON STYLE -05 ONLY.
8. DUE TO THE HIGH AMOUNT OF INSERTION FORCE
NEEDED, THE -LC OPTION IS NOT COMPATIBLE WITH
AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL
PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC,
-EC, -EBC AND -EPC OPTIONS.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
TMMH-1XX-XX-XX-DV-XXX-XXX-MKT
REVISION BV