参数资料
型号: TMP87P808NG
元件分类: 微控制器/微处理器
英文描述: 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PDIP28
封装: 0.400 INCH, 1.78 MM PITCH, LEAD FREE, PLASTIC, SDIP-28
文件页数: 20/26页
文件大小: 1085K
代理商: TMP87P808NG
TMP87P808
II
2008-03-06
1. Part number
2. Package code and dimensions
Previous Part Number
(in Body Text)
Previous Package Code
(in Body Text)
New Part Number
New Package Code
OTP
TMP87P808N
P-SDIP28-400-1.78
TMP87P808NG
SDIP28-P-400-1.78
TMP87P808M
P-SOP28-450-1.27
TMP87P808MG
SOP28-P-450-1.27B
TMP87P808LN
P-SDIP28-400-1.78
TMP87P808LNG
SDIP28-P-400-1.78
TMP87P808LM
P-SOP28-450-1.27
TMP87P808LMG
SOP28-P-450-1.27B
*: For the dimensions of the new package, see the attached Package Dimensions diagram.
3. Addition of notes on lead solderability
The following solderability test is conducted on the new device.
Lead solderability of Pb-free devices (with the G suffix)
Test
Test Conditions
Remark
Solderability
(1) Use of Lead (Pb)
solder bath temperature
= 230°C
dipping time
= 5 seconds
the number of times
= once
use of R-type flux
(2) Use of Lead (Pb)-Free
solder bath temperature
= 245°C
dipping time
= 5 seconds
the number of times
= once
use of R-type flux
Leads with over 95% solder coverage
till lead forming are acceptable.
4. RESTRICTIONS ON PRODUCT USE
The following replaces the “RESTRICTIONS ON PRODUCT USE” on page 1 of body text.
RESTRICTIONS ON PRODUCT USE
20070701-EN
The information contained herein is subject to change without notice.
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety
in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such
TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer,
personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These
TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high
quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury
(“Unintended Usage”).
Unintended Usage include atomic energy control instruments, airplane or spaceship
instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical
instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall
be made at the customer’s own risk.
The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
The information contained herein is presented only as a guide for the applications of our products. No responsibility
is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its
use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third
parties.
Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations that
regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring
as a result of noncompliance with applicable laws and regulations.
For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3 of the chapter
entitled Quality and Reliability Assurance/Handling Precautions.
相关PDF资料
PDF描述
TMP87PM14FG 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PQFP64
TMP88CM38AFG 8-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP44
TMP88CP76F 8-BIT, MROM, 12.5 MHz, MICROCONTROLLER, PQFP80
TMP89FH42UG 8-BIT, FLASH, 10 MHz, MICROCONTROLLER, PQFP44
TMP91FW60FG MICROCONTROLLER, PQFP100
相关代理商/技术参数
参数描述
TMP87P808NG(Z) 制造商:Toshiba America Electronic Components 功能描述:
TMP87P809M 制造商:Toshiba America Electronic Components 功能描述:MicroController, 8-Bit, 28 Pin, Plastic, SOP
TMP87P809MG 制造商:Toshiba America Electronic Components 功能描述:
TMP87P809N 制造商:TOSHIBA 制造商全称:Toshiba Semiconductor 功能描述:CMOS 8-bit Microcontroller
TMP87P809NG 制造商:Toshiba America Electronic Components 功能描述: